Overview
be quiet! Light Wings LX 120mm PWM Reverse WHITE 1 — Reverse blade ARGB case fan optimized for intake.
That is how the product is listed. It is a white, reverse-blade 120mm ARGB fan from be quiet!, the German cooling and power supply brand, and the trailing '1' in the name means a single-fan pack.
In short, it is built for glass-panel builds where you want front, bottom or side intake fans to show their clean front face toward the inside of the case. It is not meant for exhaust duty or for thick radiators that need high static pressure.
The key specs are a standard 120×120×25 mm frame, 1,500 RPM max, 12 V DC, a rifle bearing rated for 60,000 hours, 16 LEDs, and two separate connectors: a 4-pin PWM cable and a 3-pin 5V ARGB cable. On Amazon.co.Check the retailer's page for the latest user reviews.
Airflow, static pressure and noise figures are not included in our data. If you want to compare those numbers, check the manufacturer's product page.
This article focuses on what the specs actually tell you and the mistakes people commonly make with reverse fans.
What a Reverse-Blade Fan Is and Why It Is Intake-Only
A regular case fan pulls air in through its open, blade-side face and pushes it out through the side with the motor struts. Mounted as a front intake, the strut side faces into the case, so through a glass panel you see struts and labels rather than the blades.
A reverse-blade fan mirrors the blade shape and spin direction, which reverses the airflow. It pulls air through the strut side and blows it out of the open face, so the clean side faces inward even in an intake position.
The compatibility data describes this model as intake-only, so think of it as an aesthetic choice rather than a cooling upgrade.
That also means it does not cool better than the standard version. Where looks do not matter, such as a rear exhaust or a position hidden behind a panel, a standard fan is fine.
Pairing Reverse fans for intake with standard Light Wings LX fans for exhaust gives you a matching front face everywhere you look.
Compatibility Guide
| Item | This fan | What to check |
|---|---|---|
| Size | 120×120×25 mm | A 120mm mount on the case or radiator; 25mm is the standard thickness |
| Power and speed control | 4-pin PWM (12V) | A PWM-capable motherboard header (CPU_FAN, SYS_FAN or CHA_FAN) or a PWM fan hub |
| Lighting | 3-pin ARGB (5V) | A 5V ARGB motherboard header or a 5V ARGB controller |
| Chaining | ARGB daisy-chain | Only with other Light Wings LX fans |
| Orientation | Reverse (intake only) | Front, bottom or side intake positions |
The lighting cable matters most. This is a 5V 3-pin ARGB fan, so plugging it into a 12V 4-pin RGB header can damage the LEDs.
Motherboard makers label 5V ARGB headers differently (ARGB, ADD_GEN2, JRAINBOW and so on), so confirm the voltage in your manual before connecting anything.
Speed control uses 4-pin PWM. You can physically plug it into a 3-pin DC header, but PWM control will not work, and depending on your BIOS settings the fan may run near full speed.
For quiet operation, use a PWM-capable header or hub.
Because this is a single-fan pack, a three-fan front intake means buying three units. ARGB can be daisy-chained into one cable, but the ARGB chain is the only linking feature our data confirms.
Plan to connect each fan's PWM lead separately, or use a splitter or fan hub. Check your board's current limit per fan header, and whether it limits the number of LEDs per ARGB header: each fan has 16 LEDs, so multiply by the number of fans you chain.
Also check physical clearance. A side intake can hit GPU power cables or a tall CPU cooler, and a bottom intake needs room between the fan, the dust filter and the floor.
On a radiator, add 25mm to the radiator thickness and make sure the total fits your case.
Product Info
| Item | Value |
|---|---|
| Fan size | 120×120×25 mm |
| Max speed | 1,500 RPM |
| Rated voltage | 12 V DC |
| Bearing | Rifle bearing |
| Life expectancy | 60,000 hours |
| LED count | 16 |
| Connectors | 4-pin PWM + 3-pin ARGB (5V) |
| Pack quantity | 1 |
On Amazon.co.Check the retailer's page for the latest price.
An eBay listing showed $23.63 on July 14, 2026, but international orders can add shipping and import fees.
Prices change often with sales and stock, so check the current price on the product page before you buy.
A rifle bearing is an improved sleeve bearing: a spiral groove circulates lubricant to reduce wear and noise. 60,000 hours works out to about 6.8 years of nonstop use, but that is the manufacturer's rated lifespan, not the warranty.
Check the local distributor's terms for warranty length and conditions.
A 1,500 RPM maximum is a mid-range ceiling for a 120mm fan and typical of quiet-focused models. A PWM fan curve lets you run it slower day to day.
The trade-off is that it is not built to match high-RPM fans on airflow or pressure at full speed.
Alternatives
| Product | Focus | How it differs |
|---|---|---|
| be quiet! Light Wings LX 120mm PWM Reverse WHITE | Reverse-blade ARGB intake, white | Lights up from a standard 5V ARGB header and is sold as a single fan |
| Lian Li UNI FAN TL Reverse Blade ARGB | Reverse-blade ARGB intake | Also reverse-blade, but designed around Lian Li's own linking and control system |
| Corsair LL120 RGB White | White, lighting-focused | Built around Corsair's control ecosystem, while this fan works with generic motherboard headers |
| NZXT F120P v2 White | White, quiet and pressure-focused | Prioritizes pressure over lighting, so it fits radiators better |
| Thermaltake TOUGHFAN 12 Pro | No LEDs, high RPM, high pressure | Trades looks for cooling; suits thick radiators and hot builds |
This fan's main strength is giving you the reverse-blade look without locking you into one brand's control system, so it works with whatever motherboard you already use. If you would rather run fans and lighting through a single proprietary hub, brands with their own linking systems give you tidier cables.
Recommended Users
- Glass-panel builders who want intake fans to show their front face: front, bottom and side intakes all face their blades and LEDs inward. It is a natural fit for showcase cases.
- All-white builds: you avoid dark strut sides breaking up a white case or motherboard.
- People who manage lighting from motherboard software: it runs on a generic 5V ARGB header, with no extra controller.
- Moderate-heat systems that should stay quiet: 1,500 RPM max with PWM control suits intake duty in mid-range gaming builds.
Before You Buy
Do not use it for exhaust. It is intake-only.
In a rear or top exhaust position the reverse design is pointless, so choose the standard-blade Light Wings LX there. Once everything is installed, check that air flows one way through the case (in at the front, out at the rear and top).
Holding a tissue near each fan is an easy test.
It may lack pressure for demanding jobs. With no static-pressure data and a 1,500 RPM ceiling, it may not cool enough on thick, dense radiators or in hot CPU and GPU builds.
For AIO radiators, consider pressure-focused models such as the NZXT F120P v2 or Thermaltake TOUGHFAN 12 Pro.
Daisy-chaining only works within the Light Wings LX series. To mix it with other brands' ARGB fans, use a separate ARGB header, a 5V ARGB splitter or a controller.
It is a single fan. The '1' in the name means one unit.
Budget for the full count, and make sure you have enough PWM headers, before you order.
Check that you are ordering the right variant. Store pages may list Reverse and standard, white and black, and single and multi-packs as options on one page.
Confirm that 'Reverse' and 'WHITE' are in the product name and that the frame in the photo is white. The Amazon manufacturer and ASIN below do match this product.
FAQ
Q. Can I flip it and use it as exhaust? A.
You may be able to mount it that way, but it is designed as an intake fan. As an exhaust it looks no different from a standard fan, so pick the standard-blade version for exhaust.
**Q. My motherboard has no ARGB header. A. The fan will run on 4-pin PWM, but the LEDs will stay off. A separate 5V ARGB controller will light it. Never use a 12V RGB header.
Q. How many cables do three fans need? A.
ARGB chains into one cable. PWM needs one lead per fan, so use a splitter or hub if you are short on headers.
Q. Can I put it on an AIO radiator? A.
It fits any 120mm mount, but with no published static pressure and a modest top speed, a pressure-focused fan is the safer choice when cooling comes first.
Q. Is it loud? A.
Our data has no noise figures, so we cannot give a number. Its 1,500 RPM ceiling is quiet-oriented, and a PWM curve keeps everyday noise even lower.
Product Disclosure (Amazon)
- Manufacturer: be quiet!
- ASIN: B0F1WF9JT1
- Note: This article covers a manufacturer-made product based on Amazon listing details.





