This article covers NZXT F120P v2 White 静音・風圧強化タイプ PCケースファン 120mm RF-P12SF-W2 FN2273.

Overview

The NZXT F120P v2 White is a 120mm case fan designed for high static pressure and quiet operation. It's built to push air through tight spaces like radiator fins and heatsinks, making it a solid choice for CPU cooler or AIO radiator setups. The fan spins at up to 2000 RPM, delivering 73.47 CFM of airflow with a static pressure of 4.5 mmH₂O, all while keeping noise at a maximum of 30 dBA.
PWM control allows the fan to adjust speed dynamically between 500 and 2000 RPM based on system temperature. A fluid dynamic bearing (FDB) ensures a rated lifespan of 60,000 hours and low mechanical noise. The all-white finish matches well with light-themed PC builds, and rubber corner pads help dampen vibration.
The package includes just four mounting screws and no RGB lighting, reinforcing its focus on pure cooling performance and silence. Priced at around ¥1,500 in Japan, it sits in the mid-range segment, offering a balance of performance and value.

Compatibility Guide

This fan fits any standard 120mm mounting hole pattern, which is found in virtually all ATX, MicroATX, and MiniITX cases. Its 25mm thickness means it can be installed on most 240mm, 280mm, and 360mm radiators without clearance issues.
The 4-pin PWM connector plugs into any standard fan header on the motherboard. If your motherboard only has 3-pin headers, the fan will run at full speed or can be controlled via DC voltage if the board supports it. Power draw is minimal at 0.18A (2.16W), so multiple fans can share a single header via a splitter or hub, as long as the total current stays within the header's limit (typically 1A for most motherboards).

Product Info

The NZXT F120P v2 White launched in early 2024 as a mid-range, no-frills cooling fan. It's positioned between budget RGB fans and premium silent models like Noctua's offerings. The warranty is 2 years, and the fan is available through major online retailers like online retailers.
Key specs include: dimensions 120×120×25 mm, weight ~160 g, speed range 500–2000 RPM (±200 RPM), airflow 73.47 CFM, static pressure 4.5 mmH₂O, noise level 30 dBA, bearing type FDB, cable length 600 mm. The fan uses a 4-pin PWM connector.
Compared to competitors like the be quiet! Silent Wings 4, the F120P v2 offers slightly lower static pressure but at a significantly lower price point. It's a strong choice for builders who want reliable, quiet cooling without spending extra on RGB or excessive branding.

Best Use Cases

  1. Quiet general-purpose cooling
    The FDB bearing keeps noise low, and PWM ensures the fan only spins up when needed. Ideal for office PCs, HTPCs, or any build where silence is a priority. If you need absolute near-silence, consider a fan with a lower max RPM or larger size (140mm).
  2. Radiator or heatsink cooling
    With 4.5 mmH₂O static pressure, this fan can push air effectively through standard 240mm radiators and air cooler fin stacks. It works well in push/pull configurations. For thick radiators (over 45mm) or high-heat CPUs (e.g., AMD Ryzen 9 or Intel Core i9), you might want a fan with higher static pressure, such as the Noctua NF-F12.
  3. White-themed PC builds
    The clean white frame and white rubber corners blend beautifully into all-white builds. Pair it with white cable extensions and white case for a cohesive look. If your build uses black components, the white fan may stand out too much.

Things to Consider

This fan has no RGB lighting, so if you're after aesthetic effects, look elsewhere. The 73.47 CFM max airflow is decent but not exceptional; for case intake/exhaust in a high-airflow setup, you might prefer a high-airflow model like the NZXT F120Q or Arctic P12.
The 30 dBA noise rating is measured under ideal conditions; in a case with restrictive grilles, sound levels may be slightly higher. Rubber corners do reduce vibration, but if your case has poor vibration damping, some resonance might still occur.
Pricing around ¥1,500 is good for the performance, but there are cheaper options like the Arctic P12 series ($8-10) that offer similar specs. The NZXT brand and build quality justify the premium for brand-loyal builders.

FAQ

Q: Can I use this fan on a CPU air cooler?
A: Yes, if your cooler uses a 120mm fan, you can replace it with the F120P v2. Just ensure the cooler's mounting clips or screws are compatible with a standard 120mm frame.
Q: Does this fan work with a 3-pin motherboard header?
A: Physically, yes. It will run at full speed if the header only provides 3-pin DC control. Some motherboards allow DC voltage control even on 4-pin headers, but you'll lose automatic PWM adjustment.
Q: How many of these can I connect to one motherboard header via a splitter?
A: Each fan draws about 0.18A (180mA). Most motherboard fan headers can deliver 1A, so theoretically you can connect up to 5 fans via a PWM splitter without exceeding the limit. For more than 5, use a powered fan hub.