This article covers MSI MAG VAMPIRIC 010 ATXケース 強化ガラス ブラック.

Overview

MSI's MAG VAMPIRIC 010 is a full-tower ATX case designed for gaming PC builders who want a balance of affordability, cooling capability, and clean aesthetics. The side panel is made of 4mm tempered glass, giving you a clear view of your components. It supports CPU coolers up to 167mm tall and radiators up to 360mm in the front. One 120mm ARGB fan is included, so you can start building with a bit of lighting right away. This case sits in the mid-range segment, offering enough room for high-end hardware without breaking the bank.
The front panel provides a single USB 3.1 Gen 1 Type-A port and audio jacks. Cable management is decent, with ample space behind the motherboard tray. While not the most feature-rich case on the market, it covers the essentials for a solid gaming build. The overall build quality is good for the price point, with sturdy steel panels and a well-painted interior.

Compatibility Guide

  • Motherboard: Supports standard ATX, Micro-ATX, and Mini-ITX boards. The standoff placement is standard for ATX.
  • CPU Cooler: Maximum height is 167mm. High-end air coolers like the Noctua NH-D15 (165mm) should fit, but clearance is tight. Double-check your motherboard's CPU socket location.
  • Radiator Support: Front: up to 360mm (triple 120mm fans). Top: up to 240mm (dual 120mm fans). Rear: single 120mm. Thickness of radiator and fans need to be considered – standard 25mm fans + 30mm radiator work fine.
  • Graphics Card: No official maximum length stated. Practically, most cards up to 330mm fit. However, if you install a front radiator, the remaining space may be limited to around 300mm.
  • Power Supply: Standard ATX PSU, bottom-mounted. Length up to 160mm should be fine with proper cable management.
  • Storage: Multiple 2.5″ and 3.5″ drive mounts are included (exact count not specified, but enough for a gaming rig).

Product Info

The MAG VAMPIRIC 010 launched around 2019 and has become a popular choice for budget-conscious builders. Pricing on online retailers is approximately ¥49,000 (USD ~$330), though it fluctuates. Warranty is typically 1 year (verify with seller). This case targets the mid-range market – it’s not as premium as Fractal Design or as flashy as some NZXT models, but offers solid value with an included RGB fan and tempered glass. It’s best suited for builders who want a simple, functional case without spending a lot.

Best Use Cases

  • First-time PC builder: The included fan and straightforward interior layout make assembly easy. Cable routing is decent. Just remember to buy extra fans for proper airflow.
  • Mid-range gaming PC (e.g., RTX 4060 Ti + Ryzen 5): This case provides enough cooling and space for typical mid-range components. The 360mm radiator support allows future water cooling upgrades.
  • User who dislikes excessive RGB: The included fan is ARGB, but the front panel is clean and mesh-dominant. If you want a subtle interior with a glass side panel, this fits.
    Not for*: Enthusiasts needing 420mm radiator support or ultra-tall CPU coolers (over 170mm). Also not ideal if you need front USB-C.

Things to Consider

The 167mm CPU cooler height limit is a real constraint. High-end air coolers like the Noctua NH-D15 (165mm) just barely fit, but socket position on your motherboard may cause interference. Measure carefully or choose a cooler under 160mm. The included fan is only one (rear exhaust); you’ll need to buy additional fans for intake and possibly top exhaust to get good airflow. The front lacks a USB-C port, which may be a dealbreaker if you use modern devices regularly. Also, the price on online retailers has been known to spike – set a price alert if you’re not in a hurry.

FAQ

Q: Will an RTX 4080 fit in this case?
A: Likely yes, if you don’t install a front radiator. Cards up to around 330mm should fit. With a front 360mm radiator, the available GPU length drops to maybe 280-300mm. Check the exact dimensions of your GPU before buying.
Q: Is the side panel glass or acrylic?
A: It’s 4mm tempered glass, which is more scratch-resistant and clearer than acrylic. Handle with care as it can break if dropped.
Q: Can I mount a PSU with the fan facing up?
A: Yes, the PSU mounts at the bottom, and you can choose either fan-up or fan-down orientation. Fan-up might help with aesthetics but could affect cooling if the case sits on carpet. Use a dust filter underneath.

Product Disclosure (Amazon)

  • Manufacturer: MSI
  • Seller: Reg shop
  • Fulfilled by: Reg shop
  • ASIN: B07MZDP8QT
  • Note: This article covers a manufacturer-made product based on Amazon listing details.