This article covers MagniumGear (MG-NE620Q_DBK02) NEO Qube 2 デュアルチャンバー ATX ミッドタワー デジタルRGB照明 フロントI.

Overview

The MagniumGear NEO Qube 2 (MG-NE620Q_DBK02) is a dual-chamber ATX mid-tower case that prioritizes show-quality aesthetics and extensive water-cooling support. Its most defining feature is the interior separation into two distinct chambers: the main chamber houses the motherboard and GPU behind tempered glass panels, while the rear chamber hides power supply, drives, and cables. This design makes cable management effortless and ensures a pristine interior view. The case ships with a built-in D-RGB lighting controller, allowing instant customization without software. Cooling flexibility is equally impressive. The NEO Qube 2 supports up to three 360mm radiators simultaneously on the side, top, and bottom positions. All major panels use low-restriction mesh for unobstructed airflow, and the bottom includes a slide-out dust filter. Despite being a mid-tower, it can accommodate E-ATX motherboards (up to 280mm wide) and graphics cards up to 410mm long. This case is clearly aimed at enthusiasts who want a dual-chamber layout for clean builds and massive liquid-cooling potential.

Compatibility Guide

Motherboard support: E-ATX (max width 280mm), ATX, Micro-ATX, Mini-ITX. Note that E-ATX boards may partially obstruct cable routing holes, so plan wiring carefully. Maximum GPU length: 410mm. Nearly all current flagship GPUs fit with room to spare. CPU cooler height limit: 148mm. This is quite restrictive; most high-end air coolers exceed this. Water cooling or low-profile air coolers are required. PSU mounting: bottom-mounted, accepts units up to 275mm total length (155mm if a lower SSD bracket is used). Drive bays: 2x 3.5-inch (shared with 2.5-inch), 5x dedicated 2.5-inch (3 if using 3.5-inch bays). Radiator support: top/side/bottom each up to 360mm (120mm fan format). For 140mm radiators, top and bottom support up to 280mm.

Product Info

The NEO Qube 2 is a flagship model from MagniumGear, a brand under the Thermaltake Group. It has been available for several years and remains a strong seller on Japan at around ¥48,000. While it competes with premium dual-chamber cases like the Lian Li O11 Dynamic, its price point sits slightly lower, offering excellent value for the feature set. The built-in D-RGB controller supports manual control via front-panel buttons and can sync with compatible motherboard software (ASUS Aura Sync, Gigabyte RGB Fusion, etc.). Warranty details should be confirmed from the manufacturer.

Best Use Cases

Extreme water-cooling builds: The ability to mount three 360mm radiators simultaneously is rare. This case is perfect for builders who want to cool both CPU and GPU with multiple thick radiators. However, component selection and loop planning become critical due to the dual-chamber constraints. Cable-management perfectionists: The dual-chamber design hides all cables behind the motherboard tray, leaving the main compartment spotless. Great for builders who value internal aesthetics and don't want to spend hours tying down cables. Showcase PCs with RGB focus: The twin tempered-glass panels (front and left) provide an unobstructed view of the interior. Pair with RGB fans and a water block for a stunning visual effect. Not ideal for those who prefer massive air coolers or minimal RGB. Who should avoid: Anyone planning to use a tall air cooler (over 148mm), those needing many 3.5-inch HDDs, or users with limited desk space (the case is 450mm wide).

Things to Consider

The most significant limitation is the 148mm CPU cooler height cap. Most high-end tower coolers like the Noctua NH-D15 or be quiet! Dark Rock Pro 5 simply won't fit. This makes liquid cooling almost mandatory for powerful CPUs. Additionally, the case ships without any fans, so you must budget for at least three to nine 120mm or 140mm fans depending on your radiator configuration. E-ATX support exists but has caveats: the motherboard tray is 280mm wide, matching the maximum E-ATX width. Cable management holes may not align perfectly with some E-ATX boards. Check your board dimensions against the tray layout. The price, while competitive, places it against established competitors like the Lian Li O11 Dynamic EVO and Thermaltake View 71. The NEO Qube 2 offers a similar dual-chamber experience at a lower cost, but with tighter CPU cooler clearance. ## FAQ
Q: What is the maximum CPU cooler height? A: 148mm. Most high-end air coolers exceed this, so water cooling or low-profile air coolers are recommended. Q: Can the built-in RGB controller sync with my motherboard? A: Yes. The case includes a D-RGB extension cable and a motherboard sync header. Connect it to your motherboard's 3-pin ARGB header and use software like ASUS Aura Sync or GIGABYTE RGB Fusion. Q: How many fans are included with the case? A: None. All fans must be purchased separately. The case supports up to nine 120mm fans or six 140mm fans (depending o

Product Disclosure (Amazon)

  • Manufacturer: MagniumGear
  • Seller: Ｍitsumine store
  • Fulfilled by: Ｍitsumine store
  • ASIN: B07YFQ1TSL
  • Note: This article covers a manufacturer-made product based on Amazon listing details.