Power strips that slide around the desk, gather dust on the floor, or get yanked every time you vacuum — the Lekgavd self-adhesive power strip holder is a no-tools fix for those small daily annoyances. This article covers what the three-pack is actually good for, which surfaces hold and which don't, the size limits of the slide bracket, and how to read a review score based on only five ratings.
Overview
This is a set of three acrylic holders, each 93 × 35 mm, that mount with adhesive pads instead of screws. Because no drilling is required, the main audience is people who cannot make holes: renters, dorm residents, and anyone using a company-issued desk.
The only color option is white, which blends into pale walls and light wood desktops but will stand out against a black desk surface — worth knowing before you order.
The slide-in bracket means a mounted strip can be pulled back out, so this is easier to live with than zip ties or hook-and-loop straps if you rearrange your setup often. The three-piece pack also makes sense in practice: you rarely want to lift only the power strip off the floor.
Routers, remotes, and AC adapters are usually waiting for the same treatment.
Compatibility Guide
There is no electrical compatibility to worry about here. Only two questions matter: is the surface suitable, and does the object you want to hold fit?
Adhesive pads reach their rated grip only on smooth, non-porous surfaces — glass, tile, painted metal, laminated desktops, and slick plastics.
| Surface | Fit | Notes |
|---|---|---|
| Glass, tile, laminate | Good | Degrease first for full grip |
| Painted metal, plastic | Good | Works on PC case side panels too |
| Painted drywall | Conditional | May lift paint or wallpaper on removal |
| Textured wall coverings | Poor | Too little contact area |
| Bare wood, fabric, rough finishes | Poor | Adhesive gradually peels away |
Clean the surface of oil and dust with alcohol, press firmly for a good several seconds, and avoid loading the holder until the adhesive has cured — around 24 hours is the usual guideline. Those three habits change the outcome more than anything else.
In cold rooms the adhesive stiffens and initial bonding suffers, so mount at normal indoor temperature.
On sizing, the original listing describes the slide bracket opening as roughly 5 mm. Typical household power strips are 25–40 mm thick, so that figure most likely refers to the bracket material or the lip depth rather than the maximum strip thickness.
Check the dimension drawing on the product page before buying, and measure the thickness, width, and weight of the strip you actually own so you can compare directly.
Product Info
The spec sheet is short: acrylic construction, 93 × 35 mm per holder, white, three per pack. No tools or extra parts are needed, and the adhesive pads arrive pre-attached.
Acrylic looks tidy and resists yellowing, but it has no flex — force a stuck strip out sideways and it can crack rather than bend.
Pricing deserves care. As captured on 7 June 2026, the Amazon.co.jp listing showed ￥7,657.
That is on the high side for a small accessory of this type, and listings like this move a lot with sales, coupons, and seller changes. Treat the figure above as a snapshot from that date and check the live price on the product page before buying. The secondary marketplace channel returned no concrete figure, so it is not usable for comparison.
The rating stood at 3.7 stars from 5 reviews (74%) at capture time.
The sample size matters more than the number itself. With five ratings, a single unhappy buyer swings the average, so neither "below average quality" nor "safely well received" is a supportable conclusion.
Adhesive products split hard on surface type and installation care, so reading what surface each reviewer mounted to tells you far more than the star count.
Best Use Cases
- Renters and dorm residents — no screw holes means no repair work at move-out. That said, if wallpaper is your only candidate surface, prefer furniture sides over walls.
- Anyone tidying under-desk cabling — lifting the strip off the floor makes vacuuming easier and reduces dust buildup around live contacts, a genuine fire-risk factor over time.
- People fixing several small devices — three holders let you treat the strip, the router, and an adapter the same way. Handy in setups where a NAS or mini PC keeps adding power bricks.
- Frequent rearrangers — the slide bracket releases without cutting anything.
Conversely, if you need to permanently mount a heavy metal-bodied strip, if textured wall is your only option, or if you must stick directly to rental wallpaper, screw-in brackets or removable-adhesive hooks are the better tool.
Before You Buy
The most common failure in this category is confusing "it sticks" with "it keeps holding." Adhesive pads bond instantly but creep loose over weeks or months under load, temperature swings, and marginal surfaces.
Power strips are worse than static loads because every plug insertion and removal pulls on the mount — orient the strip so that plugging force does not act in the peel direction of the pad.
Second, removal risk. Strong adhesive on vinyl wallpaper or painted drywall can take the top layer with it.
"No drilling" does not automatically mean "no damage." Test somewhere inconspicuous, or better, mount to a desk leg, side panel, or cabinet flank instead of the wall.
Third, the material. Acrylic looks good but fails abruptly under impact or twisting.
Steady the bracket with one hand when removing a strip and keep lateral force off the holder.
Fourth, heat and placement. Power strips warm up in use and adhesive softens when hot.
Avoid spots near heaters, sunlit windowsills, and sealed pockets under a desk — bad for both grip and the device's own cooling. Also check that wall mounting does not point the strip's vents into the surface.
Finally, listing accuracy. Accessories in this price band change sellers often, and the published dimensions, quantity, or price occasionally fail to match what ships.
Compare the product images, title, and dimension figures before ordering to confirm it is the item you have in mind — especially the bracket opening figure discussed above, which is worth verifying visually rather than taking at face value.
FAQ
Q. Can I reposition them repeatedly? A.
Treat the pads as single-use. Once peeled, dust contaminates the adhesive and grip drops noticeably.
Keep strong double-sided tape on hand if you expect to move things.
Q. How much weight will they hold? A.
No load rating is provided. Real capacity varies with surface, cleanliness, and temperature, so spread heavy items across multiple holders and watch the mount for a few days before trusting it.
Q. Are they safe on drywall?
A. They usually hold, but removal may damage paint or wallpaper. In a rental, mount to furniture instead.
Q. I only need one — can I buy fewer? A.
It ships as a three-pack only. In practice, more things to mount tend to appear later, so spares rarely go to waste.
Q. Can I use them for anything other than power strips? A.
Yes, within size and weight limits — remotes, compact routers, or coiled cable. Measure thick devices first, since the bracket opening is the binding constraint.
Product Disclosure (Amazon)
- Manufacturer: Lekgavd
- Seller: EastEyeWorks
- Fulfilled by: EastEyeWorks
- ASIN: B0FWCF2GQS
- Note: This article covers a manufacturer-made product based on Amazon listing details.
