This article covers Thermaltake CT120 Reverse EX ARGB Sync 3枚セット Black PCケースファン CL-F192-PL12SW-A FN2371.

Overview

The Thermaltake CT120 Reverse EX ARGB Sync 3-Pack is a triple-pack of 120mm case fans featuring reverse-rotation blades. Unlike standard fans, the blades spin in the opposite direction, allowing the RGB lighting to face outward regardless of intake or exhaust orientation. MagForce 2.0 technology enables magnetic daisy-chaining of up to eight fans, drastically reducing cable clutter. With 65.82 CFM airflow, 1.87 mmH2O static pressure, and a noise level of 31.2 dBA, these fans strike a solid balance between performance and acoustics. The pack is an official Japan-distributor product backed by a 2-year warranty.

Compatibility Guide

These fans use standard 120mm mounting holes and fit most PC cases. Each fan has a 4-pin PWM connector for speed control and a 3-pin ARGB connector for addressable RGB lighting. Connect them to your motherboard's 4-pin PWM header and 5V ARGB header. Using the included MagForce 2.0 cables, you can daisy-chain up to eight fans to a single header pair. Be mindful of the ARGB header's current limit (typically 3A); each fan draws about 1.6W at 5V. Because the blades are reversed, double-check the airflow direction before installation to ensure proper intake/exhaust alignment.

Product Info

The Thermaltake CT120 Reverse EX ARGB Sync 3-Pack (model CL-F192-PL12SW-A, JAN 04711475644670) launched in 2024 and sits in the mid-range segment of the case fan market. It offers a compelling mix of RGB aesthetics, daisy-chain convenience, and solid cooling at a reasonable price. As of September 2026, the pack is available on Japanese online retailers for around ¥7,255. The official Japan distributor provides a 2-year warranty. Each fan consumes up to 2.28W (12V PWM) plus 1.6W (5V ARGB), keeping total system power draw low. The rated MTTF is 40,000 hours.

Best Use Cases

  • RGB-focused gaming PC builders: The reverse blade design ensures the RGB ring is always visible, whether the fan is used for intake or exhaust. MagForce 2.0 simplifies cable management, making the build look cleaner.
  • Users seeking a balance of quiet operation and cooling: With a speed range of 500–2000 RPM and a maximum noise level of 31.2 dBA, these fans are quiet enough for most builds while still moving decent air. The hydraulic bearing helps maintain low noise over time.
  • DIYers who want to reduce cable clutter: Daisy-chaining up to eight fans with a single cable run keeps the interior tidy and improves airflow. This is especially useful in cases with limited cable management space.
    If you need extreme static pressure for radiator use or absolute silence (e.g., Noctua NF-A12x25), these fans may not be the best choice. They are better suited for general case ventilation with an emphasis on RGB.

Things to Consider

The reverse blade design means airflow direction is opposite to standard fans. Plan your intake/exhaust layout carefully to avoid reduced cooling efficiency. The MagForce 2.0 cables are included, but the physical magnetic connection is built into the fan frames; the cables still need to be routed. In very large cases, the daisy-chain cable length might be tight, so pre-plan the fan layout. Compared to competitors like Cooler Master MF120 Halo or Lian Li UNI FAN SL120, the CT120 Reverse EX offers better value for RGB visibility and daisy-chain simplicity, but its static pressure is moderate. It is not ideal for high-density radiators or push-pull configurations.

FAQ

Q: What is the difference between the standard CT120 EX ARGB Sync and the Reverse version?
A: The standard version has normal rotation blades, so when used as intake, the RGB faces inward. The Reverse version spins the opposite way, making the RGB face outward on intake, keeping the lighting visible from the front. Airflow performance is identical.
Q: How many fans can be daisy-chained?
A: Up to eight fans using MagForce 2.0. Ensure your motherboard's ARGB header can supply enough current (each fan draws ~1.6W at 5V). Most headers support up to 3A, which is sufficient for eight fans.
Q: What warranty does this product carry?
A: The official Japan distributor provides a 2-year warranty. For support, contact Thermaltake Japan or the retailer where you purchased the product.

Product Disclosure (Amazon)

  • Manufacturer: Thermaltake
  • Seller: Amazon.co.jp
  • Fulfilled by: Amazon.co.jp
  • ASIN: B0D8TGRSHF
  • Note: This article covers a manufacturer-made product based on Amazon listing details.