Overview

Its defining trait is the full copper heatsink, a step up from the aluminum fins common in this size class, aimed at small-form-factor builds where vertical clearance is tight but cooling still matters.
Cooling relies on four 6mm heat pipes spreading heat across the copper base and fins. Because the fan blows downward, airflow also reaches the power delivery area and memory around the socket rather than being pushed straight out the back.
Positioning-wise, this is a mid-tier cooling part for Mini-ITX cases, slim HTPCs, and other enclosures that cannot fit a tower cooler. It makes sense as an upgrade from a stock cooler in a compact chassis, not as a flagship cooling solution.

Compatibility Guide

Socket support is listed as Intel 115X/1200 and AMD AM4. LGA1700 and AM5 are not stated in the product information, so check your motherboard socket before buying rather than assuming forward compatibility. On an AM5 platform in particular, confirm mounting support first.
Mounting uses a backplate and fastener design that tightens from behind the motherboard. That is straightforward in cases with a cutout behind the socket, or when the board is out of the chassis. In cases without rear access, plan on removing the motherboard for installation.
Because the heatsink spreads sideways in a top-flow layout, tall memory modules with heat spreaders may interfere.

Product Info

Check the retailer's page for the latest price. Physical dimensions are 94 mm long by 95 mm wide by 47 mm tall, and the unit weighs 699 g, giving it the dense feel typical of copper construction.
In the market, this lands in the mid-range of low-profile coolers. It is not a budget aluminum replacement for a stock cooler but a copper, four-heat-pipe design with headroom for quieter operation and tighter builds. Release date and warranty terms are not covered in the available information, so they are omitted here.

Best Use Cases

  • Living-room HTPC and secondary PC builders: downward airflow reaches surrounding components and pairs well with quiet-focused setups, though it is not meant for high-power flagship CPUs.

Things to Consider

Socket support is the first thing to verify. Only Intel 115X/1200 and AMD AM4 are listed, with no mention of LGA1700 or AM5, so confirm mounting before committing if you run a newer platform.
Interference is the second concern. A top-flow heatsink spreads horizontally, so tall memory and large board-level heatsinks can collide. Checking memory height and motherboard layout ahead of time avoids surprises during assembly.
For sustained heavy loads on a power-hungry CPU, a tower air cooler or a large AIO is the better fit; for compact, quiet builds this cooler is a sensible choice.

FAQ

Q: Will it work on an LGA1700 or AM5 motherboard?
A: The available information lists only Intel 115X/1200 and AMD AM4. If you need LGA1700 or AM5 support, choose a cooler that explicitly states it.
Q: Does it conflict with tall memory?
Check memory height and motherboard layout before installation.
Q: Is it enough compared with a large air cooler?
For high-load, high-power CPUs a tower or liquid cooler suits better; for compact and quiet builds this model fits well.

Product Disclosure (Amazon)

  • Manufacturer: Thermalright
  • Model: AXP-90 X47 FULL Cooper
  • ASIN: B09CGXBL8L
  • Note: This article covers a manufacturer-made product based on Amazon listing details.