Overview

ID-COOLING builds its reputation on compact cooling hardware, and the IS-40-XT Black sits at the very low end of that lineup in terms of height. The whole assembly stands just 47mm tall, which makes it a natural candidate for Mini-ITX cases and HTPC chassis where vertical clearance is the first thing that gets taken away from you. Four heat pipes run directly against the CPU heat spreader in a direct-contact layout, so heat moves out of the chip without an intermediate base plate.
Check the retailer's page for the latest user reviews. That is a respectable figure for a fan this small, and the PWM control means the blade speed tracks the load rather than sitting at one fixed level. In a small enclosure, that behavior matters more than raw peak airflow.
The finish is black from fan frame to fin stack, which keeps it visually quiet inside a dark-themed mini build. Socket support covers Intel LGA1700/1200/1151/1150/1155/1156 and AMD AM5/AM4, and the mounting kit includes a backplate. For anyone assembling a space-constrained system, this is a cooler that asks you to think about height and memory clearance before anything else.

Compatibility Guide

On the Intel side the IS-40-XT Black lists LGA1700, LGA1200, LGA1151, LGA1150, LGA1155 and LGA1156. AMD coverage runs to AM5 and AM4. That spread covers most mainstream builds from the past several generations, so the socket question is usually answered before you start worrying about anything else.
Installation uses a backplate, which means you want access to the rear of the motherboard. In a case with a cutout behind the socket, the job is straightforward; in a chassis without one, you may need to pull the board.
The 47mm height is the number that decides whether this cooler fits at all. Low-profile cases often leave only a few dozen millimeters above the CPU, so check your chassis specification for its CPU cooler height limit before ordering. Memory clearance is helped by the compact footprint, which is described as leaving room even on Mini-ITX boards, but tall heat-spreader modules packed tightly next to the socket still deserve a visual check against your specific board layout. Mini-ITX is the form factor this cooler is aimed at.

Product Info

Pricing sits in the low thousands of yen, placing this firmly in the entry tier of CPU coolers. Given the 47mm height, four heat pipes and 92mm PWM fan, it reads as a sensible first cooling purchase for a small-form-factor build rather than a performance statement. There is no RGB lighting and no radiator; the design trades those for a low profile.
Its market position is clearly separate from large tower air coolers and AIO liquid units. This is not a model that competes on thermal headroom, but one that competes on fitting into a tight space. Rated TDP, warranty terms and bundled accessories are not stated in the available product information, so they are not covered here.

Best Use Cases

  • Living-room HTPC and compact media PC builders: the 47mm height is what lets the side panel close on a slim chassis, while anyone with a mid-tower and room to spare should look at a larger cooler instead.
  • First-time Mini-ITX builders working inside a strict height limit: the backplate mounting kit keeps the install procedure readable and the price stays low, though it is the wrong pick for a high-heat CPU.
  • Builders going for an all-black, quiet-leaning small system: the black finish and PWM speed control make it easy to live with visually and acoustically, but it is not the choice when cooling capacity is the priority.

Things to Consider

Check the case's CPU cooler height limit first. 47mm is low, but very slim chassis can still fall short by a few millimeters, and discovering that after assembly is painful.
Cooling capacity is the other honest limitation. Four heat pipes and a 92mm fan prioritize space over thermal headroom, so a high-end CPU under sustained full load is not the target workload. If quiet cooling of a power-hungry chip is the goal, a taller air cooler or a liquid cooler makes more sense. Conversely, with a lower-power CPU and everyday tasks, this cooler avoids being overkill and keeps the budget intact.
Memory interference is reduced by the compact design, yet tall heat-spreader modules in a dense layout still warrant a check. Because the fan spans a wide RPM range, adjusting the fan curve in the motherboard firmware is worthwhile if you want to keep ramp-up noise in check.

FAQ

Q: Will it mount directly on an LGA1700 CPU?
A: LGA1700 is on the supported socket list and the kit includes a backplate. Whether you can reach the back of the motherboard depends on your case, so confirm there is a rear cutout before you start.
Q: Does it fit a case with a 50mm cooler height limit?
A: At 47mm total height it clears a simple height comparison.

Product Disclosure (Amazon)

  • Manufacturer: ID-COOLING
  • Model: IS-40-XT BLACK
  • ASIN: B0CY274JWV
  • Note: This article covers a manufacturer-made product based on Amazon listing details.