Overview

The Thermalright AXP 90 X 47 FULL is a low-profile, top-flow CPU cooler from a Taiwanese brand with a long track record in cooling. Its defining number is the height: 47mm, with the whole heatsink measuring 94.5 (L) x 95 (W) x 47 (H) mm including the fan. That makes it a natural fit for small-form-factor builds and slim cases where space above the CPU is tight.
Cooling relies on four 6mm U-shaped copper heatpipes using AGHP technology, nickel-plated and paired with an aluminium fin stack. The bundled fan is a slim 92 x 92 x 15mm unit rated at 2700rpm plus or minus 10 percent, pushing up to 72 m³/h with noise listed at 22.4 dBA or below. It connects over a 4-pin PWM header, and the hydraulic bearing is chosen with long operating hours in mind.
Socket support covers Intel LGA 1150, 1151, 1155 and 1156 along with AMD AM4. A full-metal dual-platform fastener set is included to keep mounting rigid. This is not a flagship cooler chasing benchmark crowns; it is a practical answer for compact builds that cannot swallow a tower heatsink.

Compatibility Guide

The supported platforms are Intel LGA 1150, 1151, 1155 and 1156, plus AMD AM4. Because the product name lists the 115x family specifically, check your mounting hardware before buying if you run a different Intel socket. Newer platforms such as AM5 and LGA 1700 are not part of the stated support list, so plan accordingly.
The 47mm height is the headline for clearance-limited mini-ITX cases. A top-flow layout also pushes air across the VRM and memory area around the socket, which helps neighbouring components. Memory clearance deserves attention: tall heatspreaders can conflict with the overhanging fin stack, so measure before assembly.
The fan uses a standard 4-pin PWM header and plugs directly into the board's CPU fan connector. Speed control is handed to the motherboard fan curve, so set a profile in BIOS if you want quieter low-load operation.

Product Info

Pricing sits toward the entry end of the CPU cooler market, which suits budget-conscious small builds. The heatsink measures 94.5 (L) x 95 (W) x 47 (H) mm with the fan installed, the fan itself is 92 x 92 x 15mm at 2700rpm plus or minus 10 percent, airflow reaches 72 m³/h, noise is 22.4 dBA or below, and the connection is 4-pin. Four 6mm AGHP heatpipes handle heat transfer.
In market terms this is a clearance-first solution rather than a replacement for large tower air coolers. It earns its place by fitting where bigger hardware cannot go, not by winning thermal charts.

Best Use Cases

  • Builders planning a mini-ITX system with a strict height limit: the 47mm profile and top-flow layout fit cramped chassis and still move air over nearby parts, while anyone with room for a tower cooler should skip it.
  • Owners keeping an older LGA 1151 or AM4 machine alive on a tight budget: the socket list is explicit and the all-metal fasteners hold firmly, but it is the wrong pick for a brand-new platform build.
  • Quiet secondary rigs and home servers: the hydraulic bearing fan and modest noise rating suit long runtimes, though power-hungry CPUs pushed hard will want more cooling.

Things to Consider

Socket matching is the first thing to verify. Support is stated for LGA 1150, 1151, 1155, 1156 and AM4, with no mention of LGA 1200, AM5 or LGA 1700, so confirm your board before ordering.
By design, a low-profile top-flow cooler gives up headroom to large towers. If you run a high-power CPU under sustained load, moving to a roomier case and a bigger cooler will be quieter and more stable in the long run.
Memory interference is the other practical caveat. The fin stack overhangs toward the DIMM slots, so tall memory heatspreaders can clash. Measure case clearance and memory height before you commit to the build.

FAQ

Q: Will it fit an LGA 1200 motherboard?
A: The stated support list covers LGA 1150, 1151, 1155, 1156 and AM4. LGA 1200 is not listed, so verify the mounting specification rather than assuming compatibility.
Q: Is it enough compared with a large tower air cooler?
A: No, and it is not meant to be. At 47mm tall it trades thermal headroom for clearance, which is exactly the point in a cramped case.
Q: How loud is the fan?
A: The rated noise is 22.4 dBA or below at 2700rpm plus or minus 10 percent. PWM control lets you lower the speed, and the final result depends on your motherboard fan curve.

Product Disclosure (Amazon)

  • Manufacturer: Thermalright
  • Model: AXP90 X47 FULL-ri
  • ASIN: B09PHGG6BN
  • Note: This article covers a manufacturer-made product based on Amazon listing details.