This article covers 【10Gbps】 ORICO M.2 NVMe SSDケース M-Key.

Overview

ORICO's TCM2-RD is a compact M.2 NVMe SSD enclosure that turns your internal NVMe drive into a high-speed external storage device via USB-C. It supports USB 3.2 Gen2 with a theoretical transfer rate of 10Gbps, and includes UASP and TRIM support to maintain SSD performance over time. The enclosure accommodates 2230, 2242, 2260, and 2280 form factors, making it compatible with most NVMe M.2 SSDs on the market. Priced around $17–20, it offers excellent value for anyone looking to repurpose an old NVMe drive or build a portable fast storage solution.
The translucent cover reveals the internal aluminum heat sink plate, adding a subtle industrial aesthetic. Four color options (black, white, blue, red) let you match your setup. Measuring just 108×34×11.5mm, it's pocket-friendly and easy to carry. Installation is tool-free and it supports hot-swap, so you can swap drives on the fly without rebooting.

Compatibility Guide

  • SSD Interface: M.2 M-Key / B&M Key (NVMe only). Does NOT support SATA M.2 SSDs (B-Key or B+M Key SATA).
  • Form Factors Supported: 2230 (22×30mm), 2242 (22×42mm), 2260 (22×60mm), 2280 (22×80mm). All must be NVMe protocol.
  • Maximum Capacity: Up to 4TB per drive.
  • OS Support: Windows 7/8/10/11, macOS, Linux. Also works with Android/iOS devices that support USB OTG.
  • Connector: USB Type-C female port. Includes dual cables: USB-C to C and USB-C to A for broad compatibility.

Product Info

The ORICO TCM2-RD sits in the entry-to-mid range of NVMe SSD enclosures. It has been on the market for a few years, but its 10Gbps USB interface and wide form-factor compatibility keep it relevant. Pricing is well under ¥3,000, making it one of the most affordable options available. Warranty follows ORICO's standard policy. Market positioning: a budget-friendly, reliable NVMe enclosure that prioritizes cost-effectiveness over bleeding-edge speed or premium build materials.

Best Use Cases

  • Repurposing spare NVMe SSDs: If you've upgraded your PC's internal storage and have a leftover NVMe drive, this enclosure gives it a second life as a fast external drive. Great for backups or as a portable work drive.
  • Creative professionals on the go: Photographers and videographers can store large project files and edit directly from the enclosure. 10Gbps speeds handle 4K video proxies and RAW photo catalogs reasonably well, though you'll want a faster enclosure for heavy 8K workflows.
  • Casual gamers: Use it as external game storage for laptops or consoles. While not as fast as internal NVMe, it delivers better load times than a traditional external HDD. Not recommended for competitive gaming where every millisecond counts.

Things to Consider

This enclosure is strictly for NVMe M.2 SSDs; do not attempt to install a SATA M.2 drive. The actual transfer speed depends on both the SSD's capabilities and your host device's USB controller. To reach the full 10Gbps, both the enclosure and the host port must support USB 3.2 Gen2 (or USB 3.1 Gen2). Using a USB 3.0 / 3.1 Gen1 (5Gbps) port will cap performance at roughly half. Additionally, sustained heavy writes can generate heat; while the internal aluminum plate and thermal pad help dissipate it, users planning long continuous transfers should monitor temperatures. For less than $20, you get solid performance, but if you need 20Gbps or Thunderbolt speeds, consider a higher-end model.

FAQ

Q: Can I use a B&M Key (NVMe) SSD with this enclosure?
A: Yes, B&M Key NVMe SSDs (which have both M and B notches) are supported. However, B-Key-only SSDs or SATA-based B&M Key drives are not compatible. Always check your SSD's keying before purchasing.
Q: Does it work with PS5 or Xbox Series X?
A: It will be recognized as USB external storage on PS5 and Xbox Series X/S, allowing you to store and play backward-compatible games. PS5 native games can be stored but not played directly from the enclosure. Check the console's external storage compatibility guide for details.
Q: Can I connect it to my smartphone?
A: If your Android phone supports USB OTG, you can access the drive via a file manager app. Power draw and file system support vary by device, so full compatibility is not guaranteed across all models.

Product Disclosure (Amazon)

  • Manufacturer: ORICO
  • Seller: ORICO専門店
  • Fulfilled by: Amazon
  • ASIN: B07QQP9SDS
  • Note: This article covers a manufacturer-made product based on Amazon listing details.