Overview

This review of the LANCOOL 207 — Compact ATX Mid-Tower Case with 4 Pre-Installed Fans focuses on the clearance numbers and the points where real builds tend to go wrong. The short verdict: the Lian Li LANCOOL 207 suits builders who want ATX support in a shorter case and who want a well-cooled air build without buying extra fans.

It is a weaker fit if you plan to reuse a long power supply or want a case that is effortless to cable.

The LANCOOL 207 mounts the power supply at the front of the case. That layout keeps the chassis short while still fitting ATX motherboards, graphics cards up to 375mm and a 360mm radiator on top.

Four fans come pre-installed: two 140mm ARGB fans at the front (30mm thick) and two 120mm PWM fans on the PSU shroud (25mm thick). The side panel is tempered glass and the finish is black.

On Amazon.co.Check the retailer's page for the latest user reviews.

Few cases around the 10,000-yen mark ship with four fans, and that out-of-the-box cooling is likely a big part of the rating.

Key Clearances at a Glance

Item LANCOOL 207
Motherboard ATX / Micro ATX / Mini-ITX
GPU length Up to 375mm
CPU cooler height Up to 172mm
PSU length Up to 160mm (front mount)
Radiator Top, up to 360mm (240/280mm supported)
Storage 2x 2.5-inch, 1x 3.5-inch
Expansion slots 7
Included fans 2x 140mm ARGB front (30mm), 2x 120mm PWM on shroud (25mm)

The row that matters most is not GPU length or cooler height but the 160mm PSU limit. The 375mm GPU and 172mm cooler figures leave room for most current parts.

The PSU limit, however, can be exceeded by high-wattage or older units. Whether the LANCOOL 207 works for you largely comes down to this one number.

Compatibility Guide

Motherboard

The case supports ATX, Micro ATX and Mini-ITX. The 244mm width in the Japanese product name is the standard ATX width, so wider boards such as E-ATX should be treated as unsupported.

Smaller boards work, but the case makes the most sense for ATX builds; with Micro ATX or Mini-ITX, a smaller case may be worth comparing.

CPU Cooler

Cooler clearance is 172mm. Many large dual-tower air coolers sit in the 160mm range, and the 165mm Noctua NH-D15 fits on paper.

Treat 172mm as a hard ceiling with the glass panel closed, and leave a few millimetres of margin.

Graphics Card

GPUs up to 375mm fit, and most high-end cards fall well within that. The dimensions to watch are thickness and width: very thick or wide cards need room for the power cable bend and space from the glass.

The included anti-sag bracket handles the weight of long cards.

Power Supply (the Critical Part)

The PSU goes at the front, with a 160mm depth limit. Many ATX units are around 140-160mm deep, but some high-wattage models exceed 160mm.

A unit right at the limit may physically fit yet leave no room for cable bends. A PSU around 140mm deep makes the build much easier.

Cable length is the other trap. Because the PSU sits at the front, the CPU EPS cable has a long way to travel to the top of the motherboard.

If you are reusing a PSU, confirm its cables are long enough before you buy.

Radiators

The top supports up to 360mm, plus 240mm and 280mm. A top radiator with fans can collide with tall RAM, especially heatspreader-heavy RGB kits, or with VRM heatsinks.

Check the combined radiator and fan thickness against your memory height. The listing only mentions the top as a radiator location.

Storage

You get two 2.5-inch mounts and one 3.5-inch bay. That suits an M.2-first build with at most one data HDD, not a storage-heavy system.

Product Info

The LANCOOL 207 launched in 2024. As of June 5, 2026, Amazon.co.jp listed it at 10,800 yen.Check the retailer's page for the latest price.

Prices move with sales and stock, so check the current listing before buying.

The chassis uses steel and tempered glass. The listed weight is 9.25kg, but the listing does not say whether that includes packaging, so check the product page if weight matters.

Seven expansion slots cover a typical ATX build.

The two front 140mm fans are ARGB. ARGB devices generally use the motherboard's 5V 3-pin header and are not compatible with 12V 4-pin RGB headers; plugging into the wrong one can damage the fans, so confirm the connection in the manual.

The two 120mm shroud fans are PWM and can follow load when connected to a fan header. Check how many headers you need for all four fans and whether a splitter or hub is included.

Cable-management straps and a GPU anti-sag bracket are also included. Because you do not need to buy extra fans or a GPU support, the total build cost gap versus cheaper, fan-less cases narrows.

Cooling Layout and What to Add

The front 140mm pair pulls air in, and the two shroud fans push air up toward the GPU. In an air-cooled gaming PC the GPU is usually the hottest part, so feeding it fresh air directly is a sensible layout.

The listed stock fans do not include a rear or top exhaust fan. Heat can still escape through the mesh, but warm air tends to pool behind the CPU cooler.

With a hot CPU or in summer, adding one or two exhaust fans at the rear or top is an effective upgrade (check the product page for available mounting positions).

Alternatives

The Fractal Design Pop Air and NZXT H5 Flow are common comparisons at this price. The Pop Air is also airflow-focused with three included fans, but the LANCOOL 207 ships with more fans and thicker front intakes.

The H5 Flow has a cleaner look, while the LANCOOL 207 is more flexible on GPU length and radiator support.

Where the LANCOOL 207 loses is the front PSU layout. Conventional bottom-mount cases rarely care about PSU length.

If you are buying a new PSU anyway this barely matters, but if you want to reuse a long unit it is a real difference.

Best Use Cases

  • Air-cooled gaming builds without extra fan purchases. Two 140mm front fans plus two 120mm fans under the GPU give mid-range and high-end cards a solid cooling base from day one.
  • ATX builders short on depth. The front PSU layout shortens the case, which helps on small desks or in tight spaces.
  • Anyone buying a new PSU. Pick a unit at or under 160mm, ideally around 140mm, and the front-mount drawback mostly disappears.
  • First-time builders. The anti-sag bracket and cable straps remove two common headaches. Plan the power cabling before you start, since it differs from typical cases.

Who Should Skip It

  • Anyone reusing a PSU deeper than 160mm
  • Builders needing two or more 3.5-inch drives
  • Anyone wanting a front-mounted radiator (the listing only mentions the top)
  • Builders who put silence first (a mesh case with many fans is not as quiet as a sound-dampened one)

Things to Consider

1. Measure your PSU. The limit is 160mm, and longer units risk interfering with the front fans and wiring.

A unit right at the limit leaves little room for cable bends, so about 140mm is the safe choice. A modular PSU makes routing in tight space easier.

2. Check cable length. The CPU EPS connector is far from a front-mounted PSU. If you are reusing a PSU, make sure the cable reaches.

3. Watch RAM height with a top radiator. A 360mm radiator on top can hit tall RAM.

With tall RGB modules, consider slim fans or a smaller radiator.

4. Rear cable space is tight. The offset motherboard tray can make the cable area feel tighter than usual.

Use the included straps and route the thick cables first.

5. No exhaust fan in the box. The four stock fans are on the intake side. With a hot CPU, adding exhaust fans helps temperatures.

6. Verify color and listing data. This article covers the black model; if you want another color, check the store for variants and model numbers.

In our pricing data, the entry labeled Amazon US actually points to the same Japanese Amazon page, so no US price was captured. The 9.25kg weight may include packaging.

Store listings can contain errors, so confirm from the photos and product name that you are buying the LANCOOL 207 BLACK.

FAQ

Q. Can I fit a 360mm AIO? A.

Yes, on the top, up to 360mm (240/280mm also supported). Check the radiator and fan thickness against your RAM height.

Q. How long can the PSU be?
A. Up to 160mm deep. Around 140mm is easier to cable.

Q. Do I need to buy more fans? A.

The four included fans handle a typical gaming build. Adding exhaust fans helps with hot CPUs or summer temperatures.

Q. Does it work with Micro ATX or Mini-ITX boards?
A. Yes, though with a small board a smaller case may be a better use of space.

Q. How many 3.5-inch drives fit?
A. One, plus two 2.5-inch drives. It is not meant for storage-heavy builds.

Product Disclosure (Amazon)

  • Manufacturer: リアンリー(Li LIAN LI)
  • Seller: Amazon.co.jp
  • Fulfilled by: Amazon.co.jp
  • ASIN: B0DJDM7V1R
  • Note: This article covers a manufacturer-made product based on Amazon listing details.