Overview

The IODATA GigaCrysta S EX-GDU271JLAQD — 27-Inch Mini LED Quantum Dot Gaming Monitor with 4K/180Hz and FHD/360Hz Dual Mode (model EX-GDU271JLAQD, black) is listed on the official manufacturer page as a TFT 27-inch wide panel (Mini LED / Quantum dot) with an IPS (HFS) display method. The maximum display resolution is 3840×2160, and the spec sheet lists two modes: Dual Mode UHD 180Hz and Dual Mode FHD 360Hz.

The Japanese title says FHD, but the official maximum resolution is 3840×2160.

For picture-related figures, the official page gives maximum brightness as 450cd/㎡ in SDR and 1400cd/㎡ peak in HDR. HDR support is HDR10 input and DisplayHDR 1400.

The panel surface is non-glossy.

Compatibility Guide

The official page lists Windows PCs, Mac and Chromebook as supported computers. For OS, it says the monitor does not depend on the OS (excluding OSes the unit does not support), provided the resolution and frequency fall within the supported-signal table.

Supported consoles on the official page are PS5 Pro, PS5, PS4 Pro, PS4, Nintendo Switch 2, Nintendo Switch, Xbox Series X and Xbox Series S. The official note says PS4 and Nintendo Switch work on the HDMI2 port only.

Maximum refresh rates at maximum resolution differ by input, according to the official spec sheet.

Input UHD (3840×2160) FHD
HDMI1 180Hz 360Hz
HDMI2 120Hz 240Hz
DisplayPort 180Hz 360Hz

The HDMI2 limits match its separate scan-frequency entries on the official page (vertical 48 to 240Hz in FHD, 48 to 120Hz in UHD). To use 4K at 180Hz, connect to HDMI1 or DisplayPort.

For variable refresh rate, the official page lists NVIDIA G-SYNC Compatible and VESA AdaptiveSync over DisplayPort, and HDMI 2.1 VRR over HDMI.

Video inputs are two HDMI (HDCP 2.3) and one DisplayPort (HDCP 2.3).

The USB-A port is for power supply (5V/1A) and maintenance, not for video input. The official page says the [USB 1A FW UPDATE] port can bus-power certain devices without their own AC adapter: Microsoft Wireless Display Adapter, Microsoft 4K Wireless Display Adapter, Fire TV Stick (3rd gen), Fire TV Stick 4K (1st gen) and Fire TV Stick 4K Max (1st gen).

It adds that a low-power warning may appear or some apps may not work, in which case the device's own AC adapter should be used.

Product Info

rmation

Everything below comes from the official manufacturer page.

Item Detail
Model / color EX-GDU271JLAQD / Black
Panel TFT 27-inch wide (Mini LED / Quantum dot), IPS (HFS), non-glossy
Max resolution 3840×2160
Pixel pitch 0.1554 (H) × 0.1554 (V) mm
Display area 596.736 (H) × 335.664 (V) mm
Max colors 1.07 billion (10bit input)
Viewing angle 178° vertical, 178° horizontal
Brightness SDR 450cd/㎡; HDR peak 1400cd/㎡
Contrast 1000:1 (up to 2,700,000:1 with local dimming level 3 and HDR on)
Response time 0.5ms GTG (Dual Mode FHD 360Hz, overdrive level 3, Clear AIM2 level 3)
Speakers 5W + 5W stereo
Headphone jack 3.5mm stereo mini

The 0.5ms figure carries the official conditions above.

The official page does not state that the same value applies in Dual Mode UHD 180Hz.

Features listed on the official page are Focus Mode, Dual Frame Rate (DFR), local dimming, color gamut conversion (Native, AdobeRGB, DCI-P3, sRGB modes), Clear AIM2, blue light reduction and flicker-less design. The official note says the flicker-less design is disabled while Clear AIM2 is on.

Power figures: rated AC100V 50/60Hz via AC adapter, maximum consumption 120W, 29.8W in normal operation, 0.2W on standby, and 92.7kWh annual consumption.

Footprint and Stand

With the stand, the official dimensions (W×D×H) are about 614×239×398 to 518mm; without it, about 614×66×372mm (protrusions excluded). Mass is about 7.0kg with the stand and about 4.4kg without.

Stand adjustment per the official page: tilt 20° up and 5° down, swivel 25° left and right, height adjustment 120mm, pivot 90° left and right. The VESA interface is 100mm×100mm, and the official page says the supplied free-style stand is attached to that VESA interface.

If you plan to switch to a monitor arm, start from that 100mm×100mm pattern and the roughly 4.4kg weight without the stand.

Operating conditions are 0℃ to 40℃ and 20 to 80 percent humidity without condensation; storage is -20℃ to 60℃. The official assembly estimate is about 4 minutes for one adult, from unboxing to attaching the stand.

Who It Suits

  • People who want one monitor for both consoles and a PC. The official page lists PS5 Pro, Xbox Series X and Nintendo Switch 2 among supported consoles, with two HDMI inputs and one DisplayPort.
  • People who also do color-sensitive work, since the official page lists gamut conversion (Native, AdobeRGB, DCI-P3, sRGB modes).

Before You Buy

  • Maximum 4K refresh needs HDMI1 or DisplayPort; HDMI2 tops out at 120Hz in UHD.
  • PS4 and Nintendo Switch work on the HDMI2 port only.
  • The unit weighs about 7.0kg with the stand and about 4.4kg without it, so check your desk and arm limits.
  • The warranty is 3 years including panel and backlight, limited to a maximum of 16 hours of lit-screen use per day. The bright-pixel guarantee applies only within 1 month of purchase.
  • Official accessories: power cord (PSE-compliant), HDMI cable, DisplayPort cable, AC adapter, stand neck, stand base, remote control, 2 alkaline test batteries, and the must-read sheet.
  • Check the sales page for price and stock.

FAQ

Q. Can I get the top refresh rate at 4K?

The official page lists UHD/180Hz on HDMI1 and DisplayPort and UHD/120Hz on HDMI2.

Q. Does it work with NVIDIA G-SYNC?

The official page lists NVIDIA G-SYNC Compatible over DisplayPort, and HDMI 2.1 VRR over HDMI.

Q. Is a remote included?

Yes. The official accessory list includes a remote control and 2 alkaline test batteries.