Overview

The ID-COOLING IS-77-XT Black is a low-profile CPU cooler built around a 77mm height. It uses six heatpipes and is rated for up to 150W of cooling capacity, which puts it in the small-form-factor and Mini-ITX segment where vertical space is the scarcest resource. A 120mm slim fan handles airflow despite the low stack height.
Socket support covers Intel LGA1851, LGA1700, LGA1200 and LGA115X, plus AMD AM5 and AM4. That spread means the cooler can follow a builder across current and previous mainstream platforms rather than being tied to one generation. Low-profile coolers usually force a tradeoff between height and thermal headroom, and this model leans on heatpipe count and fan diameter to close that gap.
It suits anyone assembling a compact case that cannot fit a tower cooler but who still wants more than a stock cooler provides. If your case has plenty of vertical clearance, a larger tower cooler will simply offer more thermal margin.

Compatibility Guide

On the Intel side the IS-77-XT Black lists LGA1851, LGA1700, LGA1200 and LGA115X, covering the recent mainstream generations. AMD support spans AM5 and AM4, so both current and older Ryzen builds are addressed. Check the socket list against your board before ordering.
The form factor is low-profile with a 77mm height. Many Mini-ITX cases impose strict cooler height limits, so whether this fits is decided by the case specification rather than the cooler alone. Confirm the case's cooler clearance first.
Cooling is handled by a 120mm slim fan, which is a relatively large diameter for a low-profile design. If your memory modules carry tall heatspreaders, verify clearance with your specific motherboard and DIMM combination, since low-profile coolers sit close to the board.

Product Info

The price sits in the affordable end of the low-profile cooler market, which makes it a reasonable pick when the budget for a small build is tight. The 150W rating frames it for mid-range CPUs inside compact cases rather than for sustained high-load work on flagship chips.
Positioning is entry-to-mid tier. Within the 77mm height constraint, six heatpipes and a 120mm slim fan represent a cooling-first layout for small cases. It is not the strongest cooler you can buy, but it is a sensible balance of space and thermal performance for SFF builds.

Best Use Cases

  • Builders planning a Mini-ITX system: the 77mm height fits many compact cases and gives more headroom than a stock cooler, though cases with limits below 77mm will not accept it.
  • People building a quiet, space-saving living-room or study PC: the low profile leaves room for cable routing and airflow, while those with a full tower and no height limit gain nothing from the smaller size.
  • Budget-focused SFF builders: the cooler keeps cost down so money can go to other parts, but it is not the right choice for pushing a high-end CPU under sustained load.

Things to Consider

Start with the case's CPU cooler height limit. At 77mm the cooler is typical for low-profile designs, but ultra-slim cases may still reject it, so match the case spec before buying.
The 150W figure is the manufacturer's rated envelope. A high-TDP flagship CPU running long full-load sessions may push temperatures higher than a mid-range chip would. Planning around a mainstream CPU is the realistic approach.
If your mid-tower case has vertical room to spare, there is little reason to pick this over a larger tower cooler, which will generally offer more thermal margin and quieter operation. The low-profile format only pays off when height is genuinely constrained.

FAQ

Q: Can it be mounted on an LGA1851 CPU?
A: LGA1851 is on the supported socket list, so it can be installed within that stated range. Follow the mounting instructions included with the cooler for the actual installation steps.
Q: What case clearance does the 77mm height require?
A: The case needs a CPU cooler height limit of at least 77mm. If you are right at the limit, leave margin for board-side components and the side panel.
Q: How does it compare with a stock cooler?
Against a large tower cooler, however, its thermal headroom is smaller.

Product Disclosure (Amazon)

  • Manufacturer: ID-COOLING
  • Model: IS-77-XT BLACK
  • ASIN: B0FZG562NX
  • Note: This article covers a manufacturer-made product based on Amazon listing details.