This article covers Fractal Design Terra Graphite FD-C-TER1N-01 mini-ITXケース CS8273.

Overview

The Fractal Design Terra Graphite (model FD-C-TER1N-01) is a Mini-ITX case with a volume of approximately 10.4 liters. Its exterior combines aluminum with walnut wood, giving it a refined look that blends into a living space rather than screaming "gaming PC." The chassis measures 343 x 153 x 218 mm, keeping the width and height compact while allowing enough depth for serious hardware.
The defining feature is an adjustable central frame that lets you shift space between the CPU cooler and graphics card. It accommodates CPU coolers from 48 to 77 mm in height and GPUs from 43 to 72 mm in thickness, so you can tune the interior to match your components. Graphics cards up to 322 mm in length are supported, and the case is designed around SFX or SFX-L power supplies with a maximum length of 130 mm.
On the front panel, you get a USB Type-C port running at 20 Gbps and a USB Type-A port at 5 Gbps. Up to two 2.5-inch drives can be mounted inside. This is a mid-to-high-tier product aimed at builders who want a compact system without sacrificing GPU compatibility.

Compatibility Guide

This case supports Mini-ITX motherboards only. Micro-ATX and ATX boards will not physically fit, so check your motherboard's form factor before planning a build.
Power supply selection is limited to SFX or SFX-L units with a maximum length of 130 mm. Standard ATX power supplies are too large for this chassis. When choosing an SFX unit, pay attention to cable length and wattage to ensure a clean installation.
Graphics cards up to 322 mm in length are supported, but the adjustable frame affects the thickness limit. GPU thickness can range from 43 to 72 mm depending on where you position the frame. If you plan to use a 120 mm radiator, the GPU length is restricted to 200 mm, so water-cooling builds require careful component selection.
CPU coolers must be between 48 and 77 mm in height. Sliding the frame toward the GPU side gives you more room for a taller cooler, but that reduces the maximum GPU thickness. Conversely, a thick graphics card forces you into a low-profile CPU cooler.
Storage is limited to two 2.5-inch drives. There is no support for 3.5-inch HDDs, so if you need large-capacity storage, consider external drives or a NAS instead.

Product Info

The Fractal Design Terra Graphite FD-C-TER1N-01 launched in June 2023. It stands out in the Mini-ITX market with its aluminum and walnut exterior, offering a premium aesthetic that is rare among PC cases.
Positioned in the mid-to-high tier, this case supports GPUs up to 322 mm and features an adjustable frame for flexible layout optimization. These capabilities go beyond what most compact cases offer, making it a compelling choice for builders who want small size without compromising on graphics performance.
The front I/O includes USB Type-C at 20 Gbps and USB Type-A at 5 Gbps, providing fast connectivity for modern peripherals. The case weighs approximately 3.1 kg, making it manageable for desk placement or occasional transport.

Best Use Cases

  • Desk-space-conscious PC builders who want a clean setup. The roughly 10.4-liter chassis saves significant space while still accepting full-size graphics cards. If you prefer the expansiveness of a large tower, this will feel cramped.
  • Creators and designers who care about aesthetics. The aluminum and walnut finish offers a warmth you will not find in typical black-box cases. If RGB-heavy styling is your preference, look elsewhere.
  • Enthusiasts who enjoy fine-tuning their builds. The adjustable frame lets you balance CPU cooler height against GPU thickness to optimize your configuration. First-time builders may find the assembly process challenging.

Things to Consider

This case is exclusively for Mini-ITX motherboards; Micro-ATX and ATX boards cannot be installed. You will also need to purchase an SFX or SFX-L power supply (max 130 mm length) since ATX units are not compatible.
The adjustable frame has a limited range: CPU coolers from 48 to 77 mm and GPUs from 43 to 72 mm thick. You cannot pair a tall air cooler with a thick graphics card simultaneously, so component selection requires careful planning.
Using a 120 mm radiator restricts GPU length to 200 mm. If you are considering a water-cooling setup, verify your GPU's dimensions beforehand. Also, the case only supports 2.5-inch drives, so 3.5-inch HDDs are out of the question unless you go external.

FAQ

Q: Can I install an ATX power supply in this case?
A: No. The Terra is designed exclusively for SFX or SFX-L power supplies with a maximum length of 130 mm. ATX units will not fit, so plan to buy an SFX unit for your build.
Q: Will a large graphics card fit?
A: GPUs up to 322 mm in length are supported. However, the adjustable frame changes the thickness limit (43 to 72 mm), so you need to balance GPU thickness against CPU cooler height.

Product Disclosure (Amazon)

  • Manufacturer: Fractal(フラクタル)
  • Model: FD-C-TER1N-01
  • ASIN: B0C6NX9YXR
  • Note: This article covers a manufacturer-made product based on Amazon listing details.