Overview

The Geometric Future Model 5 Black, model number GF-M5-BK, is a mid-tower chassis built around a pillarless tempered glass design. Glass covers both the front and the right side, so the interior stays visible with fewer visible frame lines between panels. It is aimed at builders who want the finished machine to be part of the room rather than hidden under a desk.
Motherboard support runs from E-ATX down through ATX, Micro-ATX and ITX, which leaves room for large boards with plenty of expansion slots. Cooling is equally flexible: the case accepts up to ten 120mm fans and can host a 420mm radiator, so both air-heavy and water-cooled builds have a path forward.
Inside, a display platform gives you a spot to place small figures or decorative items, turning the case into a showcase as much as an enclosure. Given the price band, the Model 5 Black sits in the mid-range, trading flashy extras for glass-forward looks and cooling headroom.

Compatibility Guide

Motherboard fit covers E-ATX, ATX, Micro-ATX and ITX. The case is designed around an ATX power supply, and PSU depth should stay within 160mm. A fully modular unit is recommended, which makes sense given how much cable routing room a glass-sided build needs.
For cooling, you can install up to ten 120mm fans and mount a radiator as large as 420mm. That gives you room to plan a front or side radiator setup without immediately running out of space. If you prefer air cooling, filling the fan mounts with 120mm units is the straightforward route.
Because tempered glass sits on both the front and the right side, placement matters. Leave clearance at the front and to the right so the panels stay visible and airflow is not choked. Pushing the case tight against a wall on the glass side defeats the point of the design.

Product Info

The Model 5 Black launched on September 12, 2024, under model number GF-M5-BK. Its dimensions are roughly 480 mm long, 241 mm wide and 439 mm tall, a mid-tower footprint that still accommodates E-ATX boards without ballooning into a full-tower chassis.
In the market, this is a mid-range case. It pairs E-ATX support, 420mm radiator compatibility and up to ten 120mm fan mounts with a price that stays approachable. Rather than piling on features, Geometric Future leans on the glass-heavy look and cooling flexibility as the reasons to pick it.

Best Use Cases

  • Builders who want their PC on display in a living room or on a desk: the front and right-side tempered glass plus the pillarless frame keep the interior easy to see, and the display platform suits small figures. Not ideal if the right side has to sit flush against a wall.
  • Enthusiasts planning a large radiator or a fan-packed airflow setup: 420mm radiator support and up to ten 120mm fan mounts give the headroom that hot-running builds need. Overkill for anyone who wants a small, quiet, minimal case.
  • Users running an E-ATX board with many expansion cards: support for E-ATX, ATX, Micro-ATX and ITX makes it a viable home for a large motherboard. A poor fit for anyone prioritizing the smallest possible footprint.

Things to Consider

The 160mm power supply depth limit is easy to overlook. Some high-capacity ATX units are longer than that, so check the dimensions of your intended PSU before buying. The recommendation for a fully modular unit is also worth heeding, since cable space matters in a glass-sided chassis.
With tempered glass on two sides, placement flexibility is lower than with an all-metal case. If you cannot leave clearance at the front and right, neither the looks nor the airflow will work as intended. Cramming it into a tight space under a desk is not the use case this design targets.
The expansion headroom is generous, but that makes it oversized for compact or mini-ITX builds where space is the priority. If you have no plans to use an E-ATX board or a 420mm radiator, a smaller case may be easier to live with.

FAQ

Q: Will an E-ATX motherboard actually fit?
A: E-ATX, ATX, Micro-ATX and ITX are all listed as supported. E-ATX boards vary in size, though, so confirm your board's dimensions and the clearance inside the case before committing.
Q: Where can a 420mm radiator go?
A: The case supports radiators up to 420mm. Decide the exact mounting position and fan layout after checking how your chosen radiator interacts with the rest of the build.
Q: What kind of power supply should I choose?
A: Keep PSU depth within 160mm, and a fully modular unit is recommended. Longer high-wattage units may not fit, so verify dimensions before purchase.

Product Disclosure (Amazon)

  • Manufacturer: GEOMETRIC FUTURE
  • Brand: Geometric Future
  • Model: GF-M5-BK
  • ASIN: B0DFWJB5ZH
  • Note: This article covers a manufacturer-made product based on Amazon listing details.