This article covers Lian LIANLI E-ATX対応ミドルタワーPCケース LANCOOL 216 RW ホワイト 160mm ARGBファン2基.

Overview

The Lian Li LANCOOL 216 RW is a mid-tower PC case that prioritizes airflow performance above all else. It comes with two 160mm ARGB fans at the front and one 140mm PWM fan at the rear, delivering excellent cooling right out of the box. The white variant offers a clean, modern aesthetic that fits well in any setup. What sets this case apart is its three-sided mesh design: the front, top, and PSU shroud side are all mesh, allowing hot air to escape efficiently. It supports E-ATX (up to 280mm wide), ATX, Micro ATX, and Mini-ITX motherboards, and can accommodate even the largest NVIDIA GeForce RTX 4000 series graphics cards. Positioned in the mid-range segment, the LANCOOL 216 RW punches well above its weight class. The combination of large stock fans, generous clearance, and thoughtful cable management makes it a strong contender for both mid-range and high-end builds.

Compatibility Guide

The LANCOOL 216 RW supports E-ATX (up to 280mm wide), ATX, Micro ATX, and Mini-ITX motherboard form factors. Even with an E-ATX board, there is enough room behind the motherboard tray for tidy cable routing. Graphics card clearance is an impressive 392mm, which means even the chunkiest RTX 4090 or RTX 4080 SUPER will fit without issue. CPU cooler height is rated at 180.5mm, accommodating most high-end air coolers and AIO pump units. The power supply is mounted at the bottom and supports ATX units up to 220mm in length. Storage capacity is generous: two 3.5-inch bays and six 2.5-inch bays, for a total of up to eight drives. Note that using the 3.5-inch bays may limit graphics card length slightly, so plan your build accordingly.

Product Info

Released in late 2022, the LANCOOL 216 RW is a relatively modern case that has quickly become a favorite among enthusiasts. It sits in the mid-range price tier but offers features typically found in more expensive cases. Key dimensions: W235 x D480.5 x H523mm, weight approximately 10.5kg. The front panel is full mesh with a removable dust filter. The side panel is tempered glass, providing a clear view of your components. Cooling is handled by two 160mm ARGB fans at the front and one 140mm PWM fan at the rear. Radiator support includes up to 360mm at the front, 280mm at the top, and 140mm at the rear. This flexibility makes it easy to switch between air and liquid cooling setups.

Best Use Cases

First, this case is ideal for high-end gaming PC builders. If you plan to install a large graphics card like the RTX 4090 or RTX 4080 SUPER, the 392mm clearance is a lifesaver. The stock 160mm fans provide excellent airflow, keeping temperatures in check even during extended gaming sessions. Second, users who value quiet operation without sacrificing cooling performance will appreciate the LANCOOL 216 RW. The PWM fans can be fine-tuned to run at low speeds during idle, making the system nearly silent. Under load, the fans ramp up smoothly without producing annoying noise. On the other hand, this case is not suitable for those seeking a compact or space-saving solution. Its depth of nearly 480mm requires a decent amount of desk or floor space. If you are building a small form factor PC, look at Mini-ITX-specific cases instead. ## Alternatives
In the same price range, the Fractal Design Pop Air and Corsair 4000D Airflow are direct competitors. The Pop Air offers a more classic design and excellent dust filtration, but its stock fans are 120mm units, which move less air than the LANCOOL 216's 160mm fans. The Corsair 4000D Airflow is known for its clean aesthetics and easy cable management, but it only includes two 120mm fans out of the box. The LANCOOL 216 RW clearly wins in stock fan performance, saving you the cost of additional fans.

Things to Consider

First, if you plan to use an E-ATX motherboard, make sure its width does not exceed 280mm. Some workstation-grade E-ATX boards are wider and will not fit. Second, installing a 360mm radiator at the front may limit graphics card length. Depending on the radiator's thickness, you might need to choose a shorter GPU or mount the radiator at the top instead. Finally, the tempered glass side panel is heavy and fragile. Always handle it with care during maintenance or transport to avoid accidental breakage. ## FAQ Q: Can I install a standard ATX power supply in this case? A: Yes, the bottom-mount PSU bay supports ATX units up to 220mm long. Most standard ATX power supplies will fit without any issues. Q: Are the stock fans RGB controllable? A: The two front 160mm fans are ARGB (addressable RGB) and can be connected to your motherboard's RGB header for software-based customization of colors and effects. Q: Where can I mount a liquid cooler? A: You can install radiators up to 360mm at the front, 280mm at the top, and 140mm at the rear. If using a 360mm radiator at the front, double-check your GPU length to avoid interference.

Product Disclosure (Amazon)

  • Manufacturer: Lian Li
  • Seller: Amazon.co.jp
  • Fulfilled by: Amazon.co.jp
  • ASIN: B0BN3TTBKM
  • Note: This article covers a manufacturer-made product based on Amazon listing details.