Overview
The ARCTIC P14 Pro PST 5-Pack brings together five 140mm PWM fans under model number ACFAN00319A. Each fan spins between 400 and 2500RPM and is controlled through a 4-pin PWM connection, so speed can be tuned in fine steps rather than switched between a few fixed modes. Below 5% PWM duty the fan stops entirely, which makes the set appealing for builds that want near-silent idle behavior.
The headline claim is high static pressure. ARCTIC positions the blade design to push air through dense radiators, perforated panels and mesh front intakes where a low-pressure fan would stall. A fluid dynamic bearing is used to keep operating noise down and support long service life, and the redesigned rotor blades are tuned for efficiency at lower speeds as well as raw airflow at the top end.
Buying five at once suits anyone refreshing every fan position in a case or populating a radiator in one order. It removes the guesswork of matching batches and makes it easier to plan a consistent intake and exhaust layout from the start.
Compatibility Guide
These are 4-pin PWM fans. They belong on PWM-capable headers such as CPU_FAN, SYS_FAN or CHA_FAN, where BIOS or vendor software can drive the duty cycle. A 3-pin-only header will still power the fan, but fine-grained speed control is not something you should count on, so check the motherboard manual before ordering.
The 140mm frame requires 140mm mounting positions. A 120mm-only slot will not accept the fan without an adapter, and clearance around top or front radiators should be measured rather than assumed. Because the set includes a Y-cable splitter, several fans can share one control channel and stay synchronized, though the number you can safely gang onto a single header depends on that header's current rating.
Product Info
Check the retailer's page for the latest price. Maximum speed reaches 2500RPM, and the low end supports a full stop under light load. ARCTIC's positioning here is function over flash: no addressable lighting, just pressure-oriented blades, PWM control and a bearing designed for quiet, long-term operation. That makes it a practical pick for radiator fan swaps and airflow overhauls rather than a showpiece build.
Best Use Cases
- Builders replacing every fan in a mid-tower at once: five units cover front intake and rear exhaust in one purchase, though anyone chasing RGB lighting should look elsewhere.
- Owners of AIO coolers or thick radiators who need pressure rather than raw airflow: the high-static-pressure design pushes through restrictive fins, while extreme low-noise purists may find the top speed unnecessary.
- Quiet-focused users who want fans to stop at idle: the sub-5% PWM stop behavior helps keep light-load noise down, but people who prefer fans running constantly for maximum cooling should skip it.
Things to Consider
Case support for 140mm mounts is the first gate. If your chassis only offers 120mm positions, this set will not fit without adapters, and radiator thickness needs measuring before you commit. At the top of the range the fans do produce audible air noise, so a custom fan curve is effectively part of the setup for quiet builds. Five fans can also be more than a small-form-factor case needs, in which case a smaller pack or single units may be the better value. Compared with premium boutique fans, this set trades fancy bearings and lighting for price and pressure, which is the right trade for most budget-conscious airflow upgrades.
FAQ
Q: Will these work on a motherboard with only 3-pin headers?
A: They are designed around 4-pin PWM control. A 3-pin header may power them, but you should not expect precise PWM speed regulation, so verify your board's fan header types first.
Q: Can I use them on a radiator?
A: The high-static-pressure design suits dense radiator fins and mesh panels. Check the radiator's screw spacing and thickness for interference before mounting.
Q: Is it safe to run all five from one header?
A: The included Y-cable splitter lets you branch the signal, but each motherboard header has its own current limit. Confirm the header rating before grouping multiple fans on one channel.
Product Disclosure (Amazon)
- Manufacturer: ARCTIC
- Model: ACFAN00319A
- ASIN: B0DPX94PSL
- Note: This article covers a manufacturer-made product based on Amazon listing details.





