Overview

The AMD Wraith Spire Socket AM4 4-Pin CPU Cooler is a retail air cooler from AMD's Wraith family, distributed under part number 712-000074 REV A. It pairs an aluminum heatsink with a 3.81-inch fan and is built to sit directly on an AM4 motherboard socket without extra mounting hardware.
Its most practical trait is the pre-applied thermal paste. That removes the step of buying and spreading compound, which matters to first-time builders who want fewer places to make a mistake. The fan connects through a 4-pin header, and the cable is listed at roughly 9 inches, giving a little slack in tighter chassis.
In the market this is a standalone version of a bundled stock cooler rather than an enthusiast cooling part. It is not aimed at buyers chasing RGB lighting or thick heatpipe towers, but at anyone who needs dependable stock-level cooling at a low price. That makes it a sensible spare or a first cooler for a new build.

Compatibility Guide

Socket support is AM4 only. On AM4 boards the mounting points line up with the holes left after removing a stock cooler, so no adapter bracket is required. AM5 and Intel LGA sockets are not supported, so check the socket label on the motherboard before ordering.
Power comes from a 4-pin CPU fan header. Any board with a 4-pin CPU_FAN connector can drive it, and the roughly 9-inch cable keeps routing manageable in compact cases. The heatsink is aluminum, and because paste is already applied, a separate tube of compound is not mandatory for a first install.
A realistic pairing is an AM4 mid-range CPU where the original cooler has failed or gone missing. For high-TDP chips under sustained load, the smaller fin area and lack of heatpipes mean a larger tower cooler is the safer choice.

Product Info

The model is 712-000074 REV A from AMD, with dimensions listed as 97 mm long, 97 mm wide and 97 mm tall. It is sold mainly through online retail channels, including cross-border listings, at an entry-level price in the low thousands of yen.
Its market position is clearly entry tier. The value is in getting a stock-equivalent cooler as a separate purchase, not in pushing cooling performance. It gives up ground on noise and thermal headroom to premium coolers, but wins on price and simple installation.

Best Use Cases

  • First-time AM4 builders who want fewer assembly steps: the pre-applied paste and direct socket fit help, though anyone chasing quiet operation should look at a larger cooler instead.
  • Owners reviving an AM4 system whose stock cooler failed or went missing: the direct mount keeps the swap short, but it is a poor fit for high-load work on a hot CPU.
  • People who want a cheap spare cooling part on the shelf: the low price makes a backup easy to justify, though it is useless to anyone planning a move to a newer socket.

Things to Consider

The AM4-only limitation is the biggest caveat. It will not mount on AM5 or Intel LGA boards, so confirming the socket first avoids a purchase that cannot be used.
Cooling capability is entry level. Compared with multi-heatpipe towers or large liquid radiators, heat dissipation is modest, and a hot CPU under long sustained load will leave little thermal margin.
Although the footprint is a compact 97 mm square, check clearance for the side panel and memory in small cases. If low noise matters most, a cooler with better fan control and fan quality will satisfy you more.

FAQ

Q: Can it be installed on an AM5 motherboard?
AM5 uses different mounting holes, so it will not fit as-is.
Q: Do I need to buy thermal paste separately?
A: Paste is described as pre-applied. If you redo the installation, have a separate tube on hand.
Q: Is it enough for a high-end CPU?
A: This is an entry-level air cooler. For a hot CPU under heavy load, a larger cooler is the better match.

Product Disclosure (Amazon)

  • Manufacturer: A M D
  • Brand: AMD
  • Model: 712-000074 REV A
  • ASIN: B084XZSWC6
  • Note: This article covers a manufacturer-made product based on Amazon listing details.