NZXT H6(2026) White ミドルタワーPCケース CC-H62FW-01 CS9772

This article covers NZXT H6(2026) White ミドルタワーPCケース CC-H62FW-01 CS9772.

Overview

The NZXT H6 (2026) White is a mid-tower PC case featuring a seamless, single-piece curved tempered glass panel and a dual-chamber interior layout. The white finish gives it a clean, modern look that beautifully showcases your components. It supports up to ten 120mm fans and a 360mm radiator, offering excellent cooling flexibility. Measuring 292×420×448mm and weighing 7.94kg, it's a standard mid-tower size. It fits ATX, Micro-ATX, and Mini-ITX motherboards, and the power supply is housed in a separate secondary chamber to keep the main compartment tidy. This case is designed for gamers and power users who want to build a high-performance system with a focus on aesthetics and airflow. It's particularly suitable for those planning to use a large AIO liquid cooler or a flagship GPU.

Compatibility Guide

Motherboard: ATX, Micro-ATX, Mini-ITX. Also supports back-connector motherboards for cleaner cable routing. Power Supply: ATX PSU (max length 200mm). Mounted from the rear into the secondary chamber. Storage: 2× 2.5-inch bays, 1× 3.5-inch bay. Adequate for most users, but limited for multi-HDD setups. GPU Clearance: Up to 390mm (with 30mm front-right fan installed). Fits virtually all modern graphics cards. CPU Cooler Clearance: Up to 165mm. Accommodates large air coolers. Radiator Support: Top: up to 360mm (max 400mm length), Rear: 120mm.

Product Info

The NZXT H6 (2026) White was released in 2025 as a mid-range to high-end gaming case. It is sold as a base model without included fans, allowing users to customize their cooling setup. The main materials are steel and tempered glass, with fine mesh panels on the top, front-right, and right side for improved ventilation. Front I/O includes one USB 20Gbps Type-C, two USB 5Gbps Type-A, and a headset jack. It has 7 expansion slots and includes a GPU anti-sag bracket. The dual-chamber design separates the PSU and cables from the main area, providing a clean interior. ## Alternatives
Direct competitors include the Fractal Design North (around $130-140 USD) and the Corsair 4000D Airflow (around $90-100). The North offers a unique wooden front panel for a more natural look, while the 4000D Airflow is a simpler, more affordable option with good airflow. The H6 differentiates itself with its curved glass panel, dual-chamber layout, and back-connector motherboard support. If you prioritize aesthetics and efficient airflow, the H6 is a strong choice. However, if you need more storage bays or prefer a quieter case, consider the alternatives.

Best Use Cases

Gaming PC Builders: The H6 easily accommodates large GPUs and 360mm AIOs. The clean cable management is a bonus for showcasing RGB components. Aesthetics-Focused Users: The curved glass panel and white color make this case a showpiece. Ideal for those who enjoy displaying their hardware. Airflow Enthusiasts: The mesh panels and unique front-right fan position provide direct cooling to hot components. However, noise isolation is minimal. Not for Compact Builders: If you're building a small form factor PC, this case is larger than necessary. Look at Mini-ITX cases instead.

Things to Consider

No fans are included, so you'll need to purchase them separately. This adds to the initial cost. Only one 3.5-inch drive bay is available, limiting HDD expansion. Users with multiple hard drives should look elsewhere. The case is 292mm wide, which is wider than typical mid-towers. Ensure your desk or space can accommodate it. When installing a 360mm radiator in the top, check for clearance with motherboard VRM heatsinks and RAM. You may need to mount fans externally or choose a slim radiator. ## FAQ Q: Does this case support a standard ATX power supply? A: Yes, it supports ATX PSUs up to 200mm in length. The PSU mounts from the rear into the secondary chamber. Q: Can I install a 360mm liquid cooler in the top? A: Yes, the top supports up to 360mm radiators (max 400mm length). However, be mindful of thickness and clearance with motherboard components. A typical 25mm fan + 30mm radiator combo usually fits without issues. Q: Is this case good for quiet operation? A: No, it's designed for airflow rather than silence. Minimal sound-dampening material is used. If low noise is a priority, consider adding your own dampening or choosing a case designed for quiet operation.

Product Disclosure (Amazon)

• Manufacturer: NZXT
• Seller: Amazon.co.jp
• Fulfilled by: Amazon.co.jp
• ASIN: B0GQ8L13BG
• Note: This article covers a manufacturer-made product based on Amazon listing details.