This article covers キングストンテクノロジー Kingston FURY デスクトップPC用メモリ DDR5 AM5 AMD EXPO認定 5200MT.

Overview

Kingston FURY Beast DDR5 AM5 memory is a dual-channel kit tuned for AMD's latest platform. The KF552C36BBEK2-32 combines two 16GB modules for a total of 32GB capacity, running at 5200MT/s with CL36 latency. It strikes a solid balance between speed and affordability in the DDR5 landscape. The standout feature is AMD EXPO (Extended Profiles for Overclocking) certification. With a compatible AM5 motherboard, enabling EXPO in the BIOS instantly applies the optimized 5200MT/s profile without manual tweaking. The low-profile heat spreader keeps clearance tight for large CPU coolers. Positioned in the mid-range tier, this kit sits above entry-level 4800MT/s DDR5 while costing significantly less than high-end 6000MT/s+ kits. It's a practical choice for AMD Ryzen 7000-series builders who want reliable performance without overspending.

Compatibility Guide

This is a DDR5 memory kit and is physically incompatible with DDR4 slots. Verify your motherboard supports DDR5 before purchase. Optimized for AMD AM5 motherboards (B650, X670, A620, etc.) with EXPO support. It will also work on Intel DDR5 platforms (Z690, Z790, etc.) but will run at JEDEC 4800MT/s unless you manually set timings and voltage, as XMP 3.0 profiles are not pre-loaded. For dual-channel operation, install modules in the motherboard's recommended slots (typically A2 and B2). The heat spreader height is approximately 34mm, minimizing interference with large air coolers or top-flow coolers.

Product Info

Released in late 2022, the Kingston FURY Beast DDR5 AM5 kit comes with a lifetime warranty backed by Kingston's 30+ years of memory manufacturing expertise. Key specifications: Capacity: 32GB (2×16GB) Memory type: DDR5 Speed: 5200MT/s Latency: CL36 Voltage: 1.25V (EXPO enabled) Profile support: AMD EXPO * Heat spreader: Black, low-profile Market positioning: Mid-range. 5200MT/s offers a meaningful upgrade over 4800MT/s entry-level DDR5, providing sufficient bandwidth for gaming and creative workloads. It's a cost-effective alternative to 6000MT/s+ flagship kits.

Best Use Cases

First-time AM5 builders Pair this kit with a Ryzen 5 7600 or Ryzen 7 7700 for a well-balanced system. Enabling EXPO is straightforward, making it beginner-friendly. Budget-conscious gamers At 1080p or 1440p, the difference between 5200MT/s and 6000MT/s is minimal in real-world frame rates. Allocating the savings toward a better GPU or CPU is a smarter move. Quiet / low-power builds With a low 1.25V operating voltage, heat output is modest. This kit runs stable in compact cases with limited airflow or fanless configurations. Who should skip this kit Enthusiasts chasing extreme benchmark scores with 6000MT/s+ memory Intel platform users who want plug-and-play overclocking (EXPO won't work; manual tuning required)

Things to Consider

This kit is EXPO-optimized for AMD. On Intel platforms, you'll need to manually configure speed and timings since XMP 3.0 profiles aren't included. If you're building an Intel system, consider an XMP-certified DDR5 kit instead. 5200MT/s CL36 is entry-to-mid-range DDR5 performance. Pairing it with a flagship CPU like Ryzen 9 7950X or Core i9-14900K may create a memory bandwidth bottleneck. For such high-end builds, 6000MT/s or faster is recommended. Always check your motherboard's QVL (Qualified Vendor List) before purchasing. While Kingston FURY Beast is widely validated, some specific board revisions may have compatibility quirks. ## FAQ
Q: Can I use this on an Intel Z790 motherboard? A: Physically yes, but EXPO profiles won't load. The memory will run at JEDEC 4800MT/s unless you manually set 5200MT/s and timings. For Intel builds, choose Kingston FURY Beast DDR5 with XMP support (model numbers ending in XMP). Q: What if 32GB isn't enough? A: If your motherboard has four slots, you can add another identical kit for 64GB total. However, populating all four slots may reduce stability and overclocking headroom. For 64GB+ needs, consider a 2×32GB kit from the start. Q: What happens if I don't enable EXPO? A: Without EXPO, the memory runs at JEDEC default 4800MT/s CL40. The system will be stable, but CPU performance won't be fully utilized. Enabling EXPO is strongly recommended to get the advertised 5200MT/s speed.

Product Disclosure (Amazon)

  • Manufacturer: Kingston
  • ASIN: B0BD634T9M
  • Note: This article covers a manufacturer-made product based on Amazon listing details.