Overview
The Fractal Design Dynamic X2 GP-14 Black is a 140 mm case fan aimed at builders who want to add or refresh airflow inside a PC chassis. Its model number is FD-FAN-DYN-X2-GP14-BK, and the product is also listed with the identifier FN1063. Fractal Design rates it at 1000 RPM with a maximum airflow of 116 m³/h, a noise level of 18.9 dB(A) and a maximum static pressure of 0.71 mm H2O, which places it firmly in the quiet-balanced camp rather than the high-pressure camp.
It connects through a 3-pin fan header. The bearing is an LLS type, the impeller has seven blades, and the rated figures are 12 V, 1.32 W actual input and 0.2 A maximum rated current. The frame measures 140 x 140 x 25 mm with 125 x 125 mm mounting hole spacing, and the cable runs 500 mm. In the box you get one fan and four metal fan screws; no adapter or splitter cable is included.
This is an easy fan to consider when replacing a stock case fan or adding an extra intake or exhaust position. There is no RGB lighting and the finish is plain black, so it suits builds where the goal is quiet, understated cooling rather than visual flair.
Compatibility Guide
You need a case with a 140 mm fan mount. Because the mounting hole spacing is listed as 125 x 125 mm, check both the available space and the hole positions in your chassis before buying. Small cases that only accept 120 mm fans will not fit this fan at all.
Power comes from a 3-pin fan header on the motherboard. You can plug it into a 4-pin PWM header, but the fan itself is a 3-pin design, so how much speed control you get depends on the motherboard's handling of voltage-controlled fans. A system with no 3-pin header available is not a suitable host.
The cable is 500 mm long. In a large full-tower case where the fan sits far from the motherboard, measure the run first to make sure the length reaches. Since no splitter is bundled, plan on buying one separately if you want to drive several fans from a single header.
Product Info
The Dynamic X2 GP-14 Black dates back to June 2017 and has stayed in the lineup as a long-running staple. At 140 mm it sits in the entry-to-mid price bracket, which makes it a practical pick for swapping out a stock fan or adding one more airflow position without spending much. The modest 1000 RPM speed paired with an 18.9 dB(A) rating points to builds where low noise matters more than raw push.
Best Use Cases
- Quiet-focused builders who leave the PC running late at night: the low 1000 RPM speed and 18.9 dB(A) rating suit that routine, though a high-heat build needing aggressive exhaust will want more muscle.
- Owners replacing a worn 140 mm stock fan: four screws are included and the dimensions and hole spacing are published, so matching an existing mount is straightforward, while RGB-centric builds should look elsewhere.
- Secondary or office machines that need gentle extra airflow: the 3-pin hookup keeps setup simple, but anyone who wants fine-grained speed control is better served by a PWM fan.
Things to Consider
Because this is a 3-pin fan, buyers who expect precise PWM speed curves should weigh other options. The 0.71 mm H2O static pressure figure is modest, so it is a poor match for pushing through a dense radiator; it belongs in open case airflow positions. Cases without a 140 mm mount, or with different hole spacing, cannot use it, and no adapter or splitter is included, so multi-fan setups need extra parts. If maximum cooling headroom is the priority, a higher-speed, higher-pressure fan will serve that goal better.
FAQ
Q: Can I plug it into a 4-pin PWM header?
A: The connector is 3-pin and will physically fit a 4-pin header. How the speed is controlled then depends on the motherboard's fan logic, so do not assume full PWM behavior.
Q: Will it fit a 120 mm fan mount?
A: No. This is a 140 mm fan with 125 x 125 mm hole spacing, so the case must support 140 mm fans.
Q: Is it suitable as a radiator fan?
A: Its maximum static pressure of 0.71 mm H2O is on the low side for dense radiators. It is best used as a case intake or exhaust fan.
Product Disclosure (Amazon)
- Manufacturer: Fractal Design
- Model: FD-FAN-DYN-X2-GP14-BK
- ASIN: B071LSFGH2
- Note: This article covers a manufacturer-made product based on Amazon listing details.





