Overview

The FIFINE Ampligame SC3 is a desktop audio mixer built for streamers who want to control their voice and game audio without diving into software panels. It accepts an XLR microphone and an AUX source at the same time, and four sliders give independent control over microphone gain, line input, monitoring and line output. For a first streaming setup, that hands-on layout is the main draw.
The XLR input supports 48V phantom power, so a condenser microphone can run straight from the unit. Plug-in power microphones are not supported, and a dynamic/condenser switch lets you match the mode to the microphone you own. A row of RGB lighting modes adds some desk presence, and a long press on the light button turns it off when you want a plain setup. The chassis measures roughly 113 mm long, 165 mm wide and 42 mm tall, which fits beside a monitor without crowding the desk.

Connectivity & Compatibility

The mixer connects over USB and ships with both USB-A and Type-C cables plus an AUX cable. It works with a PC as well as PS4 and PS5, which suits people who keep a console and a computer on the same desk. Splitting duties between an XLR microphone and an AUX feed for game or background audio is the natural way to use it.
The headset jack comes with a caveat. Non-standard CTIA headsets do not pair well with it, and plugging one into the HEADSET jack can leave the headset microphone unable to input audio. Plan on capturing your voice through the XLR input rather than relying on a headset mic.
USB microphones are not supported at all. The mixer takes an analog microphone signal, while a USB microphone sends digital audio, so the two cannot be bridged. Cables marketed as signal converters will not make the combination work, so anyone with a USB microphone should look elsewhere.
Monitoring has a limit worth understanding before buying. The audio you monitor and the audio sent to the computer are the same signal, so you cannot monitor one source privately while keeping it out of the stream. If you want game audio in your ears but not in the broadcast, this mixer will not do that job.

Product Info

Check the retailer's page for the latest price. It bundles the essentials for a first XLR-based setup: four independent sliders, 48V phantom power, per-channel mute, RGB lighting, sound pads and a voice changer. That combination makes it a practical starting point rather than a studio-grade console.
Controls are physical. Mute works independently for the microphone, input/output and monitoring device, and the button lights white while a channel is muted so you can see the state at a glance. A short press of the MIC MONITOR button toggles monitoring on and off.
Four custom sound-effect buttons accept recordings of up to 15 seconds, handy for stingers and catchphrases during a stream. The voice changer offers 12 keys and six voice types, including male, female, robot, monster, baby and elderly, with a short press shifting the output tone.

Best Use Cases

  • New streamers who just bought an XLR microphone: phantom power and four independent sliders cover the basics in one box, but USB microphone owners should skip it.
  • Gamers running a PS5 and a PC on one desk: USB connectivity covers both and AUX lets game audio into the mix, though people who want private monitoring will be disappointed.
  • Creators who want sound effects and voice changes without extra gear: the four pads and voice changer add personality, while audiophiles chasing pristine capture should look higher up the range.

Product Disclosure (Amazon)

  • Manufacturer: FIFINE
  • Model: Ampligame SC3
  • ASIN: B0C85GC3HV
  • Note: This article covers a manufacturer-made product based on Amazon listing details.