Overview
The TOPPING DX1 II packs a USB DAC, headphone amplifier, preamp and optical digital input/output into a chassis measuring just 100×100×32mm. One USB Type-C cable to a PC is enough to replace onboard audio with something considerably more capable, which makes it an easy first step for desktop listeners who have outgrown the motherboard jack.
At its core sits the ESS ES9039Q2M, driven through a four-channel fully balanced topology that runs from the DAC stage all the way to the output. The 4.4mm balanced output delivers up to 1000mW×2 at 32Ω and 64Ω, and a two-step High/Low gain switch lets the same box serve sensitive IEMs and harder-to-drive headphones without swapping hardware.
For gaming, the 3.5mm output is a four-pole headset jack, so a headset with an inline mic plugs straight in. Mic input is captured at up to 192kHz/24bit, which keeps voice chat and recording clean without a separate interface. That combination of DAC and mic input in one small unit is the practical argument here.
Connectivity & Compatibility
A single USB Type-C port on the rear handles both digital input and power from the host PC. The USB Audio Class can be switched between UAC1.0 and UAC2.0 on the back panel, so consumer game consoles that rely on UAC1.0 can use the DX1 II as a gaming DAC as well.
On the analog side you get 4.4mm balanced and 3.5mm headphone outputs, plus RCA single-ended and 4.4mm balanced line outputs. The line outs can run in fixed DAC mode or in preamp mode with volume control, which allows a direct connection to a power amplifier or active speakers.
Independent OPTICAL input and output are included, supporting up to PCM 192kHz/24bit and DSD64 DoP. A TV, CD player, console or network player with an optical port can all feed into the same unit. Settings are handled through the TOPPING Home Web APP in a PC browser, covering a 10-band PEQ, gain and output mode, and the bundled remote mirrors those controls from the desk. In Low gain the 3.5mm output keeps the noise floor below 0.9μVrms, which matters with high-sensitivity IEMs.
Product Info
The DX1 II sits in the mid tier of desktop audio: an ES9039Q2M DAC with a compact footprint, balanced drive and optical I/O rather than a stripped-down entry unit. It does not force you to choose between DAC, headphone amp and preamp duties, and the optical ports widen its role beyond the PC desk. For someone moving up from onboard sound, it is a sensible single-box starting point.
Best Use Cases
- PC gamers running a headset with an inline mic: the four-pole 3.5mm jack and 192kHz/24bit mic input remove the need for a second box, though anyone who never uses voice chat gains little from it.
- Listeners who swap between sensitive IEMs and demanding headphones: 1000mW×2 on the balanced output, two gain steps and a 10-band PEQ cover both ends, while single-ended-only users will not use the extra headroom.
- Desk setups that also feed a TV or console: optical input and the UAC1.0 switch let several sources share one chassis, but a room with no optical gear and no console gets less value from those ports.
Product Disclosure (Amazon)
- Manufacturer: TOPPING
- Brand: Topping
- Model: DX1II
- ASIN: B0HCMLGXX9
- Note: This article covers a manufacturer-made product based on Amazon listing details.





