Overview
The Thermaltake Versa H17, sold under model number CA-1J1-00S1NN-00, is a mini tower chassis built around a clean, understated front panel. It accepts microATX and Mini-ITX motherboards, which makes it a sensible starting point for a compact build that still leaves room for expansion.
Cooling flexibility is a clear part of the design: the case can hold up to five case fans and accommodates a liquid cooling radiator up to 280mm in size. Graphics cards can measure up to 350mm, so longer cards are not automatically ruled out.
A power supply cover runs along the bottom of the interior, giving you a place to tuck excess cabling. The case is distributed in Japan as a CS7096 model through the official agency channel. Its dimensions are roughly 396 mm long, 205 mm wide and 437 mm tall, with a weight of about 4.5 kg.
Compatibility Guide
Motherboard support is limited to microATX and Mini-ITX. An ATX board will not fit, so check your board's form factor before anything else when planning a build or a parts carry-over.
Expansion cards can be up to 350mm long. That covers a wide range of graphics cards on length alone, but card thickness and the routing of power cables still deserve a look before you commit.
For cooling, the chassis takes up to five case fans and a radiator of up to 280mm. Where you mount the radiator changes what else fits around it, so sketch out the fan layout before buying parts.
The power supply sits inside the bottom cover, which helps keep unused cables out of sight. A unit with reasonably long cables makes the build process easier.
Product Info
The Versa H17 was released on 9 February 2018 and has remained a long-running option in the mini tower segment. Its footprint is roughly 396 x 205 x 437 mm, and it weighs about 4.5 kg.
In market terms this is an entry-to-mid tier case. The restrained front panel and the internal room for a 280mm radiator and a 350mm graphics card make it a practical pick for builders who want expandability without paying for premium materials or elaborate styling.
Best Use Cases
- First-time builders working with a microATX or Mini-ITX board: the narrow form factor support keeps the planning simple, but anyone set on an ATX motherboard should look elsewhere.
- Desk setups in living rooms or studies where a loud-looking chassis would stand out: the plain front panel blends in, though buyers chasing RGB-heavy styling will find it too plain.
- Builds centered on a longer graphics card: the 350mm clearance removes most length worries, while multi-radiator custom loop plans are better served by a larger chassis.
Things to Consider
Because ATX motherboards are not supported, anyone reusing an existing ATX board will need to change cases or change boards. Plan around microATX from the start if you want to keep the platform.
Support for five fans and a 280mm radiator does not guarantee every combination fits at once. Radiator thickness, card thickness and cable routing all interact, so decide the layout before ordering parts.
This is a design from 2018, not a chassis built around the largest current-generation graphics cards. If you are planning a top-end modern build, compare it against newer cases before deciding.
FAQ
Q: Can I install an ATX motherboard?
A: No. Support is limited to microATX and Mini-ITX, so confirm your board's form factor before buying.
Q: Will a long graphics card fit?
A: The case allows expansion cards up to 350mm. Length is covered within that range, but check card thickness and power cable routing as well.
Q: Does it support an all-in-one liquid cooler?
A: It accepts a radiator up to 280mm. Mounting position affects what else fits, so plan the fan layout together with the radiator.
Product Disclosure (Amazon)
- Manufacturer: Thermaltake
- Model: CA-1J1-00S1NN-00
- ASIN: B077GBTN76
- Note: This article covers a manufacturer-made product based on Amazon listing details.





