Overview
The RAIJINTEK ZOFOS ELITE SF4, model number 0R20B00248, is a full tower chassis built around E-ATX motherboards. Its defining trait is a layer of sound-dampening material that RAIJINTEK calls Silencio, applied inside the case to keep noise in check. Cooling is handled out of the box by four 14025 PWM fans, so the design tries to balance quiet operation with steady airflow rather than picking one side.
Physically it measures roughly 485 mm long, 232 mm wide and 505 mm tall, with a weight of about 11.45 kg. That is a lot of enclosure to place, and the power supply bay accepts ATX units up to 245mm deep. Buyers should treat this as a stationary desktop case rather than something to move around often.
The ZOFOS ELITE SF4 suits builders who want a large board and a long power supply inside one quiet box. It makes no attempt at compactness, and that is clearly a deliberate choice.
Compatibility Guide
The supported motherboard form factor is E-ATX, and the interior is sized with large boards in mind. Smaller ATX and Micro-ATX boards will physically fit, but the extra room is the whole point of choosing this chassis.
For power, the case takes standard ATX units with a maximum depth of 245mm. High-capacity ATX supplies tend to be longer, so measure your existing unit before committing. The four bundled 14025 PWM fans rely on motherboard headers for speed control, which means you should count your available PWM headers before the build.
Because the panels are lined with dampening material, thermal behavior differs from an airflow-first mesh case. Plan cooling around that characteristic rather than assuming open-frame airflow.
Product Info
Check the retailer's page for the latest price. It is a value-oriented route to a quiet large-format build.
The exterior comes in at about 485 mm long, 232 mm wide and 505 mm tall, weighing roughly 11.45 kg. ATX power supplies up to 245mm deep are supported, and four 14025 PWM fans are included as standard. The Silencio dampening material inside is what pushes the acoustic profile in a quieter direction.
Best Use Cases
- Builders who want a large E-ATX board in a quiet workstation: the dampened interior and four stock PWM fans give a starting point for balancing noise and heat, though airflow-first buyers should look at mesh designs instead.
- People with room under a desk for a substantial tower: the full tower volume makes component installation roomy, while anyone short on floor space should skip it.
- Owners of a long ATX power supply already on hand: the 245mm depth allowance accommodates larger units, but a compact build around a small PSU would be overkill here.
Things to Consider
Measure your space first. At roughly 505 mm tall and 485 mm deep, this case dominates a desk or floor area, and at about 25.24 pounds it is not something you relocate casually. Check shelf and desk clearances before ordering.
Sound-dampened cases generally run warmer than mesh-fronted alternatives, so a high-heat build will need fan curves raised to compensate. The 245mm power supply limit is another hard constraint; unusually long high-wattage units may not fit. If silence is not a priority, a smaller mid tower will be easier to live with.
FAQ
Q: Can I install a standard ATX motherboard?
A: Yes. The listed form factor support is E-ATX, and smaller ATX or Micro-ATX boards fit physically, though you will be using only part of the interior space.
Q: Are the included fans speed-controlled?
A: The four bundled 14025 fans are PWM models, so they connect to motherboard PWM headers for speed control. Confirm you have enough headers before the build.
Q: Is this a silence-first or cooling-first case?
A: It leans toward silence with Silencio dampening while still providing four PWM fans, so it is a balanced design. For maximum airflow, a ventilated mesh case is the better fit.
Product Disclosure (Amazon)
- Manufacturer: RAIJINTEK
- Model: 0R20B00248
- ASIN: B0CX9CTJW6
- Note: This article covers a manufacturer-made product based on Amazon listing details.





