Overview

PCCOOLER's CPS R400 ARGB is an air CPU cooler aimed at builders who want tidy cooling without spending much. The model is the R400 ARGB WH, finished in white, and its heatsink is topped with a TriForce-textured cover that carries the brand logo and supports ARGB lighting.
Cooling comes from four 6mm heat pipes paired with a 92mm PWM ARGB fan. PCCOOLER rates the cooler for 180W TDP, and the fan spins up to 2200RPM with a design that balances airflow against static pressure. The overall footprint measures 95 mm long, 88 mm wide and 133 mm tall, with the height held to 133mm.
That compact height makes it easy to fit into many mid-tower cases and keeps it clear of memory modules. With a clean white look and a manageable size, it suits a first build or a secondary machine rather than a flagship cooling setup.

Compatibility Guide

The mounting list covers Intel LGA 1851, 1700, 1200 and 115X, plus AMD AM5 and AM4. Support for LGA 1851 and AM5 means it works on current platforms without an adapter hunt. The bracket has been redesigned to make securing the cooler to each socket more straightforward.
At 133mm tall, the R400 ARGB WH fits cases with tighter CPU cooler clearance, so check your chassis height limit before ordering. Because the fan is 92mm, the heatsink is narrower than large side-flow towers, which generally leaves room around tall memory heat spreaders.
Power draw is not a cooler-side concern; plan around the total system load from the CPU and graphics card. If you want the ARGB lighting, the cooler needs a connection to an ARGB header on the motherboard, so confirm how many headers your board provides.

Product Info

The R400 ARGB WH combines four 6mm heat pipes, a 92mm PWM ARGB fan and a 180W TDP rating. Dimensions are 95 x 88 x 133 mm, fan speed reaches 2200RPM and the fan size is 92mm. Pricing sits in the affordable range, placing the cooler in the entry-to-mid segment of the market. It does not chase the cooling headroom of large premium towers or AIO liquid coolers; instead it balances ease of installation and cost.

Best Use Cases

  • First-time builders on a tight budget: it offers more headroom than a stock cooler and matches a white case theme, though it is not the right pick for a very high-heat CPU.
  • Small or secondary builds with height limits: the 133mm height fits tighter chassis and the ARGB cover adds visual interest, but people chasing maximum cooling should look elsewhere.
  • Light gamers who want quiet operation with lighting: the 92mm PWM fan responds to load and the ARGB top cover adds flair, while performance-first builders will want a bigger cooler.

Things to Consider

The 180W TDP figure is the maker's stated guideline, and headroom shrinks when a high-end CPU runs at full load for long sessions. If your chip runs hot, a larger heatsink or a liquid cooler is the safer route. A 92mm fan also tends to need higher RPM for a given airflow than a larger fan, so noise can become noticeable under heavy load; plan on tuning the fan curve if silence matters. Finally, the ARGB effect depends on a compatible motherboard header, so check that before buying.

FAQ

Q: Can it be mounted on an LGA 1700 CPU directly?
A: LGA 1700 is on the supported socket list, so the included bracket handles installation. Still confirm your motherboard's backplate arrangement beforehand.
Q: Will it collide with memory modules?
A: The 133mm-tall compact design keeps interference low, and even memory with taller heat spreaders usually has room. Check your case layout to be sure.
Q: Is it enough compared with a large air cooler?
A: It is a mid-class 180W TDP cooler, not a match for extreme cooling of power-hungry CPUs. For typical gaming builds and everyday CPUs it is an easy choice to work with.

Product Disclosure (Amazon)

  • Manufacturer: PCCOOLER
  • Model: R400 ARGB WH
  • ASIN: B0D5R1DQNK
  • Note: This article covers a manufacturer-made product based on Amazon listing details.