Overview

Novonest's UE2-Elite is a dual-tower air cooler built around eight 6mm heat pipes. The manufacturer listed for the product is upHere, and the model number is UE2-Elite-CPU FAN. The heat pipes make direct contact with the CPU heat spreader, and the company rates the cooler for CPUs up to a 280W TDP.
Cooling comes from a pair of 120mm PWM fans that spin between 600 and 1650 RPM with a plus or minus 10 percent tolerance. Rated airflow tops out at 116 m³/h, and the published noise figure is 27dB(A) or lower. Hydraulic bearings are used in both fans, which suits a desktop that runs for long stretches.
A magnetic top cover is the other distinctive touch. It seats without tools and lifts off quickly when you need to reach the area around the motherboard. The heat pipe angles are arranged to keep the cooler clear of the memory slots, so tall modules are less of a headache than they often are with large heatsinks.

Compatibility Guide

On the Intel side the cooler lists LGA1851, LGA1700, LGA1200, LGA115x, LGA2011 and LGA2066. AMD coverage runs to AM5 and AM4. That spread covers current mainstream builds as well as older platforms, so it works both for a fresh assembly and for refreshing the cooling on an existing machine. Installation uses the bundled mounting bracket and fastening hardware.
A dual-tower design needs vertical room. The published dimensions are roughly 122 mm long, 123 mm wide and 155 mm tall, with a weight of about 948 g. Many mid-tower cases will accommodate it, but measure the clearance to the side panel before you buy.
Because the layout is shaped to avoid the memory area, systems with heatspreader-equipped modules are easier to work with. The fans can also be handled without removing them, which trims assembly time. Motherboard backplate and screw hole layouts differ between platforms, so check the mounting points on your board before starting.

Product Info

The UE2-Elite sits in the mid-to-upper range of air coolers. Eight heat pipes and two 120mm fans put it close to the hardware you would expect from premium air cooling, while the magnetic cover and memory clearance work add practical value. The 280W TDP rating is the number to weigh if you plan to cool a power-hungry CPU without moving to liquid cooling.
Dimensions are about 122 x 123 x 155 mm, and the unit weighs roughly 948 g. The fans run from 600 to 1650 RPM with a plus or minus 10 percent tolerance, deliver up to 116 m³/h and are rated at 27dB(A) or below. Sales are handled mainly through online retail, and the price bracket is approachable for an air cooler of this size.

Best Use Cases

  • Builders cooling a high-power CPU on air: the eight heat pipes and dual fans back up the 280W rating, so a large liquid loop is not mandatory. Skip it if your case has a tight height limit.
  • Upgraders who keep tall memory installed: the heat pipe angles are arranged to stay clear of the DIMM slots, which makes a cooler swap less fiddly. People chasing the lowest possible noise should compare slower-spinning designs.
  • First-time builders who want fewer steps: the magnetic top cover goes on and off without tools, and the fans stay in place during work. Enthusiasts who want deep fan-curve control may find the setup limiting.

Things to Consider

The dual-tower format trades space for thermal headroom. At about 155 mm tall, the cooler can interfere with slim cases and compact microATX chassis, so confirm the case's supported cooler height first.
The 280W figure is a manufacturer rating, and real headroom depends on case airflow and room temperature. A case with weak intake and exhaust will not let the cooler reach its potential.
The 27dB(A) claim refers to the fans themselves. Noise rises in the upper RPM range, so plan on tuning the fan curve if quiet operation matters. The magnetic cover is convenient, but handle it with care in environments where strong magnets are a concern.

FAQ

Q: Will it mount directly on an LGA1700 motherboard?
A: LGA1700 is on the supported socket list, and installation uses the bundled bracket and fastening hardware. Still check your case's height limit and your memory height separately.
Q: How does it compare with a liquid cooler?
A: As an air cooler it needs no pump or radiator, which keeps the build simple. The trade-off is a large heatsink that needs room. If your case is short on height, a low-profile air cooler or a liquid option is the more realistic path.
Q: Is it a good fit for a quiet build?
A: The 600 to 1650 RPM range and the 27dB(A) rating suggest comfortable everyday noise levels. Since the design prioritizes airflow under load, pair it with a tuned fan curve if near-silence is the goal.

Product Disclosure (Amazon)

  • Manufacturer: upHere
  • Brand: ｎｏｖｏｎｅｓｔ
  • Model: UE2-Elite-CPU FAN
  • ASIN: B0FB2HB6VW
  • Note: This article covers a manufacturer-made product based on Amazon listing details.