This article covers Montech HS02 PRO (B) ブラック.

Overview

The Montech HS02 PRO (B) is a mid-tower ATX case that blends high airflow with a tempered glass side panel. It ships with four ARGB fans (three front, one rear) and an integrated LED controller, making it a compelling choice for budget gaming builds. The case supports ATX, MicroATX, and Mini-ITX motherboards, offers up to 400mm of graphics card clearance, and can host a 360mm radiator in the front. With a footprint of 450×215×480mm, it balances expandability with a manageable desktop footprint. This is a value-oriented product aimed at gamers who want strong cooling and customizable lighting without spending a fortune.
The case is built from steel and weighs roughly 6.8kg, which is typical for its class. It comes with a full mesh front panel for maximum airflow, and the tempered glass side window lets you show off your components. The included LED controller cycles through preset color modes via a button on the front I/O, though it does not sync with motherboard software. Overall, this is a straightforward case that delivers the essentials for a modern gaming PC at an aggressive price point.

Compatibility Guide

This case accepts standard ATX, MicroATX, and Mini-ITX boards, covering the vast majority of consumer builds. The power supply bay fits ATX units up to 180mm deep, which is generous for most modern PSUs. Graphics card clearance stretches to 400mm, so even the largest RTX 4090 or RX 7900 XTX variants will fit with room to spare. CPU cooler height is limited to 165mm, which excludes a few massive air towers but allows most 240mm and 280mm AIO coolers. The top mounting points accept a 280mm radiator, while the front handles a full 360mm setup. Rear exhaust can be a single 120mm fan or radiator. There are internal drive bays, but their exact capacity is not listed; plan for two 2.5-inch SSDs and a couple of 3.5-inch HDDs based on typical layouts.
Keep in mind that the front mesh panel is not a filter but a simple grille, so dust buildup can be an issue. Adding a third-party filter or cleaning routinely is recommended. Also, the PSU installation is bottom-mount, so ensure your cables are long enough to reach the top of the motherboard in a mid-tower design.

Product Info

Released in the later half of 2024, the Montech HS02 PRO (B) occupies the entry-to-mid tier of the case market. It is sold through major retailers in Japan for around ¥9,980 (about $70 USD), which is aggressive for a case that includes four fans and a tempered glass panel. The case comes with a standard one-year warranty through the manufacturer (regional specifics may vary). It supports air cooling out of the box with its mesh front and rear exhaust, and liquid cooling via the front 360mm and top 280mm mounts. Its market position is clear: it targets first-time builders and budget-conscious gamers who want a complete package with good airflow and RGB.
In terms of value, the HS02 PRO stands out by bundling four ARGB fans and a simple lighting controller at no extra cost. Compared to competitors like the ASUS Prime AP201 or the Corsair 4000D Airflow, it offers more included fans and a lower street price, though you sacrifice premium build touches and RGB synchronization capabilities.

Best Use Cases

This case shines for first-time PC builders who want minimal hassle. With four fans pre-installed and a simple LED controller, you can skip the extra fan purchase and wiring – just plug in the motherboard and go. It also suits gamers who plan to install a high-end GPU or a 360mm AIO; the 400mm GPU clearance and front radiator support give you room to upgrade later. Regarding who should avoid it: if you need 5.25-inch optical bays or masses of internal HDD mounts for a file server, this case is not the right fit. Similarly, if you demand absolute silence, the mesh front lets in more noise than a damped, closed-panel design.
For creative professionals building a workstation, the large GPU allowance handles the biggest accelerators, and the 280mm top radiator slot fits most dual-fan AIOs. However, if you're aiming for a compact ITX living room PC, this mid-tower will be unnecessarily large and heavy.

Things to Consider

One limitation is that the LED controller does not sync with motherboards, so you cannot adjust lighting via software or sync it with other RGB components. The case is also fairly heavy at about 6.8kg, which is typical for a steel-and-glass mid tower. The mesh front collects dust quickly, so you'll need to clean the filter periodically. Compared to similar-priced rivals like the ASUS Prime AP201 or Corsair 4000D Airflow, the HS02 PRO offers more included fans and a lower street price, but you give up advanced RGB sync and premium build touches. Over-specification is unlikely for a case – its size is manageable – but if you plan a very small form factor build, this is obviously too large.
Another point: the top fan mounts accept 120mm or 140mm fans, but the mesh on

Product Disclosure (Amazon)

  • Manufacturer: Montech
  • Seller: CFDストア【インボイス対応/適格請求書発行事業者】
  • Fulfilled by: CFDストア【インボイス対応/適格請求書発行事業者】
  • ASIN: B0F6CKFRLD
  • Note: This article covers a manufacturer-made product based on Amazon listing details.