This article covers Monoprice Cat6A イーサネットバルクケーブル.
Overview
The Monoprice Cat6A Ethernet Bulk Cable in 500ft purple is a structured-cabling product aimed at permanent LAN wiring inside walls, ceilings, and riser shafts. It uses 23AWG solid pure bare copper conductors with an F/UTP foil shield, and it is tested to 550MHz bandwidth while supporting 10GBASE-T (10G) transmission. The cable arrives on a 500ft reel-in-box with printed length markings so you can cut exactly what you need and know how much remains on the spool. Its purple jacket makes it easy to identify among multiple cable runs on a job site. The market positioning is mid-to-high tier for bulk cable: UL-listed, CMR riser-rated, TAA-compliant, and built with solid bare copper, this is closer to commercial-grade stock than typical consumer Ethernet cable. It fits both home renovation projects and small-office network builds where a permanent, future-proof drop is required.
Connectivity & Compatibility
This is bulk cable, so it ships without RJ45 connectors. You need to terminate each end with RJ45 plugs or keystone jacks that accept 23AWG solid conductors, plus the appropriate crimping tool. For the F/UTP shield to work properly, shielded RJ45 connectors and a suitable ground connection are recommended, so read the connector and keystone instructions carefully. The cable is compliant with ANSI/TIA 568-C.2 and supports IEEE 802.3af (PoE) and IEEE 802.3at (PoE+). That means it can simultaneously carry data and power to IP cameras, access points, and other PD devices. It also works with 10GBASE-T, 5GBASE-T, 2.5GBASE-T, and 1000BASE-T networks, so you can use it on today's gear and keep it in place for tomorrow's upgrades.
Product Info
As of September 5, 2026, the cable is listed at about ¥58,992 on . The package contains a 500-foot reel-in-box with length markings; no connectors or tools are included. Warranty details should be confirmed with the seller or Monoprice's official channels. Positioned at the upper end of bulk LAN cabling, this product stands out for its combination of pure bare copper, F/UTP shielding, CMR fire rating, and TAA compliance. These are features you normally expect in commercial installations, not in basic retail spools. If you are investing in new wiring, the 10G support gives you headroom for future upgrades.
Best Use Cases
DIY home network installers will like the 500ft capacity and riser rating for running drops through walls or attic spaces in one pass. For a single short run, though, this is massively oversized, and a ready-made patch cable is the better choice. Office or retail IT staff planning a 10G-ready structured cabling upgrade benefit from the TAA and UL certifications, which ease procurement approvals. If your plan is just to connect two desks temporarily, a bulk spool only adds unnecessary work. Anyone deploying PoE-powered IP cameras or wireless access points can take advantage of the 802.3af/at compliance to eliminate separate power cabling. Be careful if your building requires plenum-rated cable in air-handling spaces; this CMR-rated product is not a substitute for plenum-grade CMX/CMG stock.
