Overview

The Hanye E30 is a 1TB NVMe solid-state drive built on the M.2 2280 form factor and a PCIe Gen3x4 interface. It pairs a Gen3 controller with 3D TLC NAND, and Hanye rates sequential reads at up to 3600MB/s and sequential writes at up to 3200MB/s. Those figures sit close to the practical ceiling of the PCIe 3.0 x4 link.
The model number is E30-1TBTN1, and it is sold in Japan through an authorized distributor with a five-year manufacturer warranty. That combination of capacity, speed rating and coverage makes it a sensible pick for people who want a noticeable step up from a SATA drive without paying Gen4 prices.
This is a mid-tier part rather than a flagship. It does not chase the highest sequential numbers on the market, and it does not need to. For game libraries, media scratch space and a system drive in a mainstream build, the rated speeds are already well beyond what most everyday workloads can saturate.

Compatibility Guide

The drive uses PCIe Gen3x4 with the NVMe protocol and measures 22mm wide by 80mm long, the standard M.2 2280 size. Any motherboard with an NVMe-capable M.2 slot will accept it. A slot wired only for SATA will not detect the drive, so check the board manual before buying.
Installing it in a Gen4 or Gen5 slot works fine; the link simply negotiates down to Gen3 speeds. On older Gen3 boards with an NVMe slot, the drive can reach its full rated performance. Either way, the physical fit is the same.
One practical detail: the package does not include the screw that secures an M.2 drive to the motherboard. If your board's mounting hardware is missing, plan for that separately. The drive also ships uninitialized, so you will need to initialize and format it in Disk Management before first use.

Product Info

The E30-1TBTN1 offers 1TB of capacity over PCIe Gen3x4 NVMe in the M.2 2280 form factor, with sequential ratings of 3600MB/s read and 3200MB/s write. It is positioned in the entry-to-mid range of the market, where buyers prioritize capacity and a clear upgrade over SATA rather than chasing the fastest possible sequential benchmark.

Best Use Cases

  • Upgrading an older laptop or desktop from a SATA SSD: the jump to a 3600MB/s read rating is felt in boot times and app launches, though anyone chasing Gen4 peak numbers should look elsewhere.
  • Adding a second drive for a game library: 1TB holds several large titles and the M.2 slot install needs no cabling, but buyers wanting a bundled heatsink should keep looking.
  • Building a budget workstation for photo and video work: fast asset loading at a modest price suits this role, while benchmark-focused enthusiasts will find it underwhelming.

Things to Consider

Because this is a Gen3 design, sequential throughput tops out below Gen4 and Gen5 drives. In real use the gap is often smaller than the spec sheet suggests, so weigh the price difference rather than the headline numbers alone.
Older boards with SATA-only M.2 slots or no NVMe support cannot use this drive at all, so verify the slot type first. The missing mounting screw is a small but real friction point, and the uninitialized state means setup is required before the drive appears in Windows.

FAQ

Q: Can I use this drive to expand storage in a PlayStation 5?
A: It is an M.2 2280 NVMe drive, but Sony sets specific requirements for PS5 expansion. Check those requirements against this drive's specifications before committing.
Q: Will it work in a Gen4 motherboard?
A: Yes. The slot is backward compatible and the drive will run at Gen3 link speeds without any issue.
Q: Does it come with a heatsink?
A: The product information does not list a heatsink. Use your motherboard's M.2 heatsink or supply one separately if needed.

Product Disclosure (Amazon)

  • Manufacturer: Hanye
  • Model: E30-1TBTN1
  • ASIN: B0BXDH7K8P
  • Note: This article covers a manufacturer-made product based on Amazon listing details.