The EsportsTiger ICE Mouse Feet are replacement PTFE skates die-cut specifically for the ENDGAME GEAR XM1r and XM1 RGB. They use high-purity PTFE and sit on the fast end of EsportsTiger's lineup.
This article covers how to confirm compatibility, how to install them properly, and — just as important — who should skip them.
Overview
The short version: this is a consumable for people who already own an XM1r or XM1 RGB and either have worn-out stock skates or want a lighter, faster glide. It does not improve the mouse itself; it reshapes the friction between the mouse and the pad.
One set is included, skates only, and installation takes a few minutes.
Pure PTFE is the standard material for mouse skates because of its low friction coefficient and consistent behavior on both cloth and hard pads. The ICE skates have rounded edges, which is the main reason they resist snagging on soft cloth surfaces that the mouse sinks into.
Amazon.co.jp reviews stood at 12 ratings and 4.3 out of 5 stars (roughly 86% positive) as of June 2026.
The score is solid, but 12 reviews is a very small sample. Buy based on model fit and glide preference, not on the star average.
What Changes When You Swap Skates
Two things change: static friction (how easily the mouse starts moving) and dynamic friction (resistance while moving). A fast skate like the ICE lowers static friction, so micro-corrections and small target adjustments take less force.
The trade-off is stopping precision. Low-sensitivity players who swipe with the whole arm usually benefit from a faster glide; high-sensitivity fingertip players often report overshooting.
Swapping skates is a trade-off, not a straight upgrade.
Thickness matters too. A different skate height slightly changes the distance between the sensor and the pad, which can alter how lift-off feels.
Give yourself some time to adapt right after installing.
Connectivity & Compatibility
Compatibility is simple but unforgiving:
| Model | Supported |
|---|---|
| ENDGAME GEAR XM1r | Yes |
| ENDGAME GEAR XM1 RGB | Yes |
| ENDGAME GEAR XM1 (original) | No |
This is the main pitfall. All three model names contain "XM1", so you have to check the suffix.
Look at the label on the bottom of your mouse or your order history before buying. The original XM1 has a different skate shape, so the cutouts will not line up.
There is effectively no pad restriction — pure PTFE works on cloth, hard, and hybrid surfaces. The rounded edges help most on coarse cloth pads.
On glass or very fast hard pads the baseline friction is already low, so the difference is smaller, and wear happens faster on abrasive hard surfaces.
No power or interface requirements, and no disassembly. Swapping skates does not normally void a mouse warranty, but check your mouse maker's terms if that matters to you.
Product Info
Specifications: pure PTFE material, white, compatible with the ENDGAME GEAR XM1r and XM1 RGB, one set per package. The package is sold as an authorized Japanese distributor item; warranty details are printed on the package.
Only the skates are included — bring your own alcohol wipes.
The price captured in August 2026 on Amazon.co.jp was ¥1,300, a standard bracket for replacement skates.
Prices change often with stock and sales, so check the product page for the current figure. The eBay listing shows no fixed price, so no figure from that source is quoted here.
Think about cost per replacement cycle rather than unit price. Wear depends heavily on usage hours, pad surface, and swipe size.
Once the glide stops recovering, it is time to replace them — cheap enough to buy spares.
Installation Tips
Power off the mouse; remove batteries or the receiver on wireless models.
Peel the stock skates from one edge with tweezers or a toothpick, not your fingernail.
Wipe off all remaining adhesive with alcohol on a cloth or cotton pad.
Let the base dry completely before applying.
Align the new skate first, then press it down for several seconds with your fingertip.
Steps 3 and 4 matter most. Leftover adhesive tilts the skate slightly and causes uneven wear.
The adhesive also needs time to set, so avoid long, aggressive sessions immediately after installing or the edges can lift. Keep the sensor window clear and avoid touching the gliding surface.
Comparison With Alternatives
Corepad, Tiger Arc, and others also make skates for the XM1r and XM1 RGB. Pure PTFE is common to all of them, so the real differences are thickness, edge treatment, and adhesive quality.
Thinner skates glide faster but lower the mouse; thicker ones do the opposite.
The ICE is positioned at the fast end of EsportsTiger's own range, so relative to a typical PTFE skate it is a speed choice, not a control choice. If what you actually want is easier stopping, this is the wrong direction.
Compare by glide character rather than by star ratings.
Best Use Cases
- Low-sensitivity FPS/TPS players — lighter initial movement makes large swipes feel more direct.
- Long-term XM1r / XM1 RGB owners with worn skates — restores near-new glide for far less than a new mouse.
- Tuning-minded players — at around ¥1,300 (captured August 2026), it is a cheap way to experiment with feel.
- Cloth pad users bothered by edge snagging — the rounded edges specifically target that complaint.
Things to Check Before Buying
Model fit is the biggest risk. The original XM1 is not supported, and the three model names look nearly identical.
Verify the r or RGB suffix on your mouse before ordering. Getting this wrong costs you a return and a week of waiting.
Faster is not always better. High-sensitivity fingertip players who value stopping accuracy may find the ICE overshoots.
If you have no complaints about your current stopping precision, there is no reason to change. Skates are a preference part, not a skill upgrade.
These are consumables. PTFE is soft and wears down, faster on hard or textured pads.
Expect a recurring cost. Also note that peeling and re-sticking a skate weakens the adhesive, so align carefully the first time.
Listing data can be wrong. Retail listings are partly auto-generated, and seller or compatibility fields sometimes disagree with the physical product; the price fields for this item are not formatted consistently across sources either.
Match the product image and model number yourself before ordering, and scan reviews for fit complaints.
Small review sample. 12 ratings at 4.3/5 (June 2026) is fine but statistically noisy. Decide on model fit and glide direction instead.
FAQ
Q. Will these fit the original XM1?
A. No. Only the XM1r and XM1 RGB are supported; the shape differs.
Q. How much faster are they than stock? A.
No published measurement exists. They sit on the fast side of EsportsTiger's range, so expect a lighter glide than stock.
The exact feel depends on your pad.
Q. Do they work on cloth pads? A.
Yes. The rounded edges are designed to reduce snagging on soft cloth, and they also work on hard and hybrid pads.
Q. How long does installation take? A.
A few minutes, though the result is more consistent if you take your time removing adhesive and letting the base dry.
Q. How often do they need replacing? A.
It varies with hours, pad material, and swipe size. Replace them when the glide feels noticeably heavier or the edges start catching.
Q. How many skates are in a set?
A. The spec lists one set, covering one XM1r / XM1 RGB. Buy multiple sets if you want spares.
Product Disclosure (Amazon)
- Manufacturer: EsportsTiger
- ASIN: B09C8LD3S9
- Note: This article covers a manufacturer-made product based on Amazon listing details.
