This article takes a close look at BestParts 2U フェイスプレート Dell PowerEdge R720 R730 R820 R830に対応 — which servers it actually fits, and the mistakes buyers most often make.
Overview
BestParts 2U フェイスプレート Dell PowerEdge R720 R730 R820 R830に対応 is a replacement front bezel (faceplate) for Dell PowerEdge 2U rack servers. Let's be clear up front: this is not a performance part.
It is a replacement for a missing or broken cosmetic and protective panel, and its primary buyer is someone who bought a used PowerEdge that shipped without a bezel, or who cracked the one they had.
Listed specs are a metal body, black finish, and 0.54 kg weight.
The package contains one bezel and one key, and the lock lets you physically discourage accidental contact with the power button and drive bays. Stated compatibility covers R510, R520, R720, R720xd, R730, R730xd, R820, and R830 — a broad sweep of 11th- through 13th-generation 2U PowerEdge chassis.
As captured on 14 September 2026, the Amazon rating is 4.7 out of 5 (94%) from just 5 reviews.
The score looks strong, but five reviews is not a meaningful sample. A single bad review would move that average significantly, so do not read 4.7 as proof of quality.
The rest of this article gives you criteria that do not depend on that thin sample.
Compatibility Guide
Officially listed models are below. The form factor is 2U only — it will not physically mount on 1U machines (R620, R630) or tower T-series chassis.
| Generation | Listed models | Notes |
|---|---|---|
| 11th gen | R510 | Many bay variants exist |
| 12th gen | R520 / R720 / R720xd | Most common on the used market |
| 13th gen | R730 / R730xd | Front layout close to R720 |
| 4-socket 2U | R820 / R830 | Same 2U chassis width |
Installation reuses the existing clips and screw holes — no modification or special tools. PowerEdge 2U bezels generally hook into receivers on the rack ears and snap in on the opposite side, so anyone who has removed a bezel before will manage without instructions (none are included).
Three failure modes account for most bad outcomes. First, the same model number can have different bezel shapes depending on bay configuration.
R720 vs R720xd and R730 vs R730xd ship in 8/12-bay 3.5-inch and 16/24-bay 2.5-inch layouts, and vent perforation and badge plate details vary.
Compare your actual chassis against the product photos before ordering. Second, key compatibility is explicitly not guaranteed — lock cylinders vary between units.
Since you replace the whole bezel this is usually moot, but a used chassis with a deformed receiver can bind. Third, clearance in the rack: the bezel protrudes roughly 20 mm, and racks with tight front doors sometimes will not close.
Also note this is not a cooling upgrade. Adding a mesh panel slightly increases intake restriction.
PowerEdge fan control absorbs that in practice, but do not expect lower temperatures from fitting a bezel.
Product Info
BestParts is a third-party PC and server accessory brand, and this part is positioned as an alternative to the genuine Dell bezel. The price was ￥7,713 including tax on Amazon.co.jp as captured on 17 September 2026.
That is a point-in-time figure and moves with stock and promotions, so check the listing for the current price. The eBay entry is a search link only, with no fixed price captured.
Published specs are: black, metal construction, 0.54 kg, one bezel plus one key, and compatibility with R510 / R520 / R720 / R720xd / R730 / R730xd / R820 / R830.
At 0.54 kg the weight is typical for a 2U bezel and supports the metal-frame claim rather than a plastic-only build — though it also means it has real heft in hand, so mind your grip when working inside a rack.
No manufacturer warranty period is stated. In practice your only recourse is the retailer's return policy, so test-fit the part as soon as it arrives and decide within the return window.
That single step matters more with third-party bezels than with almost any other server part.
Product Disclosure (Amazon)
- Manufacturer: BestParts
- Seller: Amazon US
- Fulfilled by: Amazon US
- ASIN: B094D9MF72
- Note: This article covers a manufacturer-made product based on Amazon listing details.
Alternatives Compared
There are essentially three ways to source a bezel, each with a different character.
| Option | Price | Availability | Fit certainty |
|---|---|---|---|
| Genuine Dell, new | High | Scarce on older generations | Highest |
| Third-party like this one | ￥7,713 at capture | Immediate if in stock | Requires photo matching |
| Used genuine bezel | Varies, often cheap | Wait for listings | Often missing keys, scuffed |
Where genuine new stock still exists, genuine wins on fit certainty. But for R510 and R720-era chassis, new genuine supply has thinned and used listings frequently arrive without keys or with the wrong badge plate.
The real value here is immediate availability plus an included key, not superior build quality. If you need the front tidied now and want the lock, this fits.
Conversely, if your organisation's asset rules require genuine Dell parts, third-party is off the table outright. Confirm that before raising a purchase request.
Where It Actually Helps
The benefit is not purely cosmetic. In a homelab, a locked bezel physically prevents two real accidents: someone bumping the front power button, and a cat or child catching a drive tray release latch.
Pulling a drive halfway out of a running PowerEdge triggers a RAID rebuild at best and drops a volume at worst. That is where the key earns its keep.
On dust, the mesh stops large lint, but it is not a filter — fine dust passes straight through. Do not stretch your internal cleaning interval because you fitted a bezel.
Best Use Cases
- Homelab owners running PowerEdge — ideal if your R720 or R730 is missing or has a cracked bezel. You get a tidy front and protection against accidental input.
- Used server buyers — second-hand PowerEdge units usually ship bezel-less and key-less. This solves both in one purchase.
- Anyone standardising a rack's appearance — mismatched bezels look untidy across multiple units, and this is cheaper than genuine in quantity.
- Racks in visible spaces — offices, studios, and streaming rooms benefit from a clean front face.
It is, however, useless for anyone chasing performance, cooling, or acoustics. It changes neither drive speed nor fan noise in any meaningful way.
It also will not fit non-Dell servers, 1U chassis, or tower models.
Purchase Notes
1. Do not trust the compatibility list alone — match photos. A listed model name means the part fits that model family, not every configuration of it.
PowerEdge 2U chassis vary by bay layout and front geometry changes with it. Photograph your server's face and compare vent and badge positions against the listing.
Skipping this is how people end up paying return shipping.
2. There are only 5 reviews. As of 14 September 2026 the rating is 4.7 of 5 (94%) across 5 reviews — statistically meaningless as a sample.
Ignore the star average and read whether any reviewer states which model they fitted. One report matching your exact configuration is worth more than the score.
3. Listing metadata can disagree with the actual product. Amazon pages for server spare parts frequently mix manufacturer, seller, and compatibility details across variants.
Confirm the target product from the images and title before ordering. The same caution applies to price: the ￥7,713 quoted here was captured on 17 September 2026.
4. Assume there is effectively no warranty. With no stated warranty period, anything beyond dead-on-arrival falls to the retailer's return policy.
Paint quality and lock smoothness may not match genuine parts. This suits buyers comfortable trading some finish quality for a few thousand yen.
5. Do not treat the lock as real security. A bezel lock of this class stops casual hands, not anyone with a tool.
If physical security is a genuine requirement, solve it with a locking rack and controlled placement.
6. Ignore the site category label. This article sits under "single board computer" on this site, but it is not an SBC — it is an external chassis part for rack servers.
Despite sharing a shelf with Raspberry Pi accessories, the use case is entirely unrelated.
FAQ
Q. Will it fit an R740 or R740xd? A.
R740 is not on the compatibility list. The 14th generation changed the front layout, so assume it will not fit.
If you try anyway, buy under returnable terms.
Q. Can I use it on a 1U R620 or R630?
A. No. This is a 2U-only part; 1U chassis differ in height and mounting.
Q. Will the key work with my server's existing lock? A.
You replace the whole bezel, so the included key matches the included bezel's cylinder. It is not intended to work with an existing genuine bezel, and the listing states key compatibility is not fully guaranteed.
Q. Do I need to power down to install it? A.
No, it fits while running. Just avoid pressing on the drive bay area, since your hands pass close to the tray release latches.
Q. Does it affect cooling or drive speed? A.
Practically no. Intake restriction rises slightly with one more mesh layer, which PowerEdge fan control absorbs.
Drive speed is unaffected.
Q. Is this an LCD bezel? A.
No LCD is listed in the specs. If you expect the LCD panel found on some higher-spec R720 configurations, verify from the product images.
