This article covers be quiet! ケースファン PURE WINGS 3 120mm PWM White REVERSE 3-pack 1.

Overview

The be quiet! PURE WINGS 3 120mm PWM White REVERSE 3-pack is a triple-fan set designed specifically for intake applications, featuring reverse-blade geometry that hides the frame crossbars when viewed from the intake side. With a maximum speed of 1,500 RPM, airflow of 47.1 CFM, and static pressure of 1.17 mmH2O, this mid-range fan strikes an excellent balance between quiet operation and cooling performance. The white blade and frame design blends seamlessly into white-themed PC builds. Engineered and quality-controlled in Germany, the PURE WINGS 3 uses rifle bearings rated for an average of 80,000 hours of continuous operation. PWM control allows the fan speed to adjust dynamically based on system load, keeping noise levels low during idle while delivering sufficient airflow under heavy loads. The reverse-blade design solves a common aesthetic problem: standard fans show their frame crossbars on the intake side, which can look cluttered. With the REVERSE variant, the clean side of the blades faces outward, making it ideal for side-panel or bottom intake positions where the fan is visible.

Compatibility Guide

This fan adheres to the standard 120mm form factor (120×120×25mm) and fits most PC case fan mounts, including radiator positions. It uses a standard 4-pin PWM connector that plugs directly into motherboard fan headers. While it can physically connect to 3-pin headers, PWM speed control will not function in that case. The 3-pack is perfect for front intake triple-fan setups or side/bottom intake configurations. However, because these are reverse-blade fans, they are not suitable for exhaust use. For exhaust positions, you will need the standard (non-reverse) PURE WINGS 3 fans.

Product Info

The be quiet! PURE WINGS 3 120mm PWM White REVERSE 3-pack launched in 2025 and sits in the mid-range segment, targeting users who prioritize a balance of quiet operation, cooling performance, and aesthetics. Key specifications include: Fan dimensions: 120×120×25 mm Max speed: 1,500 RPM Airflow: 47.1 CFM Static pressure: 1.17 mmH2O Noise level: 28.5 dBA Power draw: 3.84 W per fan Bearing: Rifle bearing (80,000 hours MTBF) Connector: 4-pin PWM * Color: White The product carries a standard 3-year manufacturer warranty and is available through major retailers including as an officially imported unit.

Best Use Cases

White-themed PC builds: The white fan blades and frame match white cases, motherboards, and cables perfectly. The reverse-blade design keeps the intake side clean and visually appealing, especially when mounted behind a mesh side panel. Quiet PC enthusiasts: With a maximum noise level of only 28.5 dBA and PWM control for near-silent idle operation, this fan is ideal for noise-sensitive environments like home offices or media centers. * Bulk intake upgrades: The 3-pack offers better value than buying individual fans, making it a cost-effective choice for replacing all front intake fans at once or populating a side/bottom intake array.

Things to Consider

These are reverse-blade fans designed exclusively for intake. They cannot be used for exhaust; you will need the standard PURE WINGS 3 (non-reverse) for exhaust positions. Plan your airflow direction carefully before purchasing. At 1,500 RPM max, these fans are adequate for most mid-range builds but may not provide enough static pressure for high-density radiators or heavily obstructed intake panels. For high-end liquid cooling or extreme airflow needs, consider be quiet!'s Silent Wings 4 series. The 3-pack is economical only if you need three fans. If you only need one or two, or require different sizes, the single-pack PURE WINGS 3 is a better choice.

Product Disclosure (Amazon)

  • Manufacturer: be quiet!
  • Seller: Amazon.co.jp
  • Fulfilled by: Amazon.co.jp
  • ASIN: B0FV3949RP
  • Note: This article covers a manufacturer-made product based on Amazon listing details.