Overview

ANTEC's C6 Curve Air is a pillarless mid-tower PC case that pairs curved tempered glass panels on both the front and the side. It belongs to the CONSTELLATION SERIES and is aimed at builders who want a clean, dress-up look without sacrificing airflow. The curved glass gives the case a distinctive silhouette that stands out from typical flat-panel towers.
The case supports ATX motherboards and is compatible with back-connector boards, letting you route power from the rear of the tray. That means the visible side stays nearly cable-free apart from the GPU power cables, which helps both airflow and aesthetics. Two PSU shroud fans are included to blow air directly toward the graphics card, and the case can hold up to six 120mm fans in total.
Cooling capacity is generous for the class: a 360mm radiator fits at the top, expansion card clearance reaches 450mm, and CPU cooler height is supported up to 180mm. With dimensions of 480 x 235 x 470 mm and a weight of 9.12 kg, it sits in the mid-tower range and targets users who want a showpiece build with solid thermals.

Compatibility Guide

The C6 Curve Air is built around the ATX form factor as a mid-tower case. It also supports motherboards with rear connectors, so if you own a back-connector board, you can keep the front of the case nearly free of wiring. That is a meaningful advantage for tidy builds.
Front I/O includes USB 3.0 x2, one Type-C 3.2 Gen2 port, and audio in/out. Storage is limited to one 2.5-inch bay and one 3.5-inch bay, which is enough for a single SSD plus a single HDD but not for heavy multi-drive setups.
Expansion card clearance is up to 450mm, and CPU cooler height is supported up to 180mm, so most high-end GPUs and tower coolers will fit. A 360mm radiator can be mounted at the top for large AIO liquid coolers. Note that vertical GPU mounting is not supported out of the box; a separately sold bracket is required.

Product Info

The C6 Curve Air was released on May 16, 2026. Its dimensions are 480 x 235 x 470 mm, and it weighs 9.12 kg. The price point is approachable for a curved-glass mid-tower, making it an attractive option for builders on a moderate budget.
In the market, this case sits between entry and mid tier, offering curved glass aesthetics plus practical cooling features like PSU shroud fans and support for up to six 120mm fans. Removable dust filters on the front and bottom make maintenance straightforward, and the front-top panel groups the power button, USB ports, and audio jacks for everyday convenience.

Best Use Cases

  • Builders who want a showpiece PC with curved glass on the front and side. The pillarless design and curved panels create a distinctive look, and the near-cable-free interior keeps the view clean. Not ideal for anyone who prefers a plain, function-only chassis.
  • Users with a back-connector motherboard. Rear power routing keeps the visible side tidy and improves airflow. If your board lacks rear connectors, you will not gain this benefit.
  • Enthusiasts planning a high-end cooling setup. With a 360mm radiator at the top and up to six 120mm fans, there is room for serious CPU and GPU cooling. For a simple office build, this level of cooling is overkill.

Things to Consider

The case is a mid-tower, so it takes up a fair amount of desk or floor space. At 480 x 235 x 470 mm and 9.12 kg, it is also fairly heavy, so check your setup location before committing.
Vertical GPU mounting is not supported without a separately sold bracket. If you plan a vertical GPU layout, factor in the extra cost and confirm bracket availability ahead of time.
Storage capacity is modest at one 2.5-inch bay and one 3.5-inch bay. Users who need many drives should look at cases with more bays, since this chassis is better suited to a single SSD plus a single HDD.

FAQ

Q: Can I install a MicroATX or Mini-ITX motherboard in this case?
A: The provided information lists ATX support only. Compatibility with smaller form factors is not stated, so check the official specifications before purchasing.
Q: Where can I mount a 360mm radiator?
A: The top of the case supports a radiator up to 360mm, which is ideal for large AIO liquid coolers.
Q: Does the case support vertical GPU mounting?
A: Not out of the box. A separately sold bracket is required, so confirm availability if you plan a vertical GPU setup.

Product Disclosure (Amazon)

  • Manufacturer: Antec
  • Brand: ANTEC
  • Model: C6 Curve Air
  • ASIN: B0GR8N1GY9
  • Note: This article covers a manufacturer-made product based on Amazon listing details.