Overview
The Anker HDMI 2.1 Cable 6.6 ft B2C - UN Black Iteration 1, sold under the model number AMZ-A8743, is an Ultra High Speed HDMI cable built around a 48Gbps pipeline. That headroom lets a single cable carry 8K at 60Hz or 4K at 120Hz, which makes it a natural fit for a current-generation console parked in front of a large TV. Anker positions it squarely at gamers who want the display chain to stop being the weak link.
The jacket is braided nylon, the connector shells use carbon steel, and the pins are gold-plated, with the company citing durability across roughly 10,000 insertions. DynamicHDR support means the cable can pass through content where brightness and contrast are tuned scene by scene or frame by frame. It is, of course, still just a conduit: the resolution and refresh rate you actually see are set by the weakest device in the chain.
Connectivity & Compatibility
The cable carries Ultra High Speed HDMI Cable certification and supports the HDMI 2.1 specification. It also works with older standards including HDMI 2.0b, 2.0a, 2.0, 1.4, 1.3, 1.2 and 1.1, negotiating down to whatever the connected hardware can handle.
- Rated for 8K at 60Hz and 4K at 120Hz, with a maximum data rate of 48Gbps.
- Reaching 4K at 120Hz requires a display that itself supports 4K at 120Hz.
- DynamicHDR pass-through lets HDR content use the tone mapping your display supports.
- Designed with consoles such as the PS5 and Xbox Series X / S in mind.
At 2 m, the run leaves enough slack for cable management behind a TV stand or across a desk. The catch is the usual one for high-bandwidth HDMI: every link in the chain, from console to receiver to display, has to support the target format. If any one of them tops out lower, the whole link falls back to that ceiling.
Product Info
Pricing sits in the entry-to-mid range for HDMI cables, which is reasonable given the certification, braided jacket and gold-plated pins. It occupies the space between no-name budget cables and premium fiber-optic runs, and for a typical living-room setup it is the sensible middle ground. Buyers who only need a short 1080p link will find it more cable than they need, while anyone chasing 4K120 from a console will appreciate having the bandwidth question settled.
Best Use Cases
- Console owners running a PS5 or Xbox Series X / S into a 4K TV: the certified 48Gbps path lets the console output at its ceiling, though 8K viewing still depends on the TV.
- Desk setups pairing a PC with a high-refresh monitor: one cable covers 4K at 120Hz when the monitor supports it, and offers little benefit if it does not.
- People tidying up a TV rack: the braided jacket and 2 m length handle routing well, but short in-cabinet runs make it overkill.
Product Disclosure (Amazon)
- Manufacturer: Anker
- Model: AMZ-A8743
- ASIN: B08N5VG7WC
- Note: This article covers a manufacturer-made product based on Amazon listing details.





