Overview
Hongmo's tempered glass screen protector for the REDMAGIC 11S Pro is a two-pack cut specifically for this gaming phone. It uses AGC glass, carries a 9H surface hardness rating, has a glossy finish, and adds an oleophobic coating plus anti-shatter treatment.
The short verdict: this is a cheap, replaceable consumable, not the protector you settle on if optical quality and glare control matter to you.
Pricing captured on Amazon's Japan store was ¥855 as of 27 August 2026, and ¥900 as of 20 July 2026. With two sheets in the box that works out to roughly ¥400-450 per sheet, and the practical benefit of that price is simple: botching one installation costs almost nothing.
Prices in this bracket move constantly, so treat these figures as snapshots and check the product page for the current amount.
As of 21 July 2026 the listing showed 4,667 reviews at 4.0 out of 5 stars (an 80% score).
That is an ordinary result for a glass protector - it works when installed properly, but a meaningful minority report unit variance or cutout alignment complaints. Do not buy expecting a near-perfect product.
Compatibility Guide
This protector fits the REDMAGIC 11S Pro only. The manufacturer's compatibility note explicitly states it is not compatible with other devices, and even within the REDMAGIC line, screen size and cutout positions change between generations and between base and Pro variants.
Unlike cases, a two-millimeter mismatch on a glass protector is fatal.
The listed dimensions of 18 x 11 cm are almost certainly package or outer dimensions rather than the glass itself. A 6-7 inch phone display is roughly 15 cm tall and 7 cm wide, so an 11 cm width is far too large for the panel.
Do not use that figure to conclude the sheet might fit another handset.
Case interference is the most common real-world failure. Full-coverage glass extends close to the edges, so a case with a raised inner lip can press the perimeter and cause lifting or peeling.
On a thick, fan-equipped device like a REDMAGIC, confirm how your case sits before committing. If you are buying glass and a case together, apply the glass first, verify adhesion, then fit the case.
The other thing to check is the in-display fingerprint sensor. Most current gaming phones use one, and adding a layer of glass can reduce recognition accuracy.
Re-enrolling your fingerprints after installation usually fixes it. Because behavior differs between optical and ultrasonic sensors, confirm the stated compatibility on the product page.
Product Info
| Item | Value |
|---|---|
| Hardness | 9H |
| Material | Tempered glass (AGC glass) |
| Dimensions | 18 x 11 cm |
| Quantity | 2 sheets |
| Finish | Glossy |
| Compatible device | REDMAGIC 11S Pro |
The package includes two glass sheets plus installation aids such as a cleaning cloth and dust-removal stickers. Warranty handling varies by seller, so check the listing if that matters to you.
On price, two captures exist: ¥855 on 27 August 2026 and ¥900 on 20 July 2026. A swing of tens of yen within a month is normal for a consumable at this tier, where sales and coupons move the number regularly.
Installation Tips
Satisfaction with any glass protector depends more on the install than on the product. Pick a low-dust environment - a bathroom shortly after the steam clears, or a settled room late at night.
Avoid working in front of an air conditioner vent or right after changing clothes.
Follow the order: wipe with the supplied wet cloth to remove oils, dry-wipe, then lift remaining particles with the dust stickers. Grit hides in the four corners and around the speaker slit, so angle the screen against a bright light and inspect.
A single leftover particle creates a bubble that never goes away.
Align before fully removing the release liner. Use the top cutout as your reference, hold the sheet in place, pull the liner out, and let the center touch down first so the adhesive pulls itself flat.
Small air bubbles can be pushed outward through a cloth, but dust-caused bubbles will not clear. When that happens, switch to the second sheet - that is exactly what the two-pack is for.
Comparison With Other Types
| Type | Strength | Weakness |
|---|---|---|
| Glossy glass (this product) | High clarity, light finger glide | Strong reflections from lights and sun |
| Anti-glare / matte | Less reflection, hides fingerprints | Slightly hazy image |
| Privacy filter | Blocks side viewing angles | Dimmer even head-on |
| TPU film | Conforms to curves, will not shatter | Scratches easily, less rigid |
This product is the first row. If you want the panel's colors unmuted and the lightest possible finger glide for gaming, it fits.
If you use the phone outdoors a lot or are bothered by overhead lighting reflections, a matte protector at the same price will make you happier. Privacy filters exist too, but the brightness loss makes them a poor match for gaming.
Best Use Cases
- Owners who carry the REDMAGIC 11S Pro without a case - dedicated cutouts, full front coverage, and 9H-rated resistance to keys and coins.
- Heavy mobile gamers - the oleophobic layer keeps skin oils from building up and keeps swipes light, while the glossy finish leaves color reproduction intact.
- First-time installers - two sheets means one failed attempt is not the end of it. That margin for error is the real value here.
- Anyone who just needs coverage from day one - under ¥1,000 makes it a reasonable stopgap while you research a pricier protector.
Before You Buy
9H is not a drop-resistance rating. It is a pencil-hardness scratch metric, unrelated to Mohs 9.
Quartz sand sits around Mohs 7, so pocket grit can still leave fine lines. A glass protector also works by sacrificing itself; a corner-first drop can still crack the panel underneath, so pair it with a case or bumper.
Glare is stronger than you expect. Room lights reflect off the surface, and in dark game scenes you will see yourself.
If outdoor visibility or eye fatigue matters, this finish is the wrong choice - no price can fix that.
Read the review count carefully. 4,667 reviews is a lot for an accessory tied to a recent phone.
Amazon frequently merges multiple device variants onto one listing and pools their reviews, so not all of that feedback necessarily refers to the REDMAGIC 11S Pro version. Prioritize reviews that name the model.
Listing metadata can disagree with reality. One captured price entry is labeled "Amazon US" while carrying a yen amount, which shows how inconsistent this data can be.
For protectors, where the wrong model is a total loss, trust the product images and the device name in the title over store labels or category tags, and double-check the variant dropdown before ordering.
No curved displays, no cross-model reuse. Being device-specific means exactly that.
If you plan to change phones soon, factor in that the second sheet may go unused.
FAQ
Q. Does the in-display fingerprint reader still work? A.
Usually yes, though accuracy can drop slightly. Re-enrolling your fingerprints after installation typically resolves it.
Confirm stated support on the product page first.
Q. Does full coverage mean it adheres all the way to the edge? A.
It covers the display area, but the outermost perimeter can lift slightly depending on the phone's edge profile. If you use a case, check that its lip is not pressing the border.
Q. Do I need to use both sheets? A.
No. Apply one and keep the second as a replacement.
Store the spare away from heat, such as a hot car interior.
Q. A bubble will not go away. A.
Small bubbles can settle within a day, but bubbles caused by trapped dust will not. Lift the sheet with tape, remove the particle, and reapply - or switch to the second sheet.
Q. What does it cost? A.
¥855 as of 27 August 2026 and ¥900 as of 20 July 2026 on Amazon's Japan store. Prices at this tier change often, so check the listing for the current figure.
Product Disclosure (Amazon)
- Manufacturer: Hongmo
- Seller: chuanbo98
- Fulfilled by: Amazon
- ASIN: B0H6Z57GF4
- Note: This article covers a manufacturer-made product based on Amazon listing details.
