This article covers Thermalright BA120 CPUエアクーラー 6本のヒートパイプ TL-C12C PWM 静音ファン CPUクーラー S-FDBベアリング付き AM4 AM5.

Overview

The Cable Matters SATA III Cable 3-Pack with Locking Latch is a reliable, no-nonsense solution for connecting SATA storage drives in your desktop PC or NAS. Each cable supports SATA III speeds up to 6Gbps and is fully backward-compatible with SATA II and SATA I devices. At 18 inches per cable, they are long enough to reach drives in most mid-tower cases without excessive slack. The standout feature is the locking latch on each connector, which prevents accidental disconnection once the cable is plugged in. This makes the pack especially useful for hot-swap bays, external docking stations, or any setup where cables might get jostled.

Connectivity & Compatibility

Connectors are standard 7-pin SATA, compatible with 2.5-inch SSDs/HDDs, 3.5-inch HDDs, optical drives, and any device using the SATA interface. The cables are rated for SATA III (6Gbps) but work fine with older SATA II (3Gbps) and SATA I (1.5Gbps) ports. Signal integrity is maintained by internal shielding, reducing crosstalk and interference. They can be used in internal PC builds, external hot-swap enclosures, NAS units, and even SATA-based optical drives. The locking mechanism adds physical security in environments prone to vibration or frequent drive swapping.

Product Info

Released around 2020, the 3-pack has become a staple among PC builders. Pricing on Japan is typically around ¥1,000, making it an excellent value at about ¥333 per cable. The manufacturer backs it with a lifetime warranty — if a cable fails due to material or workmanship defects, you can request a replacement. The pack includes three cables and nothing else. Market position is solidly mid-range: not the cheapest, but the locking latch and warranty justify the slight premium over generic no-name cables.

Best Use Cases

① DIY PC builders: When you're assembling your first rig, the locking latch helps ensure your drive is reliably connected. The modest price means you can keep spares on hand. However, if you're obsessed with cable routing, you may want a variety of lengths — this pack only offers one length. ② Users with hot-swap drive bays: If you frequently swap drives in a dock or removable rack, a locked connection prevents accidental unplugging. The latch holds firm even during insertion/removal of the tray. On the downside, unlatching takes a bit of finger pressure, which might be inconvenient for rapid swaps. ③ NAS enthusiasts: Inside a multi-bay NAS, cables can loosen over time due to vibration or temperature changes. The locking latch keeps them secure. But measure the distance from motherboard SATA ports to your drive cages — 18 inches may be too short for large tower cases or too long for compact enclosures. ## Alternatives
StarTech offers a similar SATA III cable (without latch) at a comparable price. Without the latch, StarTech connectors are slightly narrower, making it easier to plug into tightly spaced ports. Basics SATA cables are even cheaper but similarly lack a latch. If you value quick, tool-less swaps and don't need the locking feature, those alternatives are worth considering. For maximum reliability in a fixed configuration, the Cable Matters pack's locking latch gives extra peace of mind.

Things to Consider

The locking latch adds physical bulk to the connector. On motherboards with side-by-side SATA ports, you may find that two latched connectors cannot both fit into adjacent ports — you might need to skip one port or use a non-latched cable in between. Also, the 18-inch length is a single size; if your case requires shorter or longer runs, you'll need additional cables. Finally, the latch requires a deliberate push to release; if you frequently swap drives, the extra step can become annoying. For a one-time build or a stationary NAS, however, it's a minor trade-off for a secure connection.

Product Disclosure (Amazon)

  • Manufacturer: GIGABYTE
  • Seller: イーストスクエア
  • Fulfilled by: Amazon
  • ASIN: B09RSW3YV9
  • Note: This article covers a manufacturer-made product based on Amazon listing details.