# Transcend 825S M.2 SATA SSD 500GB: Slot Compatibility and Who Should Skip It

> Transcend 825S 500GB M.2 SATA SSD: 530/480MB/s, why NVMe-only slots won't detect it, and checks to make before you buy.

Tags: ssd, sata, m2, m2-2280, transcend, laptop-upgrade
Source: https://www.amazon.co.jp/dp/B0BF5XZBKJ
Article page: https://web-autoai.com/articles/transcend-ssd-825s-m2-500gb-ata-iii-3d-nand?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview

The Transcend SSD 825S M.2 500GB — SATA III internal M.2 solid state drive is an M.2 2280 internal SSD sold through Transcend Japan. It connects over SATA III (6Gbps), not NVMe. Rated sequential speeds are 530MB/s read and 480MB/s write, and it uses 3D NAND flash. Capacity is 500GB.

The short verdict: the 825S is for people who want a cheap way to speed up or extend the life of a slightly older PC whose M.2 slot supports SATA. Coming from a hard drive, boot times and app launches improve dramatically. Against modern NVMe drives, however, its sequential throughput is only a fraction as fast.

Most importantly, **it will not work in an NVMe-only M.2 slot. ** Nearly everything you need to check before buying comes down to that one point. For that reason, this article spends more time on how to tell whether your PC can use it than on the spec sheet.

## Compatibility Guide

The first thing to understand is that M.2 names a physical shape, not a connection type. An M.2 slot may support SATA only, NVMe (PCIe) only, or both. Because the 825S is a SATA III drive, **the slot must support SATA mode.

| Check | What the 825S needs | Common mistake |
|---|---|---|
| Interface | M.2 slot supports SATA | Installed in an NVMe-only slot; nothing shows up in BIOS |
| Length | Room and a mount for 2280 (22mm x 80mm) | Small laptops that only fit 2242 / 2230 |
| Key notch | Key compatible with SATA M.2 | Fits physically but is not detected |
| Shared SATA lanes | Check the manual for slot limitations | Using the M.2 slot disables a SATA port, so an existing HDD seems to vanish |
| BIOS setting | SATA mode set to AHCI | Left in RAID mode; the OS installer cannot see the drive |

The most common misconception is 'if it fits, it works. ' M.2 SATA drives usually have both B and M key notches (B+M key), so they physically slide into M-key NVMe-only slots too. Fitting and being detected are two different things.

For laptops, check the storage section of the manufacturer's spec sheet or service manual. Wording such as 'M.2 2280 SATA' or 'PCIe NVMe / SATA' means the slot is a candidate, while 'PCIe NVMe' alone means it will not work. To see whether your current drive is SATA, check the transfer mode in a tool such as CrystalDiskInfo. If a SATA M.2 drive is already installed, the 825S will very likely work in the same slot.

For desktops, check the per-slot table in your motherboard manual. Even boards with several M.2 slots often support SATA on only some of them. On some boards, running an M.2 slot in SATA mode also disables a SATA port that shares its bandwidth. If you plan to keep existing 2.5-inch drives connected, find out which port gets disabled first.

The data lists a recommended 300W power supply, but that is a generic whole-system figure. A SATA SSD draws very little power, so you will almost never need a new PSU because of the 825S.

## SATA vs NVMe: Where You Actually Feel the Difference

The 825S's 530MB/s read is close to the practical ceiling of SATA III (roughly 550MB/s). NVMe drives commonly reach about 3,000MB/s on PCIe 3.0 and about 7,000MB/s on PCIe 4.0. On paper the gap is huge, but you only feel it in certain situations.

| Use | Experience on the 825S | Gap vs NVMe |
|---|---|---|
| Booting, browsing, office work | Dramatically faster than an HDD | Hard to notice |
| Game loading | Fine for most titles | Usually small |
| Copying tens of GB | You wait minutes | Clearly noticeable |
| Video editing scratch disk | Becomes a bottleneck with lots of 4K footage | Large |

In other words, most everyday responsiveness comes from the jump from HDD to SSD. The difference between SATA and NVMe matters mainly when you move large files often. If you just want to keep an older laptop going, the 825S's speed is unlikely to hold you back.

## Product Info

The specification data provided is as follows.

| Item | Value |
|---|---|
| Capacity | 500GB |
| Interface | SATA III (6Gbps) |
| Form factor | M.2 2280 |
| NAND type | 3D NAND |
| Sequential read | 530MB/s |
| Sequential write | 480MB/s |

A 530MB/s read speed is typical for a SATA SSD. The 480MB/s write speed is a bit lower, but you will rarely notice it in daily use. Both figures are rated sequential speeds, and copying many small files will normally run slower than this.

Endurance (TBW), whether the drive has a DRAM cache, and random performance are not included in the data. The warranty is not listed either, and terms can vary by sales channel, so confirm it on the product page. M.2 SATA drives generally run cool and are commonly used without a heatsink.

co. That is a small sample, so treat the rating as a rough indication only. Prices change often, so check the product page for the current price (the Things to Consider section explains why no price is listed here).

## Installation Tips

1. **Confirm compatibility.** At minimum, check the interface and length rows in the table above.
2. **Choose a migration method.** Either reinstall the OS cleanly or clone your current drive. Cloning requires the data on your old drive to fit within 500GB.
3. **Check for the mounting screw.** M.2 drives are secured by a small screw at the end of the slot, and some laptops and motherboards ship without one or have lost it. It is better to find out before you start.
4. **Initialize the drive.** A new drive added as secondary storage will not appear in File Explorer until you initialize it and create a partition in Disk Management. Check this before assuming the drive is not detected.

Transcend offers a management utility called SSD Scope for its SSDs, which can be used to check drive health. Confirm which features, including cloning, are supported on the product page.

## Best Use Cases

- **Reviving an older laptop with a SATA-capable M.2 slot:** Replacing an HDD or a small SSD brings a clearly noticeable improvement in boot and app launch times.
- **Adding cable-free storage to a desktop:** Unlike a 2.5-inch drive, it needs no power or SATA cable, which keeps the case tidy.
- **Office work, browsing, and media playback:** In these tasks, the difference between SATA and NVMe is barely noticeable.
- **Upgrading capacity from an existing SATA M.2 drive:** A straight swap into the same slot is very likely to work.

It is **not** a good fit if your PC has only NVMe slots, if you regularly work with large video or photo files, or if you want to keep many large games installed.

## Things to Consider

**It does not work in NVMe-only slots. ** This is worth repeating because it is the biggest trap. Many laptops from recent years have NVMe-only slots, so assuming a newer PC is fine often leads you in the wrong direction. If you cannot find SATA support in the spec sheet, it is safer not to buy.

**If your slot supports both, compare NVMe drives too. ** With a dual-mode slot, there is little reason to choose SATA, because NVMe drives usually offer better value for their speed. The 825S makes the most sense in PCs whose slot supports only SATA.

**Think concretely about 500GB. ** It is plenty for Windows and everyday apps. Some large games exceed 100GB each, though, so a few titles can fill it. Keeping an SSD nearly full is also bad for performance and longevity, so leave yourself some headroom.

**Do not confuse it with mSATA or 2.5-inch SSDs. ** mSATA is an older, different form factor, and the 825S will not fit. If your PC has only a 2.5-inch bay, you need a 2.5-inch SATA SSD instead, which performs about the same.

**The collected price data was inconsistent. ** The automatically collected pricing for this article included amounts clearly out of line for a 500GB SATA SSD. The price field labeled 'Amazon US' also pointed to the Japanese Amazon page, which suggests a mix-up. To avoid publishing a wrong figure, no price is listed here. Listings sometimes show other capacities or products together, so when buying, use the images and title to confirm all four points: '825S', '500GB', 'M.2 2280', and 'SATA'.

## FAQ

**Q. Will it run faster in an NVMe-capable M.2 slot? **
A. No. A SATA drive runs at SATA speed in any slot. In an NVMe-only slot, it will not be detected at all.

**Q. Can I use it in a PC with an mSATA slot? **
A. No. mSATA and M.2 have different shapes and connectors.

**Q. Can I use it as PS5 expansion storage? **
A. No. The PS5's M.2 expansion slot is designed for PCIe 4.0 NVMe SSDs, so a SATA drive like the 825S is not supported.

**Q. Does it need a heatsink? **
A. SATA M.2 drives run cool and generally do not need one. Adding a motherboard heatsink is fine, but in a laptop the extra thickness can stop the bottom cover from closing.

**Q. Is it good for gaming? **
A. For most titles, load times are only slightly slower than on NVMe. Capacity is the bigger issue, since a few large games can fill 500GB.

### Product Disclosure (Amazon)
- Manufacturer: トランセンドジャパン
- ASIN: B0BF5XZBKJ
- Note: This article covers a manufacturer-made product based on Amazon listing details.
