# Thermaltake SWAFAN EX14 ARGB White 3-Pack Review: Daisy-Chain Limits & Fit

> 140mm ARGB 3-pack rated 139 m³/h / 3.17 mmH2O. Why 3 fans per chain is the safe limit, header current math, and who should skip it.

Tags: case-fan, 140mm, argb, magnetic-daisy-chain, thermaltake, white-build, pwm-fan
Source: https://www.amazon.co.jp/dp/B0CBYZHRZ3
Article page: https://web-autoai.com/articles/thermaltake-swafan-ex14-argb-white-tt-premium-edition-3?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview

The Thermaltake SWAFAN EX14 ARGB White TT Premium Edition — 140mm ARGB Magnetic Daisy-Chain Fan 3-Pack is a white set of three 140mm ARGB case fans. It's a strong choice if your case has 140mm mounts and you want an all-white lit build with less cabling. It's a poor fit if quiet operation matters most, or if your case only takes 120mm fans.

The model number is CL-F170-PL14SW-A (FN2007), in a white premium finish. Its main feature is magnetic daisy-chaining: adjacent fans snap together and pass both power and signal through the joint, so far fewer cables run back to the motherboard. The second feature is the included reversible blades. Swap them in and the fan changes from intake to exhaust without turning the frame around.

As of May 2026, the Amazon. co. That's not a large sample, but the rating is consistently high.

## What the Spec Numbers Tell You

| Item | Value | What it means |
|---|---|---|
| Speed | 500-2,000 RPM | Can slow down to 500 RPM, so light use can be quiet |
| Max airflow | 139 m³/h | Plenty for a 140mm fan; good for front intake |
| Max static pressure | 3.17 mmH2O | Fairly high; airflow holds up through mesh or a radiator |
| Noise | 38.8 dBA | Measured at full speed; not a silent fan when maxed |
| LEDs | 20 (6 inner, 14 outer) | Two-ring design with a large lit area |

Because both airflow and static pressure are fairly high, you don't have to choose between an airflow fan and a pressure fan. One model can handle front intake and radiator duty.

The 38.8 dBA figure is measured at the full 2,000 RPM, and at that speed you'll hear it. Plan to run the fans slower with PWM most of the time and let them speed up only under load.

## Compatibility Guide

**Mounting**: Each fan measures 140 x 140 x 25mm and fits any 140mm fan mount. 140mm fans normally use 124.5mm hole spacing, not the 105mm spacing of 120mm fans, so they won't fit 120mm-only mounts. Check your case specs to see how many 140mm positions it has.

**Thickness and clearance**: At a standard 25mm thick, top-mounted fans can still hit VRM heatsinks or tall memory modules. If you mount the fans on a radiator, check clearance using the radiator and fan thickness combined.

**Connectors**: Fan speed runs through a 4-pin PWM connector (12V), and lighting runs through a 3-pin ARGB connector (5V). You need an ARGB-capable motherboard or controller. Plugging a 5V 3-pin ARGB cable into a 12V 4-pin RGB header can damage the LEDs. The headers look similar but are not the same, so check your motherboard labels before connecting. You can also skip the magnetic chain and wire each fan separately.

**Chain length**: Thermaltake recommends no more than three fans per magnetic chain. Five will work, but the lighting can become unstable. The next section explains why, using the rated current.

## How Many Fans per Chain? A Rated-Current Check

The listed ratings are 12V at 0.32A for the fan and 5V at 0.72A for the lighting.

| Fans chained | Fan side (12V) | ARGB side (5V) |
|---|---|---|
| 1 | 0.32A | 0.72A |
| 3 | 0.96A | 2.16A |
| 5 | 1.60A | 3.60A |

As a rough guide, many motherboard fan headers are limited to about 1A, and many ARGB headers to about 3A (15W). Limits vary by board, so check your manual.

Three fans stay within both limits, but five go over both. That margin is probably why Thermaltake recommends three. Rated values are upper bounds and real draw is usually lower, but it's safer to plan with headroom.

For four or more fans, split them into two chains on separate headers, or use a fan hub or ARGB controller. If you buy two 3-packs for six fans, two chains of three is the safe setup.

## Product Info

The SWAFAN EX14 ARGB White TT Premium Edition launched in late 2023 and sits in the upper-mid range of case fans. Units bought through authorized channels come with a 2-year warranty. Terms can vary by retailer, so confirm them on the listing before you buy.

As of May 26, 2026, Amazon. co. Prices change often with sales and stock, so check the listing for the current price. The eBay link is only a search page, and no price was captured from it.

The box includes spare reversible blades and bearing lubricant, so blade swaps and long-term maintenance are covered. Each fan has 20 LEDs, 6 on the inner ring and 14 on the outer ring.

## Practical Tips

**Set a fan curve**: You don't need to run the fans at 38.8 dBA all the time. In the BIOS or your motherboard utility, keep them around 500-800 RPM at low temperatures and ramp up only when CPU or GPU temperatures rise. That keeps everyday use quiet.

**Decide where all three fans will go**: Some cases fit only two 140mm fans in the front, so the third ends up on the top or rear. The magnetic chain only links fans mounted side by side, so plan on wiring any separated fan on its own.

**Switching airflow direction**: The reversible blades leave the frame orientation unchanged. In practice, that means you can line up intake and exhaust rows without breaking the chain. Turn the power off before swapping blades.

## Best Use Cases

- **Builders who want tidy cabling**: Up to three fans can run back to the motherboard on a single connection.
- **All-white RGB builds**: The white frame and 20 LEDs on two rings make these fans a visual centerpiece.
- **Cases with two or three 140mm mounts in a row**: This layout gets the most out of the magnetic chain.
- **Anyone who may change the intake/exhaust layout later**: Swapping blades avoids buying new fans.

## Things to Consider

**Plan on three fans per chain**: As the current math shows, chaining five fans exceeds typical fan and ARGB header limits. The usual symptom is unstable lighting. If you're filling many mounts, plan on a hub or controller from the start.

**Not quiet at full speed**: 38.8 dBA at maximum is loud compared with fans sold as silent. If you want a near-silent PC even under load, keep the fan curve conservative or choose a quieter fan.

**140mm only**: Hole spacing differs from 120mm, so these fans won't fit 120mm mounts without an adapter. The series also has a 120mm model with a very similar name, so confirm the model number CL-F170-PL14SW-A and the 140mm size before ordering.

**Can you use all three? **: If your case has only two 140mm mounts, one fan will sit unused and you lose half the benefit of the chain. Count your mounts first.

**Color and upkeep**: White frames show dust easily, so cleaning them along with your case filters keeps them looking good. If white doesn't match your build, a black version is also available.

## FAQ

**Q. Can I mount these in 120mm fan slots? **
A. No. They are 140mm only, and the hole spacing differs from 120mm. Check your case for 140mm mounts.

**Q. How many fans can I daisy-chain? **
A. Thermaltake recommends up to three. For four or more, a hub or controller is safer.

**Q. How do I switch between intake and exhaust? **
A. Install the included reversible blades. Airflow reverses while the frame orientation stays the same, so the chain layout is preserved.

**Q. What if my motherboard has no ARGB header? **
A. You'll need a separate ARGB controller for the lighting. Fan speed control works on any 4-pin PWM header.

**Q. Are they suitable for radiators? **
A. Yes. They fit 140mm-format radiators, and the 3.17 mmH2O static pressure is fairly high. Check case clearance using the radiator and fan thickness combined.

### Product Disclosure (Amazon)
- Manufacturer: Thermaltake
- ASIN: B0CBYZHRZ3
- Note: This article covers a manufacturer-made product based on Amazon listing details.
