# Thermalright AXP 90 X 47 White — 47mm Low-Profile Down-Draft CPU Cooler > Thermalright AXP 90 X 47 White summary. A down-draft CPU air cooler held to 47mm total height, with four 6mm AGHP heat pipes and a 92mm PWM fan. Supports LGA 1150/1151/1155/1156/1200 and AM4. Tags: cpu_fan, thermalright, axp90-x47, low-profile, itx Source: https://www.amazon.co.jp/dp/B09PHH3HR3 Article page: https://web-autoai.com/articles/thermalright-axp-90-x-47-white-47mm-low-profile-down-draft?lang=en Prices and ratings change over time — check the article page for the current values. --- ## Overview Thermalright is a Taiwanese cooling brand with more than two decades of history, known for CPU air coolers and case fans that balance price against performance. The AXP 90 X 47 White sits in that lineup as a down-draft cooler held to a total height of just 47mm. The heatsink measures 94.5 (L) x 95 (W) x 47 (H) mm including the fan, with a 92mm fan mounted on top. Cooling comes from four 6mm AGHP heat pipes. The U-shaped copper pipes pull heat off the CPU and pass it into a stack of pure aluminum fins, whose spacing was tuned through extensive iteration to move heat out of a very small volume. The obvious use case is a slim or Mini-ITX build where a tower cooler simply will not fit. Because the down-draft body sits low over the motherboard, it tends to clear side panels and top-mounted hardware that a tall tower would hit. The all-white finish also suits white-themed builds. Positioned as an entry-level option, it prioritizes dimensions and price over raw cooling headroom. ## Compatibility Guide The supported sockets are Intel LGA 1150, LGA 1151, LGA 1155, LGA 1156 and LGA 1200, plus AMD AM4. LGA 1700 and AM5 are not covered, so anyone on a current-generation platform needs a different cooler. Mounting uses an all-metal dual-platform fastener set together with a backplate, a design aimed at a firm, stable hold. The fan connects through a 4-pin header and supports PWM speed control. Because this is a down-draft design only 47mm tall, the heatsink covers a broad area above the motherboard. Check clearance against tall memory heatspreaders and against large VRM heatsinks near the socket before committing, since those are the parts most likely to interfere. ## Product Info Check the retailer's page for the latest price. Sales run mainly through online channels such as online retailers. In the market it reads less as a high-performance tower and more as a practical part for height-constrained cases. Competing low-profile coolers exist at similar prices, but the white finish and backplate-equipped fastener set are what set this one apart. ## Best Use Cases * Builders squeezing a cooler into a slim or Mini-ITX chassis: the 47mm total height fits where a tower cannot, though LGA 1700 and AM5 owners must look elsewhere. * Anyone assembling a white-themed interior: the all-white heatsink and fan keep the color scheme consistent, but this is not the pick for maximum cooling headroom. ## Things to Consider Socket coverage is the first thing to verify. Support stops at LGA 1150/1151/1155/1156/1200 and AM4, so an LGA 1700 or AM5 board cannot mount this cooler at all. On cooling capacity, the low-profile down-draft layout is not built for quietly taming a high-power CPU. Pair it with a hot chip and the fan will likely sit at high RPM, which works against the low noise rating. Small, efficient CPUs are the realistic match. Down-draft airflow does help cool the area around the socket, including VRM and memory, but the flip side is a heatsink body that can collide with nearby components. Measuring clearance before assembly avoids surprises. ## FAQ Q: Can I install this on an LGA 1700 CPU? A: No. Supported sockets are LGA 1150, 1151, 1155, 1156, 1200 and AM4, so LGA 1700 is out of scope. Q: Is the included fan replaceable? A: The fan is a 92 x 92 x 15mm slim unit with a 4-pin PWM connection. A fan of the same dimensions could be swapped in, but a thicker fan changes the overall height. Q: How does it compare with a tower cooler? A: This is a 47mm low-profile design combining four heat pipes with a 92mm fan. It will not match a large tower, but in a height-limited case it is a realistic option. ### Product Disclosure (Amazon) - Manufacturer: Thermalright - Model: AXP90 X47 White-ri - ASIN: B09PHH3HR3 - Note: This article covers a manufacturer-made product based on Amazon listing details.