# Novonest H85K6 — 85mm Low-Profile Top-Flow CPU Cooler with Six Heat Pipes

> Novonest H85K6 summary. An 85mm-tall top-flow cooler with six 6mm copper heat pipes and a 120mm PWM fan. Broad socket support from Intel LGA1851/1700 to AMD AM5 makes it a practical pick for compact and Mini-ITX builds.

Tags: cpu_fan, novonest, h85, top-flow, low-profile, lga1700
Source: https://www.amazon.co.jp/dp/B0D9YFLHX2
Article page: https://web-autoai.com/articles/novonest-h85k6-85mm-low-profile-top-flow-cpu-cooler-with?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview
The Novonest H85K6 is a top-flow CPU air cooler that keeps its total height down to just 85mm. The manufacturer is listed as upHere and the model number is H85. Six 6mm copper heat pipes make direct contact with the CPU, and the design is rated for roughly 180W TDP.
Its main appeal is vertical clearance. Most tower-style side-flow coolers stand around 150mm tall, which often causes trouble in compact cases where the top panel or side panel gets in the way. The H85K6 sidesteps much of that problem. Because a top-flow layout pushes air downward, it also sends airflow across the VRM and memory area around the socket.
Cooling comes from a 120mm PWM fan built with a hydraulic bearing, a combination aimed at stable operation even at higher speeds. Socket support is broad: Intel LGA1851, LGA1700, LGA1200, LGA115x, LGA2011, LGA2066 and LGA1366, plus AMD AM5, AM4, AM3, AM2, AM3+, AM2+, FM2 and FM1. That range makes it easy to carry over between builds.

## Compatibility Guide
Socket coverage spans both current and legacy platforms. On the Intel side that means LGA1851 and LGA1700 down to LGA1366; on the AMD side it runs from AM5 and AM4 back to FM1. A fresh AM5 or LGA1700 build and a spare-parts secondary machine can both use the same cooler.
At 85mm tall, the H85K6 is most useful in slim cases and Mini-ITX chassis with tight CPU cooler limits. In a mid-tower with plenty of headroom, that low profile buys you little.
The design is described as avoiding memory slot conflicts, with the fan positioned so it does not overlap the RAM area. Real clearance still depends on socket placement and heatsink shape on your particular board, so check for interference before final assembly.
The 180W TDP figure is a cooling-capacity guideline, not a guarantee. Actual heat output varies with load and voltage settings, so this cooler suits mid-range CPUs running at stock settings better than high-end chips pushed hard.

## Product Info
Positioned as an entry-to-mid tier air cooler, the H85K6 pairs six heat pipes and a 120mm PWM fan with a low 85mm profile. That combination targets budget small-form-factor builds where height is the binding constraint.
Listed dimensions are roughly 123 mm long, 120 mm wide and 85 mm tall, with a weight of about 449 g. The fan supports automatic PWM temperature control and uses a hydraulic bearing. Mounting is designed to work without removing the fan, which simplifies installation and maintenance.

## Best Use Cases
- Builders putting together a Mini-ITX or slim case system: the 85mm height fits where taller coolers cannot, though it is not the right pick for sustained high-heat CPUs.
- Budget builders assembling a secondary or office machine: wide socket support lets you reuse spare boards and CPUs, but noise-focused buyers may want something quieter.
- Users who want top-flow cooling over the board area: downward airflow reaches the VRM and memory region, while cases with room for a large tower cooler will cool better with one.

## Things to Consider
The 180W rating is a guideline, and real headroom depends on CPU power draw and case airflow. Mid-range CPUs at stock settings should be fine, but a high-end chip under long sustained load will likely run warmer than you would like.
Top-flow coolers help the area around the socket, yet a large side-flow tower offers more heatsink surface area for pure heat dissipation. If cooling is the priority and your case has the height, a bigger cooler is the more sensible choice.
Broad socket support does not remove every installation quirk. Backplate design and mounting hole layout vary between boards, so confirm how the included mounting parts line up with your socket before you start.
## FAQ
Q: Will it fit an LGA1700 CPU directly?
A: LGA1700 is on the supported socket list. Actual mounting still depends on the motherboard backplate and hole layout, so check the socket and included mounting parts before installation.
Q: Does an 85mm height mean it fits any case?
A: Any case with at least 85mm of CPU cooler clearance should avoid height conflicts. Clearance can still vary with the motherboard cutout and socket position, so confirm the case spec sheet first.
Q: How does cooling compare with a large side-flow tower?
A: Six heat pipes and a 120mm fan help, but the slim profile means less surface area than a big tower. Choose a large cooler for hot CPUs in roomy cases, and the H85K6 when space is the priority.

### Product Disclosure (Amazon)
- Manufacturer: upHere
- Brand: ｎｏｖｏｎｅｓｔ
- Model: H85
- ASIN: B0D9YFLHX2
- Note: This article covers a manufacturer-made product based on Amazon listing details.
