# Novonest H45K6 — 45mm Low-Profile Top-Flow CPU Cooler with 6 Heat Pipes

> Novonest H45K6 summary. A 45mm-tall top-flow cooler with six 6mm copper heat pipes and a 90mm PWM fan, rated for a 150W TDP envelope.

Tags: cpu_fan, novonest, uphere, h45, low-profile, mini-itx
Source: https://www.amazon.co.jp/dp/B0FCFGGZNF
Article page: https://web-autoai.com/articles/novonest-h45k6-45mm-low-profile-top-flow-cpu-cooler-with-6?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview
The Novonest H45K6 is a low-profile, top-flow CPU cooler built by upHere, standing just 45mm tall. It pairs six 6mm copper heat pipes in a direct-contact layout with a dense aluminium fin stack and a slim 90mm PWM fan, and the company rates the design for CPUs up to a 150W TDP. The short height makes it a natural candidate for Mini ITX builds and other cramped chassis where a tower cooler simply will not fit.
What sets this model apart is the way the heat pipes are angled to stay clear of the memory slots. In small cases a top-flow cooler often blankets the RAM, but Novonest states that the H45K6 leaves the DIMM slots unobstructed regardless of how tall the memory heat spreaders are, so the cooler and the memory can coexist.
Pricing sits in the low 3,000-yen range, which places it firmly in the entry tier of air cooling. It supports Intel LGA1700, LGA1851, LGA1200 and LGA115X alongside AMD AM5 and AM4, so the same cooler can move between several generations of platforms.

## Compatibility Guide
Socket support covers Intel LGA1700, LGA1851, LGA1200 and LGA115X, plus AMD AM5 and AM4. Mounting uses the bundled bracket and fastening hardware, which is what allows one cooler to span so many generations of motherboards.
Because the total height is only 45mm, the H45K6 fits builds where CPU cooler clearance is tight, such as Mini ITX cases and slim layouts. Clearance limits differ from case to case, so check your own chassis specification before ordering.
Memory clearance is the headline claim here: the heat pipe arrangement is designed so the RAM slots are not blocked. That should make tall heat-spreader modules easier to live with, though motherboard layout still affects how close the surrounding components sit, so a quick dry fit is worthwhile.
A hydraulic bearing is used, and the rated service life is 40,000 hours.

## Product Info
Six heat pipes and a 90mm fan are a generous specification for the price, which makes the value proposition clear for budget small-form-factor builds.
For cooling figures, the rated ceiling is 150W TDP. The fan is quoted at up to 60 m³/h while keeping noise at or below 27 dB(A), and PWM control lets it slow down when the load drops.
Published dimensions are about 95 mm long by 95 mm wide by 45 mm tall, with a weight of roughly 299 g. The brand is Novonest, the manufacturer is upHere, and the model number is H45.

## Best Use Cases
- Builders putting together a Mini ITX secondary or living-room PC: the 45mm height and memory-friendly heat pipe layout make it easy to squeeze into a small chassis, though it is not the right pick for a high-heat flagship CPU.
- Budget-conscious users who want a quiet-leaning air setup: the PWM-controlled 90mm fan and hydraulic bearing keep things calm at low load, but performance chasers will want something larger.
- Anyone who recycles parts across platform generations: support for LGA1700, LGA1851, LGA1200, LGA115X, AM4 and AM5 means it carries over to a new board, while cases designed around big tower coolers have no need for it.

## Things to Consider
The 150W TDP figure is a cooling guideline, not a guarantee, and a high-clock flagship CPU under sustained full load will leave little headroom. If your processor draws serious power, a larger tower cooler or a liquid cooler is the safer route.
Top-flow designs push air across the VRM and memory, but they are also the layout most likely to collide with board heat sinks or tall components. Novonest claims the memory slots stay clear, yet case and motherboard combinations vary enough that a clearance check before installation is sensible.
Compared with larger air coolers in a similar price bracket, absolute cooling capacity may come up short. Deciding up front whether you value quietness and space efficiency or raw thermal headroom will make the choice much easier.
## FAQ
Q: Can it be mounted on an LGA1851 CPU without extra parts?
A: LGA1851 is listed among the supported sockets, and installation uses the included bracket. Check the backplate and mounting hole positions on your board before you start.
Q: Is a 45mm cooler enough for real workloads?
A: The design targets a 150W TDP envelope, so lower-power CPUs and compact builds should be well served. For a flagship chip running flat out, compare against a bigger cooler instead.
Q: Will tall memory heat spreaders get in the way?
A: The heat pipes are angled so the RAM slots are not blocked, according to the manufacturer. Motherboard layout still shifts the surrounding clearances, so verify the fit during assembly.

### Product Disclosure (Amazon)
- Manufacturer: upHere
- Brand: ｎｏｖｏｎｅｓｔ
- Model: H45
- ASIN: B0FCFGGZNF
- Note: This article covers a manufacturer-made product based on Amazon listing details.
