# MSI MAG A1000GL PCIE5 WHITE: Official Connectors and Fit Checks

> MSI MAG A1000GL WHITE from official specs: 1000W, 80 PLUS Gold, one PCI-E 5.1 (16 pin), four 6+2 pin, twelve SATA, 150 x 150 x 86 mm.

Tags: power-supply, msi, mag-a1000gl-pcie5, atx-3-1, 80plus-gold, white, 1000w
Source: https://www.amazon.co.jp/dp/B096Y5NQQ4
Article page: https://web-autoai.com/articles/msi-mag-a1000gl-pcie5-white-pc-1000w-atx31?lang=en

Prices and ratings change over time — check the article page for the current values.

---

This article examines the MSI MAG A1000GL WHITE 1000W power supply using only MSI's official Specification page (Japanese site).

## Overview

The official Power Watt of the MAG A1000GL is 1000W, its Efficiency Rating is 80 PLUS Gold, and Modular is listed as "Yes (fully modular)".

It has one "PCI-E 5.1 (16 pin)" connector and four 6+2 pin connectors. The short version: it is a fully modular PSU with both the newer-style and the older-style graphics power connectors. The dimensions are "150 x 150 x 86 mm" (DxWxH), and the fan size is 135 mm.

## Compatibility Guide

These are the fit checks that follow from the official spec table.

- **Case size check:** Dimensions (DxWxH) are "150 x 150 x 86 mm". The depth (D) is 150 mm, so compare it with your case's maximum PSU length (or, if the case gives a conditional limit such as a recommended value, with that value).
- **Graphics card power:** The graphics card connector rows are "PCI-E 5.1 (16 pin)" and "PCI-E (6+2 pin)". Their counts and wording are in the connector list in Product Info. Compare the type and number of power connectors on your card with that list.
- **Motherboard power:** "ATX (24 pin)" is 1 and "EPS (4+4 PIN)" is 2. Compare these with the CPU power connectors on your motherboard.
- **Storage and peripherals:** "SATA (15 pin)" is 12, "MOLEX (4 pin)" is 4 and "FDD (4 pin)" is 1.
- **Input:** Input Voltage is "100-240V~", Input Frequency is "50-60Hz", and PFC Type is "Active PFC".

## Product Info

Here are the key official values, with what each one means for a buyer.

**Connector list:** The connector rows in the official spec table are these seven.

- ATX (24 pin): 1
- EPS (4+4 PIN): 2
- PCI-E 5.1 (16 pin): 1 (600W)
- PCI-E (6+2 pin): 4
- SATA (15 pin): 12
- MOLEX (4 pin): 4
- FDD (4 pin): 1

**Capacity and efficiency:** Power Watt is 1000W and the Efficiency Rating is 80 PLUS Gold, and the official entry attaches a note of "up to 90 per cent" to that rating.

**Power Excursion:** The official value is 2000W, with a note giving the condition of up to 200 per cent of the PSU's rated power for 100μs. It describes tolerance to a very short spike; it is not a capacity you can draw continuously.

**Protections:** Protection is listed as "OCP / OVP / OPP / OTP / SCP / UVP", six abbreviations in all. Check the manual for what each protection covers.

**Fan:** Fan Size is 135 mm and the Fan Bearing is "Fluid Dynamic Bearing".

**Cabling:** Modular is "Yes (fully modular)", so you connect only the cables you need.

**Input:** The PFC Type is "Active PFC".

## Best Use Cases

- **Builders using a graphics card with older-style power connectors.** There are four "PCI-E (6+2 pin)" connectors. Compare that count with the power connectors on your card.
- **Builds with many drives.** "SATA (15 pin)" is listed as 12. Compare that count with the drives you plan to connect.
- **People who want a tidy build.** Being fully modular, it leaves unused cables out of the case.

## Things to Consider

Here is what to check before buying, following the official values.

First, the "ATX3.1" wording in the product title. If the version matters to you, confirm it in MSI's official documentation.

Second, the number of "PCI-E 5.1 (16 pin)" connectors. If you are planning more than one card that each take power from a "PCI-E 5.1 (16 pin)" connector, compare your plan with the counts in the connector list in Product Info.

Third, case fit. The depth is 150 mm. Because the unit is fully modular, the cable side needs room too. Look at your case's PSU length limit and leave space for routing.

Finally, the input conditions. The input voltage entry is "100-240V~" and the input frequency entry is "50-60Hz". Compare them with the outlets where the PC will run. See the maker's official spec table for full details.

## FAQ

**Q. How many "PCI-E 5.1 (16 pin)" connectors are there? **
A. The official table lists 1. The full wording of the row is in the connector list in Product Info.

**Q. How many 6+2 pin connectors are there? **
A. The official "PCI-E (6+2 pin)" entry is 4.

**Q. How many SATA (15 pin) connectors are there? **
A. The official "SATA (15 pin)" entry is 12. The table also lists "MOLEX (4 pin)" as 4 and "FDD (4 pin)" as 1.

**Q. What fan size and bearing does it use? **
A. The official entries give a fan size of 135 mm and a bearing type of "Fluid Dynamic Bearing".

### Product Disclosure (Amazon)
- Manufacturer: MSI
- Seller: Amazon.co.jp
- Fulfilled by: Amazon.co.jp
- ASIN: B096Y5NQQ4
- Note: This article covers a manufacturer-made product based on Amazon listing details.
