# LIANLI B4-mATX Mesh White — Compact 21.3L Micro-ATX Case with 360mm Radiator Support

> LIANLI B4-mATX Mesh White summary. A 21.3L Micro-ATX/Mini-ITX case that fits a 360mm radiator, a 140mm ATX PSU and a 358mm four-slot GPU.

Tags: case, lian-li, b4w, matx, mesh
Source: https://www.amazon.co.jp/dp/B0H6Q46898
Article page: https://web-autoai.com/articles/lianli-b4-matx-mesh-white-compact-213l-micro-atx-case-with?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview
The Lian Li B4-mATX Mesh White is a compact chassis built around Micro-ATX and Mini-ITX motherboards. Its model number is B4W, and the internal volume comes in at 21.3L. Despite the small footprint, the layout is flexible enough to support both horizontal and vertical orientations, which gives builders a way to match the case to the space they actually have.
Two 120mm fans come pre-installed, and the front panel uses a mesh design to keep airflow moving. A rotating rear fan bracket lets you angle the exhaust fan to suit the internal layout rather than forcing a single fixed position.
Dimensions are 420 mm long, 191 mm wide and 288 mm tall, with a weight of 3.8 kg. That puts it in the mid-range of compact cases, suitable for everything from a desk-side secondary build to a small gaming machine in the living room.

## Compatibility Guide
Motherboard support covers Micro-ATX and Mini-ITX only. An ATX board will not physically fit, so check the form factor of your motherboard before committing to this case.
Graphics cards can measure up to 358mm and occupy up to four slots. That leaves room for large air-cooled cards, and a GPU anti-sag bracket is included to support heavier models over time.
Power supplies are limited to ATX units up to 140mm in length, while cooling support reaches a 360mm all-in-one liquid cooler. Both can be accommodated in either the horizontal or vertical layout, so the orientation choice does not force you to give up the radiator or the PSU.

## Product Info
The B4W launched on July 3, 2026, and sits in the lower-mid price bracket at just over ten thousand yen. What sets it apart in that range is the combination of a 21.3L body with support for a 360mm radiator, a 140mm ATX power supply and a 358mm four-slot GPU.
With two 120mm fans included and a mesh front panel, the case is designed so that a build with minimal extra parts still gets reasonable airflow. The rotating rear fan bracket and the bundled anti-sag bracket round out the practical touches aimed at builders who want a small system without fighting the chassis.

## Best Use Cases
* Gamers with limited desk space who still want a large graphics card: the 358mm four-slot clearance means you do not have to downsize the GPU, though anyone planning an ATX motherboard build should look elsewhere.
* People building a secondary system for a living room or bedroom: horizontal and vertical orientation options make placement easier, and the mesh front with two included 120mm fans keeps cooling practical, but buyers chasing the quietest possible build should compare other options.
* Small-form-factor builders who want a 360mm liquid cooler: the 21.3L chassis can host a large radiator for a high-heat CPU, though anyone planning an elaborate custom water loop will need a bigger case.

## Things to Consider
Because the case is limited to Micro-ATX and Mini-ITX, moving over from an ATX build means replacing the motherboard as well. Check your existing parts before assuming a straight transfer.
PSU length is capped at 140mm for ATX units, so long high-capacity power supplies are off the table. Verify the dimensions of any PSU you plan to buy.
Fitting a 360mm radiator and a 358mm GPU into 21.3L leaves limited working room during assembly. If ease of building is a priority, a larger mid-tower is worth comparing against.
## FAQ
Q: Can I use an ATX motherboard?
A: No. Support is limited to Micro-ATX and Mini-ITX, so match the motherboard form factor to the case.
Q: Will a large graphics card fit?
A: Cards up to 358mm long and four slots thick are supported, and an anti-sag bracket is included for heavier models.
Q: What liquid cooling sizes work?
A: The case accepts all-in-one coolers up to 360mm, in either the horizontal or vertical layout.

### Product Disclosure (Amazon)
- Manufacturer: LIANLI
- Brand: Lian Li
- Model: B4W
- ASIN: B0H6Q46898
- Note: This article covers a manufacturer-made product based on Amazon listing details.
