# Lian Li O11 Vision White Review: Clearances, Cooling Layout and Pitfalls > O11 Vision White: 455mm GPU, 167mm cooler, 280mm E-ATX limit, side/bottom/rear-only fan mounts, no fans included. What to check first. Tags: pc-case, lian-li, o11-vision, dual-chamber, water-cooling, white-build, atx-mid-tower Source: https://www.amazon.co.jp/dp/B0CPL7HZX1 Article page: https://web-autoai.com/articles/lian-li-o11-vision?lang=en Prices and ratings change over time — check the article page for the current values. --- This article takes a close look at the Lian Li O11 Vision — White aluminum dual-chamber PC case: its clearances, how to plan its cooling, and the build pitfalls that are easy to miss. ## Overview The Lian Li O11 Vision White (model O11VW. US) is a dual-chamber ATX mid-tower case. It pairs steel and aluminum with 4.0mm and 3.0mm tempered glass, and the white finish shows off internal components and RGB lighting. It supports GPUs up to 455mm and ATX power supplies up to 220mm, and it takes 360mm radiators on both the side and the bottom, so full custom water-cooling builds are possible. The short version: this case suits people who want to show off their hardware through glass more than people who want the best possible cooling. According to the spec sheet, fans mount only on the side, bottom, and rear. There are no front or top fan mounts, so airflow has to be planned differently than in a typical front-mesh case. What you get in return is a large, clear view of the interior, which is what sets this case apart. Below, we use the spec-sheet numbers to answer three questions: will your parts fit, how should you lay out the fans, and what do buyers tend to discover only after the purchase? ## Compatibility Guide | Item | Support | What to check | |---|---|---| | Motherboard | E-ATX (up to 280mm) / ATX / Micro-ATX / Mini-ITX | E-ATX boards wider than 280mm will not fit | | Expansion slots | 6+1 | Check the included accessories before planning a vertical GPU | | GPU length | Up to 455mm | A side radiator may reduce the usable clearance | | CPU cooler height | Up to 167mm | Check large air coolers to the millimeter | | PSU | ATX, up to 220mm, bottom mount | Leave room for cable routing | | Storage | 2x 2.5-inch (rear), 2x 3.5-inch HDD / 2.5-inch SSD (cage) | Maximum of two 3.5-inch HDDs | E-ATX is the main motherboard concern. E-ATX board widths vary, and this case accepts boards only up to 280mm wide. Larger workstation-class boards over 280mm will not fit, so check the board width in millimeters. ATX and smaller boards are not affected. The 455mm GPU limit is generous enough for current flagship cards. However, mounting a 360mm radiator and fans on the side may reduce the internal clearance by their combined thickness. Check the official manual or product page for the limits with a radiator installed. The 6+1 slots allow vertical GPU mounting, but confirm on the product page what accessories, such as a riser cable, are included. CPU cooler height is limited to 167mm. Many large dual-tower air coolers are in the 160mm range, and some sit right at or slightly above 167mm, so compare the exact height before buying. The PSU mounts at the bottom and can be up to 220mm long. Standard ATX units fit easily, but in a dual-chamber case the cables must bend within a small rear compartment. A slightly shorter, fully modular PSU is easier to work with than one that uses the full 220mm. The front I/O includes one USB Type-C port. It only works if your motherboard has a front-panel USB Type-C header. This is easy to miss, so check your board's specs. ## Product Info | Item | Value | |---|---| | Dimensions (D×W×H) | 480mm × 304mm × 464.5mm | | Weight | 11.6 kg | | Materials | Steel, aluminum, 4.0mm tempered glass, 3.0mm tempered glass | | Fan support | Side: 3x120mm / 2x140mm, Bottom: 3x120mm / 3x140mm, Rear: 1-2x120mm | | Radiator support | Side: 360/240/280mm, Bottom: 360/240/280mm, Rear: 240/120mm | | I/O ports | Power button, reset button, 2x USB 3.0, 1x USB Type-C, audio | The O11 Vision White is a dual-chamber case that launched in late 2023. It sits in the high-end mid-tower segment and is aimed at water-cooling enthusiasts and showcase builders. It measures 480mm deep, 304mm wide, and 464.5mm tall. That is short for a mid-tower but noticeably wider than most. On a desk, allow for the 480mm depth plus room for cables at the back. The case weighs 11.6 kg empty and gets heavier once components and water cooling go in, so consider your desk's load limit and whether you will need to move the finished build. On Amazon. co. That is a very strong score, but ratings for cases like this tend to reflect satisfaction with the looks. For cooling and ease of building, weigh the points in this article as well. A one-year warranty is typical, but terms can differ for parallel imports or third-party sellers, so check with the seller before buying. Prices change often, so check the latest price on the product page (see Things to Consider for a note on the captured price data). ## Cooling and Airflow Fan layout is the key to getting the most out of this case. According to the spec sheet, fans mount on the side (3x120mm or 2x140mm), the bottom (3x120mm or 3x140mm), and the rear (1-2x120mm). Filled with 120mm fans, that is up to eight fans. A common layout is bottom intake blowing onto the GPU, a 360mm CPU AIO on the side, and rear exhaust. The case is not designed around a top exhaust, so warm air has to leave through the rear and side. Adding intake fans without matching exhaust tends to trap heat near the top. After the build is complete, watch GPU and CPU temperatures under heavy load and adjust whether the side fans pull air in or push it out. For a custom loop, you can run 360mm radiators on both the side and the bottom and cool the CPU and GPU separately or in one loop. Check that the combined radiator and fan thickness will clear everything, using the actual radiators you plan to install. The rear takes a 240mm or 120mm radiator. Air cooling works too, but intake comes only from the bottom and side, so do not expect the same temperatures as a front-mesh case. If you go with air cooling, choose a cooler under 167mm and make sure the rear exhaust has enough airflow. ## Build Tips In the dual-chamber layout, the PSU, storage, and cables all share the space behind the motherboard tray. That keeps the view clean, but a long PSU and a full drive cage can compete for room back there. Plan your cable routes before installing the motherboard to avoid rework later. The tempered glass panels are heavy and tedious to replace if they break. Lay removed panels flat on a soft cloth instead of leaning them against something. If you are putting a radiator or fans on the bottom, it is usually easier to install them before the motherboard and GPU. In a white case, black cables and parts are very visible through the glass. If appearance matters, white sleeved cables and white fans give a more consistent look. Fans are not included, so choose their color and count early and buy them along with your other parts. ## Recommended For - Water-cooling builders: with 360mm radiators on both the side and bottom, you can water-cool both the CPU and GPU, and the dual-chamber layout keeps cables out of sight. - Gamers who care about looks: the large tempered glass panels put your components and RGB lighting on display, and the white finish suits light-themed builds. - Users of large components: 455mm of GPU clearance and support for PSUs up to 220mm let you choose flagship cards without worrying about length. - Anyone who needs a short case: at 464.5mm tall, it is easier to fit where height is limited, as long as you have the width. ## Who Should Skip It - Builders who put cooling first: a front-mesh case with strong front intake usually runs cooler with the same number of fans. - Anyone who needs three or more HDDs: the case holds only two 3.5-inch drives. - Budget-focused buyers: no fans are included, so plan on buying six to eight fans on top of the case. - Users with limited space: at 304mm wide and 11.6 kg, it is bulky and heavy for a small desk. ## Things to Consider A note on the price data: when it was captured on May 31, 2026, the Amazon. co. jp listing (sold and shipped by 海亀通商) showed a price that looked unusually high for a mid-tower case of this class. Third-party listings and stock levels can inflate prices significantly. Prices change often, so check the latest price on the product page and compare other retailers before buying. No fans are included. The case cannot cool anything until you add fans, so order them with it. Filling the side, bottom, and rear with 120mm fans takes up to eight, which may also call for a fan hub or controller. E-ATX boards wider than 280mm will not fit. The I/O panel is on the lower side panel instead of the front, so depending on where the case sits it may be hard to reach. Decide which side of the desk it will go on before you buy. The USB Type-C port needs a matching motherboard header. The dual-chamber layout leaves limited cable space at the back, and tidy cable management takes some practice. If this is your first build, give yourself extra time. The Amazon listing identifies the product as Lian Li, but it is sold by a third-party retailer. Before ordering, check the listing images and title to confirm the color (White) and the model number (O11VW). ## FAQ **Q. Does it come with fans? ** A. No. Depending on how you fill the side, bottom, and rear mounts, you will need up to eight 120mm fans. **Q. Can I install a 360mm AIO? ** A. Yes. Both the side and bottom accept 360mm radiators. Check the official manual to confirm that the combined radiator and fan thickness will fit. **Q. Does it support E-ATX motherboards? ** A. Yes, if the board is 280mm wide or narrower. Wider boards will not fit. **Q. Will a large air cooler fit? ** A. Coolers up to 167mm tall will fit. Some large dual-tower coolers are right around that height, so check the exact figure. **Q. How heavy is it once built? ** A. The case alone weighs 11.6 kg. Components and water cooling add more, so check the load limit of wherever you plan to place it. ### Product Disclosure (Amazon) - Manufacturer: Lian Li - Seller: 海亀通商 - Fulfilled by: 海亀通商 - ASIN: B0CPL7HZX1 - Note: This article covers a manufacturer-made product based on Amazon listing details.