# ID-COOLING SE-610-XT BASIC — Single-Tower CPU Air Cooler with Six Heat Pipes > ID-COOLING SE-610-XT BASIC summary. A single-tower air cooler pairing six copper heat pipes with a 120mm high-static-pressure fan. The slim design limits memory interference, and it supports Intel LGA1700 and AMD AM5. Tags: cpu_fan, id-cooling, se-610-xt, air-cooler, lga1700, am5 Source: https://www.amazon.co.jp/dp/B0DTKG7Q4Y Article page: https://web-autoai.com/articles/id-cooling-se-610-xt-basic-single-tower-cpu-air-cooler-with?lang=en Prices and ratings change over time — check the article page for the current values. --- ## Overview ID-COOLING builds its reputation around cooling hardware, and the SE-610-XT BASIC sits in the approachable end of its lineup. It is a single-tower air cooler that pairs six copper heat pipes with a 120mm high-static-pressure fan, a combination aimed at balancing thermal headroom against an easy install. The heatsink is kept narrow across its width, which is a deliberate choice to reduce how far the tower reaches toward the memory slots. That makes it a friendlier fit for builds using taller memory modules than a wide side-flow tower would be. The fan uses a high-quality bearing, and the design is pitched at long, quiet operation rather than flashy lighting or a massive fin stack. Socket support is stated as Intel LGA1700 and AMD AM5, which puts it squarely in reach of current mainstream platforms. This is not a product for someone chasing maximum surface area or elaborate RGB; it is for a practical build that needs to stay cool and quiet without spending much. ## Compatibility Guide Socket fit is the first thing to check. With LGA1700 and AM5 named in the product information, the cooler lines up naturally with recent Core processors and Ryzen 7000/9000 systems. If your board uses a different socket, the data here does not confirm support, so plan around a cooler whose compatibility is explicitly listed instead. The form factor is a single-tower side-flow design with one 120mm fan. Because the tower does not stretch far toward the memory side, it suits builds where memory clearance matters. Actual clearance still depends on the motherboard layout and the width of the case, so measure the space inside the chassis before assembly. Power draw from the cooler itself is limited to the fan, so it does not drive the system PSU decision. Size the power supply around the CPU and graphics card as you normally would. Memory type and storage interfaces are not part of the cooler's fit criteria, so those choices follow the motherboard specification. ## Product Info Check the retailer's page for the latest price. With six heat pipes and a 120mm fan, it lands in the entry-to-mid range of air cooling. It gives up fin area and fan count compared with premium large towers, but keeps the price down and stays easy to work with for everyday gaming and productivity builds. Dimensions are listed as roughly 151 mm long, 128 mm wide and 151 mm tall, with a weight of about 898 g. It is distributed as a domestic retail product in Japan, with online retailers serving as the main purchase channel. ## Best Use Cases * First-time cooler swappers: the six-heat-pipe, single-120mm-fan layout is easy to understand as a step up from a stock cooler, but anyone on an older socket should look elsewhere because support is limited to LGA1700 and AM5. * Quiet-leaning air builds: the high-quality bearing fan and stable cooling under load suit a build that does not prioritize lighting or a large radiator, though people chasing extremely low fan speeds may want more headroom. * Builds with tall memory: the slim heatsink is designed to limit memory interference, making it a comfortable match when the memory area needs breathing room, while those wanting maximum fin area should skip it. ## Things to Consider Socket coverage is the biggest caveat. Support is stated for Intel LGA1700 and AMD AM5 only, so confirm your motherboard socket before buying; if it is not one of those two, this cooler drops off your list entirely. On thermal capacity, a six-heat-pipe single tower has less margin for a high-end CPU running sustained heavy loads. If you plan to push a power-hungry chip to its limits, a larger tower or a liquid cooler is the better direction. On a more modest CPU, the cooler avoids being overkill and keeps the price-to-performance balance sensible. Check vertical clearance in the case as well. A height of about 151 mm is not trivial in a compact chassis, so compare it against the case's stated cooler clearance before assembly. The single 120mm fan also means any additional fan is a separate purchase. ## FAQ Q: Can it be used on sockets other than LGA1700 and AM5? A: The product information names Intel LGA1700 and AMD AM5. Mounting on other sockets is not stated, so choosing a cooler with confirmed support is the safer route. Q: Will it fit with tall memory modules installed? A: The slim heatsink is designed to reduce memory interference. Real clearance still depends on the motherboard layout, so check the slot positions before assembly. Q: Is it worth replacing a stock cooler? A: With six copper heat pipes and a 120mm high-static-pressure fan, the design emphasizes heat dissipation. It makes sense if you want quieter, steadier cooling, but a power-hungry CPU pushed hard is better served by a larger cooler. ### Product Disclosure (Amazon) - Manufacturer: ID-COOLING - Model: SE-610-XT BASIC - ASIN: B0DTKG7Q4Y - Note: This article covers a manufacturer-made product based on Amazon listing details.