# Fractal(フラクタル) Design Terra Jade mini-ITX SFX電源対応 PCケースアルミニウムヒスイ FD-C-TER1N-03 CS8275

> A 10.4L mini-ITX case with an aluminium shell and solid walnut front. It takes SFX or SFX-L power supplies, a GPU up to 322mm, one 120mm bottom fan and two 2.5-inch SSDs.

Tags: case, fractal-design, terra, mini-itx, sfx
Source: https://www.amazon.co.jp/dp/B0C6P9ZB95
Article page: https://web-autoai.com/articles/fractal-design-terra-jade-mini-itx-sfx-pc-fd-c-ter1n-03?lang=en

Prices and ratings change over time — check the article page for the current values.

---

## Overview
The Fractal Design Terra Jade is a 10.4L small-form-factor chassis built around a mini-ITX motherboard and an SFX or SFX-L power supply. Its identity comes from the materials: an aluminium outer shell paired with a solid walnut front panel, finished in a muted jade green. The model number is FD-C-TER1N-03, and it is a case you buy as much for how it looks on a desk as for how little space it occupies.
Inside, a movable central spine lets you shift clearance between the graphics card side and the CPU cooler side. Fractal rates it for a GPU up to 322mm long, a single 120mm bottom fan, and two 2.5-inch SSDs, which is enough headroom for a compact gaming build. The chassis measures 343 x 153 x 218mm and weighs 3.1 kg, so it is dense but not immovable.
Front connectivity covers one USB 3.2 Gen 2x2 Type-C port and one USB 3.0 Type-A port, which suits people who plug in fast external drives or modern peripherals. This is not an entry-level first-build case; it is aimed at builders who have a tight footprint to work with and care about finish.

## Compatibility Guide
Motherboard support is mini-ITX only. ATX and microATX boards will not physically fit, so confirm the form factor before ordering anything else. The power supply must be SFX or SFX-L; a standard ATX unit is out of the question. When picking an SFX unit, cable flexibility matters as much as wattage in a space this tight.
The critical constraint is the sliding central spine. Its position changes the maximum GPU width and the maximum CPU cooler height, so a thicker graphics card forces a lower-profile cooler, and a tall air cooler forces a slimmer GPU. Check the GPU height and width together with the cooler height against the manual before committing to parts.
Storage is limited to two 2.5-inch SSDs, with M.2 capacity depending on the motherboard you choose. Cooling relies on a single 120mm bottom fan, and because the GPU sits close to the CPU, airflow planning deserves real attention. If you use the included PCIe 4.0 riser cable with a PCIe 5.0 motherboard or graphics card, set the BIOS or UEFI link speed to PCIe Gen4 to avoid negotiation problems through the riser.

## Product Info
The aluminium body and solid walnut front account for much of that premium, so it does not compete on cost per litre.
Its market position is a compact, premium-feeling enclosure for people who value appearance and desk footprint over raw expansion. It is not the budget route into small-form-factor building; it is the choice for a machine that will sit in plain sight in a study or living room.

## Best Use Cases
* Builders with a cramped desk who need the tower itself to shrink: the 10.4L footprint tucks beside a monitor, and the bottom fan plus direct GPU mounting keeps a small build viable. Skip it if you plan to reuse an ATX board or ATX PSU.
* People who want a PC that blends into a room: the aluminium and walnut combination reads very differently from a mesh-front gaming box, making it a good fit for a living-room or study machine. Not for anyone who prioritises maximum expansion.
* Experienced builders who have checked the dimensional limits and want a compact gaming setup: the 322mm GPU clearance leaves room for mid-range cards. Not the right pick if a large air cooler is non-negotiable.

## Things to Consider
The inability to take an ATX motherboard or ATX power supply is a hard limit. If you were hoping to carry parts over from an existing build, budget for a mini-ITX board and an SFX unit as well.
The sliding spine means GPU width and CPU cooler height trade off against each other, so decide early which one matters more. Trying to fit a tall card and a large air cooler at the same time is not realistic here.
Cooling headroom is modest with a single 120mm bottom fan, so a high-power GPU under sustained load will run warmer than in a larger case. A mid-range card paired with a low-profile cooler is the more comfortable combination. If expansion and thermal margin matter more than footprint, compare against larger cases before deciding.
## FAQ
Q: Can I install a microATX motherboard?
A: No. Support is mini-ITX only, and microATX or ATX boards will not physically fit.
Q: Does it accept an ATX power supply?
A: It requires an SFX or SFX-L unit. ATX power supplies are not supported, so plan on an SFX model if you are buying new.
Q: Will a large graphics card fit?
A: The case supports GPUs up to 322mm, but the spine position changes the maximum GPU width and CPU cooler height. Verify the GPU height and width against the cooler height in the manual before purchase.

### Product Disclosure (Amazon)
- Model: FD-C-TER1N-03
- ASIN: B0C6P9ZB95
- Note: This article covers a manufacturer-made product based on Amazon listing details.
